MATERIAL SAFETY DATA SHEET
Page 1 of 4
SikaLastomer 庐 46
HMIS
HEALTH 1
FLAMMABILITY 1
REACTIVITY 0
B
PERSONAL PROTECTION
1. Product And Company Identification
Supplier Manufacturer
Sika Corporation Sika Corporation
30800 Stephenson Highway 30800 Stephenson Highway
Madison Heights, MI 48071 U.S.A. Madison Heights, MI 48071 U.S.A.
Company Contact: EHS Department Company Contact: EHS Department
Telephone Number: 201-933-8800 Telephone Number: 201-933-8800
FAX Number: 201-933-9379 FAX Number: 201-933-9379
Web Site: www.sikaindustry.com Web Site: www.sikaindustry.com
Supplier Emergency Contacts & Phone Number Manufacturer Emergency Contacts & Phone Number
CHEMTREC: 800-424-9300 CHEMTREC: 800-424-9300
INTERNATIONAL: 703-527-3887 INTERNATIONAL: 703-527-3887
Issue Date: 06/08/2004
Product Name: SikaLastomer 庐 46
Chemical Family: Butyl mastic sealer
MSDS Number: 3198
2. Composition/Information On Ingredients
This products contains no hazardous ingredients when evaluated by criteria established in the OSHA Hazard
Communication Standard (29 CFR 1910.1200).
3. Hazards Identification
Eye Hazards
Eye contact unlikely in normal use but material may act as a mechanical irritant.
Skin Hazards
None expected when handling product at room temperature.
Ingestion Hazards
Not normally ingested in industrial use. If ingested may irritate gastrointestinal system.
Inhalation Hazards
No inhalation hazards are expected under normal use.
4. First Aid Measures
Eye
In case of contact, hold eyelids apart and immediately flush eyes with plenty of tepid water for at least 15 minutes.
Get medical attention immediately if irritation develops and persists.
MATERIAL SAFETY DATA SHEET Page 2 of 4
SikaLastomer 庐 46
4. First Aid Measures - Continued
Skin
None expected. In accordance with good hygienic practice, wash with soap and water after use.
Ingestion
If swallowed, do not induce vomiting unless directed to do so by medical personnel. Seek medical attention
immediately.
Inhalation
Treat any irritation symptomatically. Obtain medical attention if irritation develops and persists.
5. Fire Fighting Measures
Flash Point: 470 掳F 243 掳C
Lower Explosive Limit: N/AP
Upper Explosive Limit: N/AP
Fire And Explosion Hazards
None known
Extinguishing Media
In case of fire, use water spray (fog) foam, dry chemical, or CO2.
Fire Fighting Instructions
In the event of a fire, firefighters should wear full protective clothing and NIOSH-approved self-contained
breathing apparatus with a full facepiece operated in the pressure demand or other positive pressure mode.
6. Accidental Release Measures
Pick up product as a solid. Use appropriate personal protective equipment (PPE). If not reused or recycled, dispose of
in accordance with Section 13 of this MSDS.
7. Handling And Storage
Handling And Storage Precautions
Keep out of reach of children. Wash thoroughly with soap and water after handling. Use good personal hygiene.
8. Exposure Controls/Personal Protection
Eye/Face Protection
Safety glasses with side shields or goggles recommended.
Skin Protection
Gloves, lab coat and/or other work clothing to minimize skin exposure.
Respiratory Protection
None normally expected.
9. Physical And Chemical Properties
Appearance
Light gray mastic.
Odor
Slight odor
Chemical Type: Mixture
Physical State: Solid
Specific Gravity: 1.68 +/- 0.05
Solubility: Insoluble in water
MATERIAL SAFETY DATA SHEET Page 3 of 4
SikaLastomer 庐 46
10. Stability And Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Conditions To Avoid (Stability)
None known
Incompatible Materials
Strong Oxidizers
Hazardous Decomposition Products
Carbon Dioxide, Carbon Monoxide, and Hydrocarbons upon combustion.
Conditions To Avoid (Polymerization)
None known
11. Toxicological Information
Miscellaneous Toxicological Information
None known
Conditions Aggravated By Exposure
None known
12. Ecological Information
No Data Available...
13. Disposal Considerations
Dispose in accordance with applicable federal, state and local government regulations. Waste generators must
determine whether a discarded material is classified as a hazardous waste. USEPA guidelines for the classification
determination are listed in 40 CFR Parts 261.3. Additionally, waste generators must consult state and local hazardous
waste regulations to ensure complete and accurate classification.
14. Transport Information
Proper Shipping Name
Not regulated by the USDOT.
15. Regulatory Information
U.S. Regulatory Information
All ingredients of this product are listed or are excluded from listing under the U.S. Toxic Substances Control Act
(TSCA) Chemical Substance Inventory.
SARA Section 313 Notification
This product does not contain any ingredients regulated under Section 313 of the Emergency Planning and
Community Right-To-Know Act of 1986 or 40 CFR 372.
16. Other Information
HMIS Rating
H eal th: 1
F i re : 1
Reactivity: 0
Personal Protection: B
Revision/Preparer Information
MSDS Preparer: EHS Department
MSDS Preparer Phone Number: 201 -933-8800
This MSDS Supercedes A Previous MSDS Dated: 10/24/2003
MATERIAL SAFETY DATA SHEET Page 4 of 4
SikaLastomer 庐 46
Disclaimer
The data in this Material Safety Data Sheet relates only to the specific material herein and does not relate to use
in combination with any other material or in any process. The information set forth herein is based on technical
data that Sika believes to be reliable as of the date hereof. Since conditions of use are outside our control, we
make no warranties, express or implied and assume no liability in connection with any use of this information.
Nothing herein is to be taken as a license to operate under or a recommendation to infringe any patents.
Sika Corporation
Printed Using MSDS Generator鈩? 2000
|