MATERIAL SAFETY DATA SHEET
Sika Primer 206 G + P
HMIS
HEALTH *2
FLAMMABILITY 3
REACTIVITY 1
H
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Schweiz AG
201 Polito Ave Tuffenwies 16
Lyndhurst, NJ 07071 Zurich, Schweiz CH-8048 Switzerland
Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: +411 436 40 40
FAX Number: 201-933-9379 FAX Number: +411 436 4584
Web Site: www.sikausa.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 1-800-424-9300
INTERNATIONAL: 703-527-3887 International: 1-703-527-3887
Issue Date: 11/07/2005
Product Name: Sika Primer 206 G + P
CAS Number: Not Established
Chemical Family: Solvent based polyisocyanate primer
MSDS Number: 3761
Product Code: I60B100
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
ETHYL ACETATE 141-78-6
GLYCOL ETHER PM ACETATE 108-65-6
HDI Homopolymer 28182-81-2
N-BUTYL ACETATE 123-86-4
TRIS (P-ISOCYANATOPHENYL) THIOPHOSPHATE 4151-51-3
XYLENE (MIXED ISOMERS) 1330-20-7 < 2
3. Hazards Identification
Eye Hazards
Causes eye irritation.
Skin Hazards
May cause a skin irritation. Prolonged and/or repeated contact with skin may cause an allergic
reaction/sensitization, dermatitis (skin redness, dryness, scaling, etc).
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Primer 206 G + P
3. Hazards Identification - Continued
Ingestion Hazards
Harmful if swallowed.
Inhalation Hazards
Causes respiratory tract irritation. May cause an allergic respiratory reaction / sensitization after prolonged or
repeated contact. Reports have associated repeated and prolonged exposure to some of the chemicals in this
product with permanent brain, liver, kidney, and Central Nervous System damage. Headaches and dizziness
may result.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of tepid water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting. Call a physician or a poison control center immediately.
Inhalation
Remove to fresh air. If not breathing, give artificial respiration, seek medical attention.
5. Fire Fighting Measures
Flash Point: 25 掳F -4 掳C
Autoignition Point: >752 掳F >400 掳C
Lower Explosive Limit: 1.5 %
Upper Explosive Limit: 12.0 %
Fire And Explosion Hazards
Protect against electrostatic charge. Possible formation of explosive mixtures air/vapor. Vapors may flow along
surfaces to distant ignition sources and flash back.
Extinguishing Media
Foam/Dry Chemical/Water Fog/CO2
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate Personal Protective Equipment (PPE). Absorb and/or contain spill with
inert materials (e.g. sand, vermiculite) and then place in appropriate container. For large spills, use water spray to
disperse vapors. Prevent runoff from entering waterways or sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Keep containers tightly closed. Not for interanl consumption.
Handling Precautions
Keep away from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors, and static
electricity). Use only with adequate ventilation.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Primer 206 G + P
7. Handling And Storage - Continued
Storage Precautions
Keep containers closed and dry in a cool, well ventilated place. Keep away from food and beverages. Keep away
from heat, sparks, flame, and other sources of ignition (i.e., pilot lights, electric motors and static electricity).
Protect from frost and direct sunlight.
Work/Hygienic Practices
Use good personal hygiene.
8. Exposure Controls/Personal Protection
Engineering Controls
Use of a system of local and/or general exhaust is recommended to keep employee below applicable expsoure
limits. Refer to the current edition of "Industrial Ventilation: A Manual of Recommended Practice" published by
the American Conference of Governmental Industrial Hygienists for information on the design, installation, use,
and maintenance of exhaust systems.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Chemical-resistant gloves. Lab coat or other work clothing to prevent skin exposure. Launder before reuse.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Expsosure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly after handling.
Ingredient(s) - Exposure Limits
ETHYL ACETATE
ACGIH TLV-TWA 400 ppm
OSHA PEL-TWA 400 ppm
N-BUTYL ACETATE
ACGIH TLV-STEL 200 ppm
ACGIH TLV-TWA 150 ppm
OSHA PEL-TWA 150 ppm
XYLENE (MIXED ISOMERS)
OSHA PEL - TWA: 100 PPM
OSHA PEL - STEL: 150 PPM
ACGIH TLV - TWA: 100 PPM
ACGIH TLV - STEL: 150 PPM
CONTAINS 15% ETHYL BENZENE 100-41-4
E.B. OSHA PELs 100 PPM / 125 PPM
9. Physical And Chemical Properties
Appearance
Black liquid
Odor
Ester
Chemical Type: Mixture
Physical State: Liquid
Boiling Point: 171 掳F 77 掳C
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Primer 206 G + P
9. Physical And Chemical Properties - Continued
Odor - Continued
Specific Gravity: 1.05
Percent VOCs: 57.5
Packing Density: 8.8 pounds/gallons
Vapor Pressure: 97 hPa AT 20 C
Vapor Density: N/AV
Solubility: Reacts with water
Viscosity: 70 MPas
VOC Content: 604 grams/liter
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatible Materials
None Known
Hazardous Decomposition Products
No decomposition if used as prescribed.
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
RCRA Information
Waste solutions may meet the RCRA Ignitable characteristic.
14. Transport Information
Proper Shipping Name
Resin Solution, flammable
Hazard Class
3 PGII
DOT Identification Number
UN1866
DOT Shipping Label
Flammable
Note: As packaged, Sika Primer 206 Stix are regulated per 49 CFR 173.4 (Small Quantity Exception)
15. Regulatory Information
No Data Available...
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Primer 206 G + P
15. Regulatory Information - Continued
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
Fire Hazard
SARA Title III - Section 313 Supplier Notification
This product contains the following toxic chemicals that are subject to the reporting requirements of section 313 of
the Emergency Planning and Community Right-To-Know Act (EPCRA) of 1986 and of 40 CFR 372.
XYLENE (MIXED ISOMERS) (1330-20-7) <2 %
This information must be included on all MSDSs that are copied and distributed for this material.
Ingredient(s) - U.S. Regulatory Information
XYLENE (MIXED ISOMERS)
SARA Title III - Section 313 Form "R"/TRI Reportable Chemical
Ingredient(s) - State Regulations
ETHYL ACETATE
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
N-BUTYL ACETATE
New Jersey - Workplace Hazard
Pennsylvania - Workplace Hazard
16. Other Information
HMIS Rating
Health: *2
F i re : 3
Reactivity: 1
PP E: H
Revision/Preparer Information
MSDS Preparer: EHS Department
This MSDS Supercedes A Previous MSDS Dated: 08/19/2005
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
SIKA CORPORATION
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|