06172002 MATERIAL SAFETY DATA SHEET : 00000022 PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140
PRODUCT : LEPAGE PLASTIC MODEL CEMENT
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............B2. D2B. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS EXEMPT
FROM WHMIS REGULATIONS. (SEE SECTION 12(f) OF THE HAZARDOUS PRODUCTS ACT).
T.D.G. CLASSIFICATION............ADHESIVES, CLASS 3, UN 1133, PKG GRP II. WHEN THIS PRODUCT IS LABELLED AS
A CONSUMER COMMODITY IT IS EXEMPT FROM T.D.G. REGULATIONS (SEE SECTION
2.7(1) OF TRANSPORTATION OF DANGEROUS GOODS REGULATIONS).
PRODUCT NAME.....................LEPAGE PLASTIC MODEL CEMENT
CHEMICAL FAMILY..................SYNTHETIC POLYMER. ORGANIC SOLVENT BLEND
MATERIAL USE.....................MODEL CEMENT FOR PLASTIC
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Toluene 60-100 TLV-TWA:188mg/m3 108-88-3 2.6-7.5g/kg,oral,rat 8800 ppm,4hr,rat
PEL-TWA:375mg/m3 14.1ml/kg,skin,rbt
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Liquid
APPEARANCE & ODOUR...............Clear, viscous liquid. Aromatic odour
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........Not available
VAPOUR DENSITY (AIR=1)...........3.17
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................2.1 (butyl acetate =1)
MELTING POINT (deg C)............Not Applicable
BOILING POINT (deg C)............111 deg C
pH...............................Not applicable
SPECIFIC GRAVITY.................0.91
SOLUBILITY IN WATER (% W/W)......Insoluble
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY.....................FLAMMABLE LIQUID
IF YES, UNDER WHICH..............Excessive heat, sparks and open flame
CONDITIONS?
AUTO IGNITION TEMPERATURE........573 deg C
EXTINGUISHING MEDIA..............Water fog; Foam; CO2; Dry chemical
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes. Use water-spray
to keep containers cool
FLASH POINT (C), METHOD..........6 deg C,PMC
LOWER FLAMMABLE LIMIT (% VOL)....1.2
UPPER FLAMMABLE LIMIT (% VOL)....7.1
HAZARDOUS COMBUSTION PRODUCTS....This product does not undergo spontaneous decomposition. Typical
combustion products are carbon dioxide, carbon monoxide, and smoke.
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Stable under normal temperature and pressure.
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?............Strong alkalies (i.e. Sodium Hydroxide and alkali metals) and oxidizers.
REACTIVITY CONDITIONS ?
HAZARDOUS PRODUCTS OF............Smoke. Oxides of carbon (CO,CO2) at high temperatures.
DECOMPOSITION
06172002 MATERIAL SAFETY DATA SHEET : 00000022 PAGE:2
PRODUCT : LEPAGE PLASTIC MODEL CEMENT
SECTION 06: TOXICOLOGICAL PROPERTIES
SKIN CONTACT...............Frequent or prolonged contact may irritate and cause dermatitis.
SKIN ABSORPTION............May be absorbed by the skin.
EYE CONTACT................Irritating, and may injure eye tissue if not removed promptly
INHALATION.................Considered toxic by this route. High vapour concentrations are irritating
to the eyes and the respiratory tract. May cause headaches and dizziness;
are anaesthetic. May affect central nervous system.
INGESTION..................Low toxicity
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......May aggravate existing blood and heart conditions. May aggravate existing
eye, skin, and lung conditions. May aggravate existing nervous system,
kidney, and liver conditions. Central nervous system depression.
Dermatitis. Kidney damage. Liver damage.
LD 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2)
ROUTE
LC 50 OF MATERIAL, SPECIES &.....See hazardous ingredients section (2).
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........May cause allergic skin reaction, especially on prolonged or repeated
MATERIAL contact.
CARCINOGENICITY OF MATERIAL......No
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Wear impervious gloves (in neoprene or rubber).
RESPIRATORY/TYPE...........None required under normal use. Use a NIOSH/MSHA approved respirator
whenever mist or spray is generated.
EYE/TYPE...................Safety glasses, goggles or face shield to protect against splashing.
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate local exhaust ventilation.
LEAK/SPILL.......................Clean up spills immediately. Put in appropriate labelled container for
disposal.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations. Since
emptied container retains product residues all labelled hazard precautions
must be observed.
HANDLING PROCEDURES AND..........Use adequate ventilation. Wear chemical splash goggles, gloves, and
EQUIPMENT protective clothing. Avoid skin and eye contact. Wash thoroughly after
handling.
STORAGE NEEDS....................Keep away from heat, sparks, and open flames. Store in a cool, dry place
away from direct heat.
SPECIAL SHIPPING INSTRUCTIONS....Ship in accordance with applicable Transportation of Dangerous Goods (TDG)
regulations. Protect against physical damage.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush eyes with large amounts of water until irritation
subsides. If irritation persists, get medical attention.
INGESTION........................If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt medical
attention.
INHALATION.......................Remove to fresh air. If breathing is difficult, give oxygen. If breathing
has stopped, give artificial respiration. Get medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................JUN 17/2002
CANUTEC EMERGENCY (613) 996-6666
|