MATERIAL SAFETY DATA SHEET
Sikaflex庐-2K/MS Part B
HMIS
HEALTH 1
FLAMMABILITY 0
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Den Braven Sealants
30800 Stephenson Highway 4903 RC Oosterhout (NB)
Madison Heights, MI 48071 U.S.A. The Netherlands
Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: +31 (0) 162 491000
FAX Number: 201-933-9379
Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 Mr. Chris Smith: 0031 622393297
INTERNATIONAL: 703-527-3887
Issue Date: 01/18/2007
Product Name: Sikaflex庐-2K/MS Part B
CAS Number: Not Established
MSDS Number: 4045
Product Code: experimental
2. Composition/Information On Ingredients
Curing agent based on plasticizers, inorganic fillers and additives.
EMERGENCY OVERVIEW
Smooth pigmented paste. Unknown hazards.
3. Hazards Identification
Eye Hazards
Contact can cause irritation.
Skin Hazards
Contact may cause irritation.
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
Irritation of the nose, throat, and lungs may result from over-exposure to vapors or mist from heated material.
Page 1 of 4
MATERIAL SAFETY DATA SHEET
Sikaflex庐-2K/MS Part B
3. Hazards Identification - Continued
Chronic/Carcinogenicity Effects
None known.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Rinse mouth out with water.
Seek medical attention immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention immediately.
5. Fire Fighting Measures
Flash Point: NE 掳F
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate personal protective equipment (PPE). Contain spill and collect with
absorbent material, such as sand or dirt, and transfer into suitable containers. Ventilate enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep containers tightly closed. Keep out of reach of children. Not for internal consumption.
Handling Precautions
Handle in well ventilated area. Store in closed packages away from direct sunlight.
Storage Precautions
Store in a dry place. Ideal storage temperature is 41F (5C) to 77F (25C).
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Page 2 of 4
MATERIAL SAFETY DATA SHEET
Sikaflex庐-2K/MS Part B
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use.
Other/General Protection
Wash thoroughly after handling.
9. Physical And Chemical Properties
Appearance
Viscous Paste Pigmented
Odor
Weak
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/A 掳F
Specific Gravity: 1.30 g/ml
Percent VOCs: N/A
Packing Density: N/A
Vapor Pressure: N/A
Solubility: Partially soluble
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
CO, CO2
Avoid heat or storage below freezing.
11. Toxicological Information
Chronic/Carcinogenicity
None Listed
Mixture untested.
12. Ecological Information
No data.
Page 3 of 4
MATERIAL SAFETY DATA SHEET
Sikaflex庐-2K/MS Part B
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 1
F i re : 0
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201 933 8800
Disclaimer
The information contained in this Material Safety Data Sheet applies only to the actual Sika Corporation ("Sika")
product identified and described herein. This information is not intended to address, nor does it address the use
or application of the identified Sika product in combination with any other material, product or process. All of the
information set forth herein is based on technical data regarding the identified product that Sika believes to be
reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the
warnings and instructions on the product's current Technical Data Sheet, product label and Material Safety Data
Sheet for each Sika product, which are available at web site and/or telephone number listed in Section 1 of this
MSDS.
SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS
INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR
CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A
MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY
OTHERS.
All sales of Sika products are subject to its current terms and conditions of sale available at www.sikacorp.com or
201-933-8800.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
Page 4 of 4
|