MATERIAL SAFETY DATA SHEET
SikaForce 7570, Part B
HMIS
HEALTH *2
FLAMMABILITY 1
REACTIVITY 1
H
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Tivoli GmbH
30800 Stephenson Highway Reichsbahnstr. 99
Madison Heights, MI 48071 U.S.A. Hamburg D-22502 Germany
Company Contact: EHS Department Company Contact: Wolfgang Trenkner
Telephone Number: 201-933-8800 Telephone Number: 040 54002334
FAX Number: 201-933-9379 FAX Number: 040 54002588
Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 None Given
INTERNATIONAL: 703-527-3887
Issue Date: 01/19/2006
Product Name: SikaForce 7570, Part B
CAS Number: Not Established
Chemical Family: Isocyanate based hardener
MSDS Number: 3792
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
4,4' -DIPHENYLMETHANE DIISOCYANATE (MDI) 101-68-8 50 - 100
ALIPHATIC POLYISOCYANATE 28182-81-2 10 - 25
HEXAMETHYLENE DIISOCYANATE 822-06-0 < 1
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
Causes skin irritation. Prolonged and/or repeated skin contact may cause an allergic reaction/sensitization.
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation. May cause an allergic respiratory reaction / sensitization after prolonged or
Page 1 of 5
MATERIAL SAFETY DATA SHEET
SikaForce 7570, Part B
3. Hazards Identification - Continued
Inhalation Hazards - Continued
repeated contact.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
wash mouth out with water. Seek medical attention immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: 300 掳F 150 掳C
Fire And Explosion Hazards
None Known
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Not for internal consumption.
Handling Precautions
Keep container closed when not in use. Use only with adequate ventilation.
Storage Precautions
Store in a cool, dry, well-ventilated area between 60 - 80 F (15 - 25 C). Keep container tightly closed. Keep away
from food, beverages and animal feedstocks. Protect from frost, heat and direct sunlight, and atmospheric
moisture and water.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
SikaForce 7570, Part B
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable exposure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
4,4' -DIPHENYLMETHANE DIISOCYANATE (MDI)
ACGIH TLV-TWA 0.005 ppm
ACGIH TLV-TWA 0.051 mg/m3
OSHA PEL-CEILING 0.020 ppm
OSHA PEL-CEILING 0.2 mg/m3
HEXAMETHYLENE DIISOCYANATE
ACGIH TLV-TWA 0.005 ppm
9. Physical And Chemical Properties
Appearance
Opaque
Odor
Characteristic
Chemical Type: Mixture
Physical State: Liquid
Specific Gravity: 1.2
Percent VOCs: 0.01
Solubility: Reacts with Water
Viscosity: 20000 mPas @20C
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None known when handled according to prescribed instructions. With water, formation of CO2. Possible rise of
pressure in closed containers.
Hazardous Decomposition Products
CO, CO2, Nitrogen Oxides
Possible in traces of Isocyanates
Page 3 of 5
MATERIAL SAFETY DATA SHEET
SikaForce 7570, Part B
11. Toxicological Information
Ingredient(s) - Carginogenicity
4,4' -DIPHENYLMETHANE DIISOCYANATE (MDI)
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Single containers less than 5,000 lbs. are not regulated.
Single containers with 5,000 lbs. or more of 4,4'-Methylene Diphenyl Diisocyanate are regulated as: Other
Regulated Substances, Liquid, NOS (Methylene Diphenyl Diisocyanate).
Hazard Class
9
DOT Identification Number
UN3082
Freight Class
Packing Group III
Additional Shipping Paper Description
4,4'-Diphenylmethane Diiscoyanate (MDI) - RQ 5,000 lbs
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
4,4' -DIPHENYLMETHANE DIISOCYANATE (MDI) (101-68-8) 50 - 100 %
HEXAMETHYLENE DIISOCYANATE (822-06-0) <1 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
4,4' -DIPHENYLMETHANE DIISOCYANATE (MDI)
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
Page 4 of 5
MATERIAL SAFETY DATA SHEET
SikaForce 7570, Part B
15. Regulatory Information - Continued
Ingredient(s) - U.S. Regulatory Information - Continued
HEXAMETHYLENE DIISOCYANATE
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
Ingredient(s) - State Regulations
4,4' -DIPHENYLMETHANE DIISOCYANATE (MDI)
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
HEXAMETHYLENE DIISOCYANATE
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New York City - Hazardous Substance
16. Other Information
HMIS Rating
Health: *2
F i re : 1
Reactivity: 1
PP E: H
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|