06142002 MATERIAL SAFETY DATA SHEET : 00000178 PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140
PRODUCT : LEPAGE INSTANT POLYFILLA
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............B2. D2A. D2B. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS
EXEMPT FROM WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS
PRODUCTS ACT.)
T.D.G. CLASSIFICATION............FLAMMABLE LIQUIDS, N.O.S. (ISOPROPYL ALCOHOL). CLASS 3, UN 1993, PKG GP
II. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER COMMODITY IT IS EXEMPT
FROM T.D.G. REGULATIONS (SEE SECTION 2.7(1) OF TRANSPORTATION OF DANGEROUS
GOODS REGULATIONS).
PRODUCT NAME.....................LEPAGE INSTANT POLYFILLA
CHEMICAL FAMILY..................RESIN SOLUTION
MATERIAL USE.....................FILLING COMPOUND
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Isopropyl alcohol 10-30 TLV: 400 ppm TWA 67-63-0 5.045g/kg,oral,rat 12.8ppm/3 hrs.
PEL: 400 ppm TWA 12.8g/kg,skin, inhalation
rabbit
Crystalline silica 0.5-1.5 0.1 mg/m3 (dust) 14808-60-7 Not available Not available
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Paste
APPEARANCE & ODOUR...............Off-white paste. Smooth paste
ODOUR THRESHOLD (ppm)............<400 ppm
VAPOUR PRESSURE (mm Hg)..........33. @ 20 deg C
VAPOUR DENSITY (AIR=1)...........2.1
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................1.4. (Butyl Acetate = 1)
BOILING POINT (deg C)............83 C
FREEZING POINT (deg C)...........Not available
pH...............................7.0
SPECIFIC GRAVITY.................1.600
SOLUBILITY IN WATER (% W/W)......Miscible
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................Yes
IF YES, UNDER WHICH..............Excessive heat, sparks and open flame
CONDITIONS?
EXTINGUISHING MEDIA..............Water fog. Foam. CO2. Dry chemical
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes.
FLASH POINT (C), METHOD..........23.5 C, PMCC
AUTO IGNITION TEMPERATURE........460 C
UPPER FLAMMABLE LIMIT (% VOL)....12.0
LOWER FLAMMABLE LIMIT (% VOL)....2.0
HAZARDOUS COMBUSTION PRODUCTS....This product does not undergo spontaneous decomposition. Typical
combustion products are carbon dioxide, carbon monoxide, and smoke.
EXPLOSION DATA
SENSITIVITY TO STATIC............Yes. Take precautionary measures against static discharges.
DISCHARGE
SENSITIVITY TO IMPACT......No
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Stable under normal temperature and pressure.
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?............Direct heat. Strong oxidizing agents
06142002 MATERIAL SAFETY DATA SHEET : 00000178 PAGE:2
PRODUCT : LEPAGE INSTANT POLYFILLA
SECTION 05: REACTIVITY DATA
REACTIVITY CONDITIONS ?..........Product is stable; hazardous polymerization will not occur.
HAZARDOUS PRODUCTS OF............Oxides of carbon (CO,CO2) at high temperatures.
DECOMPOSITION
SECTION 06: TOXICOLOGICAL PROPERTIES
ROUTE OF ENTRY:
SKIN CONTACT...............Frequent or prolonged contact may irritate and cause dermatitis.
SKIN ABSORPTION............May be absorbed by the skin.
EYE CONTACT................Irritating, but does not injure eye tissue.
INHALATION.................High vapour concentrations are irritating to the eyes and the respiratory
tract. May cause headaches and dizziness; are anaesthetic. May affect
central nervous system.
INGESTION..................Ingestion effects have not been evaluated but are assumed to cause nausea
and vomiting.
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......May aggravate existing skin and eye conditions. May aggravate existing
nervous system conditions. This product contains crystalline silica.
Prolonged exposure to respirable crystalline quartz may cause delayed
(chronic) lung injury (silicosis).
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......See hazardous ingredients section (2)
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........None known
MATERIAL
CARCINOGENICITY OF MATERIAL......Crystalline silica is an IARC-listed known lung carcinogen.
REPRODUCTIVE EFFECTS.............Not available
MUTAGENICITY OF MATERIAL.........Not available
SYNERGISTIC MATERIALS............Not applicable
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Gloves are not normally required for foreseeable conditions of use. During
prolonged contact impervious gloves should be worn.
RESPIRATORY/TYPE...........None required under normal use. Avoid prolonged or repeated breathing of
vapour or mists. Use approved respirator for dusts and mists when sanding,
grinding or machining cured compound.
EYE/TYPE...................Safety glasses are optional.
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate general ventilation.
LEAK/SPILL.......................Pick up. Clean with water. Put in appropriate labelled container for
disposal.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Avoid breathing vapours. Avoid eating and drinking in use. Keep container
EQUIPMENT closed. Protect against physical damage.
STORAGE NEEDS....................Avoid static electricity - ground containers when transferring product.
Keep away from heat, sparks, and open flames. Keep from freezing. Keep
container closed to avoid evaporation loss. Store in a cool and dry place,
for product integrity.
SPECIAL SHIPPING INSTRUCTIONS....Ship in accordance with applicable Transportation of Dangerous Goods (TDG)
regulations.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush eyes with large amounts of water until irritation
subsides. If irritation persists, get medical attention.
INGESTION........................If swallowed, induce vomiting only if victim is alert. Get immediate
medical attention. DO NOT attempt to give anything by mouth to a drowsy or
unconscious person.
INHALATION.......................Remove to fresh air. If symptoms develop, seek medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
06142002 MATERIAL SAFETY DATA SHEET : 00000178 PAGE:3
PRODUCT : LEPAGE INSTANT POLYFILLA
SECTION 09: PREPARATION INFORMATION
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................JUN 13/2002
CANUTEC EMERGENCY (613) 996-6666
|