06142002 MATERIAL SAFETY DATA SHEET : 00000195 PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140
PRODUCT : LEPAGE FLEXIBLE PLASTIC ADHESIVE
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............B2. D2A
T.D.G. CLASSIFICATION............ADHESIVES. CLASS 3, UN 1133, PKG GRP II. WHEN THIS PRODUCT IS LABELLED AS
A CONSUMER COMMODITY IT IS EXEMPT FROM T.D.G. REGULATIONS (SEE SECTION
2.7(1) OF TRANSPORTATION OF DANGEROUS GOODS REGULATIONS).
PRODUCT NAME.....................LEPAGE FLEXIBLE PLASTIC ADHESIVE
CHEMICAL FAMILY..................SYNTHETIC POLYMER. ORGANIC SOLVENT BLEND
MATERIAL USE.....................ADHESIVE
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
2-Butanone 60-100 PEL-TWA: 200 ppm 78-93-3 2.7g/kg,oral,rat 23.5g/m3/8hr.,
4.0g/kg,oral,mouse rat
6.5g/kg,skin,rabbit
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Liquid
APPEARANCE & ODOUR...............Colourless. Typical ketone hydrocarbon odour
ODOUR THRESHOLD (ppm)............5-10 ppm
VAPOUR PRESSURE (mm Hg)..........77.5 (20 deg C)
VAPOUR DENSITY (AIR=1)...........2.5
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................5.7 (Butyl acetate)
BOILING POINT (deg C)............80 deg C
FREEZING POINT (deg C)...........Not available
pH...............................Not applicable
SPECIFIC GRAVITY.................0.86
SOLUBILITY IN WATER (% W/W)......Miscible
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................Yes. FLAMMABLE LIQUID
IF YES, UNDER WHICH..............Excessive heat, sparks and open flame. Vapours may cause flash fires.
CONDITIONS? Vapours may ignite explosively. Vapours are heavier than air and may
travel a considerable distance to a source of ignition and flash back.
AUTO IGNITION TEMPERATURE........Not available
EXTINGUISHING MEDIA..............Foam, "Alcohol" Foam, CO2, Dry Chemical, Water Fog.
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes. Use water-spray
to keep containers cool
SENSITIVITY TO STATIC............Yes. Take precautionary measures against static discharges.
DISCHARGE
SENSITIVITY TO IMPACT......No
FLASH POINT (C), METHOD..........-9 deg C (TCT)
LOWER FLAMMABLE LIMIT (% VOL)....2.0
UPPER FLAMMABLE LIMIT (% VOL)....11.0
HAZARDOUS COMBUSTION PRODUCTS....Thermal decomposition could produce carbon monoxide, carbon dioxide, and
unidentified organic compounds.
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Under normal conditions
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?............Strong acids. Strong alkalies (i.e. Sodium Hydroxide and alkali metals).
Strong oxidizing agents
REACTIVITY CONDITIONS ?
06142002 MATERIAL SAFETY DATA SHEET : 00000195 PAGE:2
PRODUCT : LEPAGE FLEXIBLE PLASTIC ADHESIVE
SECTION 05: REACTIVITY DATA
HAZARDOUS PRODUCTS OF............Oxides of carbon (CO,CO2) at high temperatures.
DECOMPOSITION
SECTION 06: TOXICOLOGICAL PROPERTIES
SKIN CONTACT...............May cause irritation, especially on prolonged contact.
SKIN ABSORPTION............May be absorbed by the skin.
EYE CONTACT................Irritating, and may injure eye tissue if not removed promptly
INHALATION.................High vapour concentrations are irritating to the eyes and the respiratory
tract.
INGESTION..................Moderately toxic.
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......May aggravate existing eye, skin, and lung conditions.
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........Refer to route of entry
MATERIAL
CARCINOGENICITY OF MATERIAL......Not indicated
REPRODUCTIVE EFFECTS.............Exposure and/or contact with this chemical may cause reproductive effects.
MUTAGENICITY OF MATERIAL.........Not indicated
TERATOGENICITY OF MATERIAL.......Exposure by inhalation to an ingredient in this product has been shown to
cause fetotoxic effects in laboratory animals
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Gloves are not normally required for foreseeable conditions of use.
RESPIRATORY/TYPE...........None required under normal use. Use a NIOSH/MSHA approved respirator
whenever mist or spray is generated.
EYE/TYPE...................Safety glasses are optional.
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate local exhaust ventilation.
LEAK/SPILL.......................Eliminate all sources of ignition. Wear a breathing apparatus. Clean up
spills immediately. Absorb residual material with sand, or other absorbent
material. Flush area with plenty of water. Collect waste in sealed
containers.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations. Since
emptied container retains product residues all labelled hazard precautions
must be observed.
HANDLING PROCEDURES AND..........Use adequate ventilation. Avoid smoking, drinking or eating in use. TREAT
EQUIPMENT AS FLAMMABLE MATERIAL; KEEP AWAY FROM HEAT, SPARKS AND OPEN FLAMES. Avoid
skin and eye contact. Wash thoroughly after handling.
STORAGE NEEDS....................Store in a cool, dry place away from direct heat.
SPECIAL SHIPPING INSTRUCTIONS....Ship in accordance with applicable Transportation of Dangerous Goods (TDG)
regulations. Protect against physical damage.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush eyes with large amounts of water until irritation
subsides. Seek medical attention immediately.
INGESTION........................Dilute with large quantities of water or milk. DO NOT induce vomiting. Get
immediate medical attention. Never give anything by mouth to an
unconscious person.
INHALATION.......................Remove to fresh air. If breathing is difficult, give oxygen. If breathing
has stopped, give artificial respiration. Get medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................JUN 13/2002
06142002 MATERIAL SAFETY DATA SHEET : 00000195 PAGE:3
PRODUCT : LEPAGE FLEXIBLE PLASTIC ADHESIVE
SECTION 09: PREPARATION INFORMATION
CANUTEC EMERGENCY (613) 996-6666
|