MATERIAL SAFETY DATA SHEET
SikaCure 4900 / 4901 / 4902
HMIS
HEALTH 3
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Automotive Sika Tivoli GmbH
30,800 Stephenson Highway Reichsbahnstr. 99
Madison Heights, MI 48071 Hamburg D-22502 Germany
Company Contact: EHS Department Company Contact: Wolfgang Trenkner
Telephone Number: 201-933-8800 Telephone Number: 040 54002334
FAX Number: 201-933-9379 FAX Number: 040 54002588
Web Site: www.sika-automotive.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 None Given
INTERNATIONAL: 703-527-3887
Issue Date: 03/10/2006
Product Name: SikaCure 4900 / 4901 / 4902
CAS Number: Not Established
MSDS Number: 3855
Product Code: I490815, T4902C014
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
ALIPHATIC POLYISOCYANATE POLYMER 28182-81-2
HEXAMETHYLENE DIISOCYANTE 822-06-0 0.1 - 1
PROPYLENE CARBONATE 108-32-7
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
Can cause skin irritation. Can cause skin sensitization.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
Can cause respiratory tract irritation.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
SikaCure 4900 / 4901 / 4902
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
give one or two cups of water to drink.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: > 250 掳F > 123 掳C
Autoignition Point: N/A 掳F N/A 掳C
Fire And Explosion Hazards
Product does not present an explosion hazard. During a fire, irritating and/or toxic gases and aerosols from the
decomposition/combustion products may be present.
Extinguishing Media
Use the appropriate extinguishing media for the surrounding fire. Use CO2 (Carbon Dioxide), dry chemical, or
foam.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Not for internal consumption.
Handling Precautions
Use only with adequate personal protection.
Storage Precautions
Keep from freezing. Store only in original container.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
SikaCure 4900 / 4901 / 4902
8. Exposure Controls/Personal Protection - Continued
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Ingredient(s) - Exposure Limits
HEXAMETHYLENE DIISOCYANTE
ACGIH TLV: 0.034 mg/m3;.005 ppm
ACGIH STEL: Not Established
OSHA PEL: Not Established
OSHA STEL: Not Established
9. Physical And Chemical Properties
Appearance
Liquid, various colors
Odor
Characteristic
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 1 gram / cubic centimeter
Percent Volatiles: 19.7% (organic solvents)
Vapor Pressure: N/A
Vapor Density: N/
pH Factor: N/A
Solubility: Dispersible (solubility in water)
Viscosity: 700 mPas
Solids Content: 80.3%
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
SikaCure 4900 / 4901 / 4902
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
HEXAMETHYLENE DIISOCYANTE (822-06-0) 0.1 - 1 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
HEXAMETHYLENE DIISOCYANTE
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
16. Other Information
HMIS Rating
H eal th: 3
F i re : 1
Reactivity: 0
Personal Protection: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 02/22/2004
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
Page 4 of 5
MATERIAL SAFETY DATA SHEET
SikaCure 4900 / 4901 / 4902
Disclaimer - Continued
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
Sika Automotive
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|