MATERIAL SAFETY DATA SHEET
Page 1 of 4
Sikaflex庐 295 UV
HMIS
HEALTH *2
FLAMMABILITY 1
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
30800 Stephenson Highway 30800 Stephenson Highway
Madison Heights, MI 48071 U.S.A. Madison Heights, MI 48071 U.S.A.
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikaindustry.com Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 04/07/2005
Product Name: Sikaflex庐 295 UV
Chemical Family: Polyurethane
MSDS Number: 3556
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
POLYISOCYANATE PREPOLYMER Trade Secret
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
May cause skin irritation. Prolonged and/or repeated skin contact may cause an allergic reaction/sensitization.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
May cause nose, throat, and lung irritation. May cause an allergic respiratory reaction / sensitization after
prolonged or repeated contact.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
MATERIAL SAFETY DATA SHEET Page 2 of 4
Sikaflex庐 295 UV
4. First Aid Measures - Continued
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Seek medical attention
immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration. Seek medical attention immediately.
5. Fire Fighting Measures
Flash Point: 213 掳F 101 掳C
Autoignition Point: N/AV 掳F
Lower Explosive Limit: N/AV
Upper Explosive Limit: N/AV
Fire And Explosion Hazards
During a fire, irritating and/or toxic gases and aerosols from the decomposition/combustion products may be
present.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Not for internal consumption.
Handling Precautions
Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors, and static
electricity). Condition to 65 - 85F before using.
Storage Precautions
Store in tightly closed container and protect from moisture and foreign material. Storage temperature 40F
minimum - 95F Maximum. If closed container of material is exposed to heat, pressure can build up. If moisture
enters drum, pressure may build up due to reaction. At maximum storage temperature noted, material may
polymerize without hazard. Ideal storage temperature is 50 - 81F.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
MATERIAL SAFETY DATA SHEET Page 3 of 4
Sikaflex庐 295 UV
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure (Long sleeve shirt and long
pants). Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
9. Physical And Chemical Properties
Appearance
Black Paste
Odor
Aromatic
Chemical Type: Mixture
Physical State: Solid
Melting Point: N/AV 掳F
Boiling Point: N/AV 掳F
Specific Gravity: 1.2 g/cm3
Percent VOCs: 1.1
Packing Density: 10.3 lbs / gallon
Vapor Pressure: N/AV
Vapor Density: N/AV
Solubility: Insoluble
Evaporation Rate: Slower than ether
VOC content: 13.1 grams/liter
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
Open flame
Incompatible Materials
Water, Alcohols, Amines
Hazardous Decomposition Products
CO, CO2, Oxides of Nitrogen
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
No Data Available...
MATERIAL SAFETY DATA SHEET Page 4 of 4
Sikaflex庐 295 UV
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
16. Other Information
HMIS Rating
Health: *2
F i re : 1
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: (201) 933 - 8800
This MSDS Supercedes A Previous MSDS Dated: 03/30/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
|