MATERIAL SAFETY DATA SHEET
Page 1 of 4
Sika Slick
HMIS
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
B
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Canada Inc.
30800 Stephenson Highway 601, Avenue Delmar
Madison Heights, MI 48071 U.S.A. Pointe Claire, QC H9R 4A9 Canada
Company Contact: EHS Department Company Contact: Steve Gosselin
Telephone Number: 201-933-8800 Telephone Number: 514-697-2610
FAX Number: 201-933-9379
Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CANUTEC: 613-996-6666
INTERNATIONAL: 703-527-3887
Issue Date: 10/29/2004
Product Name: Sika Slick
MSDS Number: 3381
2. Composition/Information On Ingredients
This product contains no hazardous ingredients when evaluated by criteria established in the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
3. Hazards Identification
Eye Hazards
May cause eye irritation.
Skin Hazards
May causes skin irritation.
Ingestion Hazards
May be harmful if swallowed.
Inhalation Hazards
May cause respiratory tract irritation.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
Skin
In case of contact, immediately wash skin with soap and plenty of tepid water for at least 15 minutes. Get
MATERIAL SAFETY DATA SHEET Page 2 of 4
Sika Slick
4. First Aid Measures - Continued
Skin - Continued
medical attention immediately if irritation (redness, rash, blistering) develops and persists.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel.
Inhalation
Treat any irritation symptomatically. Obtain medical attention if irritation develops and persists.
5. Fire Fighting Measures
Flash Point: N/A 掳F
Extinguishing Media
Foam, dry chemical, CO2, water
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Avoid release to the environment. Use appropriate Personal Protective Equipment (PPE). Contain spill and collect with
absorbent material and transfer into suitable containers. Do not flush to sewer or allow to enter waterways. Ventilate
enclosed area.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children.
Storage Precautions
Store in a cool dry place.
Work/Hygienic Practices
Wash thoroughly with soap and water after handling and before eating.
8. Exposure Controls/Personal Protection
Engineering Controls
Use with adequate general and local exhaust ventilation.
Eye/Face Protection
Faceshield over safety glasses or goggles.
Skin Protection
Gloves, long sleeve shirt, long pants to prevent contact. Heat resistant gloves when handling product at elevated
temperatures.
Respiratory Protection
None normally expected.
9. Physical And Chemical Properties
Appearance
Clear Liquid
Odor
No odor
Chemical Type: Mixture
Physical State: Liquid
MATERIAL SAFETY DATA SHEET Page 3 of 4
Sika Slick
9. Physical And Chemical Properties - Continued
Odor - Continued
Boiling Point: 212 掳F
Specific Gravity: 1.0
Percent Volatiles: >80
Vapor Pressure: 17mm at 20C
Vapor Density: <1 (water)
pH Factor: 6-8
Solubility: Soluble in water
Evaporation Rate: <1 (water)
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None Known
Incompatible Materials
None Known
Hazardous Decomposition Products
Carbon Oxides
Conditions To Avoid (Polymerization)
None Known
11. Toxicological Information
No Data Available...
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.ral, state and local government regulations.
14. Transport Information
Proper Shipping Name
Not Regulated by the US D.O.T.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
16. Other Information
HMIS Rating
H eal th: 1
F i re : 1
Reactivity: 0
PP E: B
MATERIAL SAFETY DATA SHEET Page 4 of 4
Sika Slick
16. Other Information - Continued
HMIS Rating - Continued
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201-933-8800
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other materialor in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
|