MATERIAL SAFETY DATA SHEET
Sika Aktivator (AGR & OEM)
HMIS
HEALTH *2
FLAMMABILITY 3
REACTIVITY 0
C
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
30800 Stephenson Highway 30800 Stephenson Highway
Madison Heights, MI 48071 U.S.A. Madison Heights, MI 48071 U.S.A.
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikaindustry.com Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 05/30/2007
Product Name: Sika Aktivator (AGR & OEM)
CAS Number: Not Established
MSDS Number: 4108
Product Code: 060H540 (Internal use only)
2. Composition/Information On Ingredients
Ingredient CAS Percent Of
Name Number Total Weight
ETHANOL 64-17-5 10 - 15
HEPTANE 142-82-5
3. Hazards Identification
Eye Hazards
Eye irritant.
Skin Hazards
May causes skin irritation. Prolonged or repeated skin contact with liquid may cause defatting resulting in drying,
redness and/or possible blistering.
Ingestion Hazards
Ingestion may cause headache, drowsiness, and unconsciousness, as well as stomach discomfort.
Inhalation Hazards
May cause respiratory tract irritation. Over exposure to vapors may cause headache, narcosis or other central
nervous system effects.
Page 1 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator (AGR & OEM)
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get
medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately flush skin with soap and plenty of water for at least 15 minutes. Get medical
attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed seek immediate medical attention. Do not induce vomiting unless directed to do so by medical
personnel.
Inhalation
Remove to fresh air. If breathing has stopped institute artificial respiration. Consult a physician.
5. Fire Fighting Measures
Flash Point: 24.8 掳F -4 掳C
Fire And Explosion Hazards
Protect against electro static charge. Explosion protection. Possible formation of explosive mixtures air/vapor.
Vapors may flow along surfaces to distant ignition sources and flash back.
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Eliminate all ignition sources. Use appropriate Personal Protective Equipment (PPE). Absorb and/or contain spill with
inert materials (e.g. sand, vermiculite) and then place in appropriate container. For large spills, use water spray to
disperse vapors. PRevent runoff from entering waterways or sewers.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Store containers tightly sealed and moisture-proof in a well ventilated area.
Observe safety measures in use for handling chemicals. Take precautionary measures against electro static
charge. Explosion Protection: possible formation of explosive mixtures air/vapor. Keep away from fire, sparks,
and other ignition sources.
Storage Precautions
Keep away from heat, sparks, flame, and other sources of ignition (i.e. pilot lights, electric motors and static
electricity).
Work/Hygienic Practices
Wash thoroughly with soap and water after handling.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation. Refer to the current edition of "Industrial Ventilation: A
Manual of Recommended Practice" published by the American Conference of Governmental Industrial Hygienists
for information on the design, installation, use, and maintenance of exhaust systems.
Page 2 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator (AGR & OEM)
8. Exposure Controls/Personal Protection - Continued
Eye/Face Protection
Safety glasses with side shields or goggles.
Skin Protection
Avoid skin contact. Wear long sleeve shirt, pants, chemical resistant gloves.
Respiratory Protection
A respirator protection program that meets 29 CFR 1910.134 requirement must be followed whenever workplace
conditions warrant a respirator's use. In areas where the Permissible Exposure Limits are exceeded, use a
properly fitted NIOSH-approved respirator.
Other/General Protection
Wash thoroughly with soap and water after handling.
Ingredient(s) - Exposure Limits
ETHANOL
ACGIH TLV-TWA 1000 ppm
OSHA PEL-TWA 1000 ppm
HEPTANE
ACGIH TLV-STEL 500 ppm
ACGIH TLV-TWA 400 ppm
OSHA PEL-TWA 500 ppm
9. Physical And Chemical Properties
Appearance
Clear to light amber liquid
Odor
Petrol like odor
Chemical Type: Mixture
Physical State: Liquid
Melting Point: N/AV 掳F
Specific Gravity: 0.71 g/cm3
Percent Volatiles: N/AV
Percent VOCs: 95
Packing Density: N/AV
Vapor Pressure: N/AV
Vapor Density: N/AV
Solubility: N/AV
VOC Content: 675 grams / liter (USEPA Method 24)
10. Stability And Reactivity
Stability: STABLE
Hazardous Polymerization: WILL NOT OCCUR
Conditions To Avoid (Stability)
Formation of explosive gas/air mixtures
Incompatible Materials
Oxidants, Amines, Water
Hazardous Decomposition Products
Combustion products include fumes, smoke, CO, CO2, nitrogen oxides
Page 3 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator (AGR & OEM)
10. Stability And Reactivity - Continued
Conditions To Avoid (Polymerization)
None known
11. Toxicological Information
Miscellaneous Toxicological Information
May cause irritation, central nervous system effects, and toxic
Conditions Aggravated By Exposure
Eye disease, skin disorders, chronic respiratory conditions
Contains ingredients which may be considered potential carcinogens by OSHA.
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Resin Solution, Flammable
Hazard Class
3, PG. II
DOT Identification Number
UN1866
DOT Shipping Label
FLAMMABLE
USDOT Note: As packaged, Sika Aktivator Pads are regulated per 49 CFR 173.4 (Small Quantity Exception)
ICAO/IATA Note: As packaged, Sika Aktivator Pads are regulated per ICAO Chapter 2 (Dangerous Goods in
Excepted Quantities)
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Hazard Classes
Acute Health Hazard
Chronic Health Hazard
Fire Hazard
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
Ingredient(s) - State Regulations
ETHANOL
Page 4 of 5
MATERIAL SAFETY DATA SHEET
Sika Aktivator (AGR & OEM)
15. Regulatory Information - Continued
Ingredient(s) - State Regulations - Continued
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
HEPTANE
New Jersey - Workplace Hazard
New Jersey - Special Hazard
Pennsylvania - Workplace Hazard
Massachusetts - Hazardous Substance
New York City - Hazardous Substance
16. Other Information
HMIS Rating
Health: *2
F i re : 3
Reactivity: 0
PP E: C
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
This MSDS Supercedes A Previous MSDS Dated: 07/12/2006
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corp.
Printed Using MSDS Generator鈩? 2000
Page 5 of 5
|