06172002 MATERIAL SAFETY DATA SHEET : 00000540 PAGE:1
HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO CANADA L6T 2J4
(905) 459-1140
PRODUCT : LEPAGE PFX 523 WOOD FILLER - ALL COLOURS
SECTION 01: PRODUCT INFORMATION
MANUFACTURER.....................HENKEL CONSUMER ADHESIVES
50 WEST DRIVE
BRAMPTON, ONTARIO
CANADA ; L6T 2J4
(905) 459-1140
AFTER HOURS - CANUTEC (613) 996-6666
WHMIS CLASSIFICATION.............D2A. WHEN THIS PRODUCT IS LABELLED AS A CONSUMER PRODUCT IT IS EXEMPT FROM
WHMIS REGULATIONS (SEE SECTION 12(f) OF THE HAZARDOUS PRODUCT ACT)
T.D.G. CLASSIFICATION............NOT REGULATED
PRODUCT NAME.....................LEPAGE PFX 523 WOOD FILLER - ALL COLOURS
CHEMICAL FAMILY..................VINYL ACETATE HOMOPOLYMER
MATERIAL USE.....................FINE SURFACE FILLER
SECTION 02: HAZARDOUS INGREDIENTS
HAZARDOUS INGREDIENTS % EXPOSURE LEVELS C.A.S. # LD/50, ROUTE, SPECIES LC/50, ROUTE, SPECIES
Crystalline silica 0.5-1.5 0.1 mg/m3 (dust) 14808-60-7 Not available Not available
SECTION 03: PHYSICAL DATA
PHYSICAL STATE...................Paste
APPEARANCE & ODOUR...............Coloured
ODOUR THRESHOLD (ppm)............Not available
VAPOUR PRESSURE (mm Hg)..........17 mm Hg @ 20 deg C
VAPOUR DENSITY (AIR=1)...........0.62
BY VOLUME
BY WEIGHT
EVAPORATION RATE.................1 (water)
BOILING POINT (deg C)............100 deg C
pH...............................8.0
SPECIFIC GRAVITY.................1.55
SOLUBILITY IN WATER (% W/W)......Slightly Soluble
COEFFICIENT OF WATER/OIL.........Not available
DISTRIBUTION
SECTION 04: FIRE & EXPLOSION DATA
FLAMMABILITY
IF YES, UNDER WHICH..............Not applicable
CONDITIONS?
AUTO IGNITION TEMPERATURE........Not available
EXTINGUISHING MEDIA..............Water fog; Foam; CO2; Dry chemical
SPECIAL PROCEDURES...............Fire fighters should be equipped with self-contained breathing apparatus
to protect against potentially toxic and irritating fumes.
FLASH POINT (C), METHOD..........Not applicable
LOWER FLAMMABLE LIMIT (% VOL)....Not applicable
UPPER FLAMMABLE LIMIT (% VOL)....Not applicable
HAZARDOUS COMBUSTION PRODUCTS....Oxides of carbon (CO,CO2). Acetic acid
SECTION 05: REACTIVITY DATA
CHEMICAL STABILITY:
YES........................Stable under normal temperature and pressure.
NO, WHICH CONDITIONS ?
COMPATIBILITY WITH OTHER
SUBSTANCES:
YES
NO, WHICH ONES?............Strong oxidizing agents
REACTIVITY CONDITIONS ?
HAZARDOUS PRODUCTS OF............Oxides of carbon (CO,CO2) at high temperatures.
DECOMPOSITION
SECTION 06: TOXICOLOGICAL PROPERTIES
SKIN CONTACT...............May be a sensitizer. May cause irritation, especially on prolonged contact.
SKIN ABSORPTION............No data
EYE CONTACT................Slightly irritating but does not cause eye tissue damage.
INHALATION.................Not considered a hazard under normal conditions of use. The dust of this
product constitutes a potential inhalation hazard. May cause delayed lung
damage.
06172002 MATERIAL SAFETY DATA SHEET : 00000540 PAGE:2
PRODUCT : LEPAGE PFX 523 WOOD FILLER - ALL COLOURS
SECTION 06: TOXICOLOGICAL PROPERTIES
INGESTION..................Considered practically non-toxic.
EFFECTS OF ACUTE EXPOSURE........Refer to route of entry.
EFFECTS OF CHRONIC EXPOSURE......This product contains crystalline silica. Prolonged exposure to respirable
crystalline quartz may cause delayed (chronic) lung injury (silicosis).
LD 50 OF MATERIAL, SPECIES &.....Not available
ROUTE
LC 50 OF MATERIAL, SPECIES &.....Not available
ROUTE
EXPOSURE LIMIT OF MATERIAL.......Not available
IRRITANCY OF MATERIAL............Refer to route of entry
SENSITIZING CAPABILITY OF........None known
MATERIAL
CARCINOGENICITY OF MATERIAL......Crystalline silica is an IARC-listed known lung carcinogen.
MUTAGENICITY OF MATERIAL.........None known
REPRODUCTIVE EFFECTS.............None known
TERATOGENICITY OF MATERIAL.......None known
SYNERGISTIC MATERIALS............Not available
SECTION 07: PREVENTATIVE MEASURES
GLOVES/ TYPE...............Gloves are not normally required for foreseeable conditions of use.
RESPIRATORY/TYPE...........None required under normal use. Use approved respirator for dusts and
mists when sanding, grinding or machining cured compound.
EYE/TYPE...................Safety glasses are optional.
FOOTWEAR/TYPE..............Standard work shoes.
CLOTHING/TYPE..............Standard work clothes.
VENTILATION REQUIREMENTS.........Use adequate general ventilation.
LEAK/SPILL.......................Put in appropriate labelled container for disposal.
WASTE DISPOSAL...................In accordance with municipal, provincial and federal regulations.
HANDLING PROCEDURES AND..........Use adequate ventilation. Avoid breathing vapours. Avoid skin and eye
EQUIPMENT contact. Wear chemical splash goggles, gloves, and protective clothing.
Wash thoroughly after handling.
STORAGE NEEDS....................Store in a cool and dry place, for product integrity.
SPECIAL SHIPPING INSTRUCTIONS....Not regulated. Protect against physical damage.
SECTION 08: FIRST AID MEASURES
EYE CONTACT......................Immediately flush eyes with large amounts of water until irritation
subsides. If irritation persists, get medical attention.
INGESTION........................Have conscious patient drink several glasses of water, then induce
vomiting by having patient tickle back of throat with finger. Keep airway
clear. Seek medical attention. Never give anything by mouth to an
unconscious person.
INHALATION.......................Remove to fresh air. If symptoms develop, seek medical attention.
SKIN CONTACT.....................Remove contaminated clothing. Wash affected area with water and soap. Seek
medical attention if irritation occurs or persists.
SECTION 09: PREPARATION INFORMATION
PREPARED BY:.....................Regulatory Affairs
TELEPHONE NUMBER:................(905) 459-1140
DISCLAIMER2:.....................All information, recommendations, and suggestions appearing herein
concerning our product are based upon tests and data believed to be
reliable. However, it is the user's responsibility to determine the
safety, toxicity, and suitability for his own use of the product described
herein. Since the actual use by others is beyond our control, no
guarantee, express or implied, is made by Henkel Consumer Adhesives as to
the effects of such use, the results obtained, or the safety and toxicity
of the product nor does Henkel Consumer Adhesives assume any liability
arising out of use, by others, of the product referred to herein. The
information herein is not to be construed as absolutely complete since
additional information may be necessary or desirable when particular or
exceptional conditions or circumstan ces exist or because of applicable
laws or government regulations.
PREPARATION DATE.................JUN 17/2002
CANUTEC EMERGENCY (613) 996-6666
|