MATERIAL SAFETY DATA SHEET
SikaFast 3083N
HMIS
HEALTH *2
FLAMMABILITY 1
REACTIVITY 1
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
30800 Stephenson Highway 30800 Stephenson Highway
Madison Heights, MI 48071 U.S.A. Madison Heights, MI 48071 U.S.A.
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikaindustry.com Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 03/30/2005
Product Name: SikaFast 3083N
CAS Number: Not Established
Chemical Family: Benzoyl Peroxide Paste
MSDS Number: 3448
Product Code: 3083993
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
BENZOYL PEROXIDE 94-36-0 20 - 30
BISPHENOL A/EPICHLOROHYDRIN RESIN 25068-38-6 20 - 30
TRICRESYL PHOSPHATE 1330-78-5 20 - 30
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
May cause skin irritation. Prolonged and/or repeated skin contact may cause an allergic reaction/sensitization.
Ingestion Hazards
Harmful if swallowed.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
SikaFast 3083N
3. Hazards Identification - Continued
Inhalation Hazards
May cause nose, throat, and lung irritation.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. If victim is fully conscious,
give one or two cups of water or milk to drink. Never give anything by mouth to an unconscious victim. Seek
medical attention immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: N/A 掳F
Fire And Explosion Hazards
None Known.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Not for internal consumption.
Handling Precautions
Avoid breathing vapor.
Storage Precautions
Keep away from heat, sparks, flame, and other sources of ignition. Do not store close to amines, strong acids,
and strong bases. Store in a dry place. Keep container tightly closed.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
SikaFast 3083N
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable exposure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
BENZOYL PEROXIDE
ACGIH TLV-TWA 5 mg/m3
OSHA PEL-TWA 5 mg/m3
9. Physical And Chemical Properties
Appearance
Black Paste
Odor
No odor
Chemical Type: Mixture
Physical State: Solid
Specific Gravity: 1.1-1.3
Solubility: Insoluble in water
10. Stability And Reactivity
Stability: Unstable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Open flames, sparks, heat, electrical and static discharge
Incompatible Materials
Strong acids, strong bases, amines and metal salts (catalysts).
Hazardous Decomposition Products
CO, CO2, Carbon, and possibly flammable gases.
11. Toxicological Information
Conditions Aggravated By Exposure
Eye disease, skin disorders and allergies, chronic respiratory conditions.
Page 3 of 5
MATERIAL SAFETY DATA SHEET
SikaFast 3083N
11. Toxicological Information - Continued
Ingredient(s) - Carginogenicity
BENZOYL PEROXIDE
Listed In The IARC Monographs
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
BENZOYL PEROXIDE (94-36-0) 20 - 30 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
BENZOYL PEROXIDE
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
OSHA Process Safety Management - 1910.119 App A Hazardous Chemical
SARA - Acute Health Hazard
SARA - Chronic Health Hazard
SARA - Fire Hazard
SARA - Reactivity Hazard
SARA - Sudden Release Of Pressure Hazard
Ingredient(s) - State Regulations
BENZOYL PEROXIDE
New Jersey - Workplace Hazard
New Jersey - Environmental Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
Page 4 of 5
MATERIAL SAFETY DATA SHEET
SikaFast 3083N
16. Other Information
HMIS Rating
Health: *2
F i re : 1
Reactivity: 1
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201 933 8800
This MSDS Supercedes A Previous MSDS Dated: 10/18/2004
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corp.
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|