Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

010-00-7
195-00-7
025-00-1

File Name: mcmc-uk_com---msds-diluent-pu-n4-summer.asp
SICOMIN

SAFETY DATA SHEET
1 - IDENTIFICATION OF PREPARATION AND COMPANY/BUSINESS
Preparation:
Name: DILUANT PU N掳4.
Product code: 51706000 X Version: July 2001

Company/business:
Registered company name: SICOMIN Composites
RN 568 BP 23 Ch芒teauneuf-les-Martigues cedex 鈥? France
T茅l: 33.(0)4.42.42.30.20 Fax: 33.(0)4.42.81.29.29 e-mail: composites@sicomin.com
Emergency telephone No.: ++33 1 45 42 59 59 .
Association/Organisation: ORFILA.

2 - INFORMATION REGARDING CONSTITUENTS
Hazardous substances present on their own.
(present in the preparation at a sufficient concentration to give it the toxicological characteristics it would have in a
100% pure state)
606-010-00-7 Cas 108-94-1 CYCLOHEXANONE Concentration >=25.00% and <50.00%. Symbol: Xn R: 10-20

Other substances representing a hazard:
607-195-00-7 Cas 108-65-6 2-METHOXY-1-METHYLETHYL ACETATE Concentration >=10.00% and <25.00%.
Symbol: Xi R: 10-36

Substances present at a concentration below the minimum danger threshold.
No known substance in this category present.

Other substances with occupational exposure limits.
607-025-00-1 Cas 123-86-4 BUTYLACETATE N- Concentration >=25.00% and <50.00%. Symbol: R: 10

3 - IDENTIFICATION OF HAZARDS
This product is classed: Flammable.
Possibility of irritation to the eyes.
Possibility of acute, lethal, noxious effects with symptoms of slight poisoning by inhalation.

4 - FIRST AID.
As a general rule, in case of doubt or if symptoms persist, always call a doctor.
NEVER induce swallowing in an unconscious person.

In the event of exposure by inhalation.
In the event of inhalation, move the patient into the fresh air and keep him/her warm and still.
If breathing is irregular or has stopped, effect mouth-to-mouth resuscitation and call a doctor.
Do not give the patient anything orally.

In the event of splashes or contact with eyes.
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.
Regardless of the initial state, refer the patient to an ophthalmologist and show him the label.

In the event of splashes or contact with skin.
Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner.
DO NOT use solvents or thinners.

In the event of swallowing.
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult
a doctor.
SICOMIN
Keep still. DO NOT induce vomiting.
Call a doctor immediately and show him the label.

5 - FIRE-FIGHTING MEASURES
Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.

In the event of fire, the recommended extinguishing agents are:
Special foams for polar liquids (known as alcohol resistant), powders, carbon dioxide.


In the event of fire, use specifically suitable extinguishing agents. Never use water.

Extinguishing agents not to be used
Water is not generally recommended since it can be ineffective; however, it can be used successfully to cool
containers exposed to the fire and to disperse fumes.
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.
Do not breathe in smoke.
Prevent the effluent of fire-fighting measures from entering drains or waterways.

Special equipment for fire-fighting personnel.
Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.
Due to the toxicity of the gas emitted on thermal decomposition of the products, fire-fighting personnel are to be
equipped with autonomous insulating breathing apparatus.

6 - MEASURES TO BE TAKEN IN THE EVENT OF ACCIDENTAL SPILLAGE
Safety precautions:
Eliminate any possible source of ignition and ventilate the premises.
Avoid inhaling the fumes.
Avoid any contact with the skin and eyes.
Consult the safety measures listed under headings 7 and 8.

Environmental safety precautions:
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatom
earth in drums for waste disposal.
Prevent any material from entering drains or waterways.
Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory
procedures

Cleaning methods:
Clean preferably with a detergent, do not use solvents.

7 - HANDLING AND STORAGE
The regulations relating to storage premises apply to workshops where the product is handled.

Handling:
Handle in well-ventilated areas.
The fumes are denser than air. They can spread along the ground and form explosive mixtures with air
Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the
occupational exposure limits.

Fire prevention:
Prevent the accumulation of electrostatic charges with connections to earth
The preparation may become electrostatically charged; always place on the ground during transfer. Wear antistatic
shoes and clothes and make floors of conductive materials.
Use the product in premises where there are no naked flames or other sources of ignition and have protected electrical
equipment
Keep packages tightly closed and away from sources of heat, sparks and naked flames.
Do not use tools which may produce sparks. Do not smoke.
SICOMIN
Prevent access by unauthorized personnel.

Recommended equipment and procedures
Observe precautions stated on label and also industrial safety regulations
Packages which have been opened must be reclosed carefully and stored in an upright position
Avoid inhaling fumes.
Where the personnel must carry out work in a booth, whether for spraying or otherwise, the ventilation may be
inadequate to control particles and solvent fumes in every case.
It is therefore recommended that personnel wear masks with a compressed air supply during spraying operations until
the concentration of particles and solvent fumes has fallen below the exposure limits.
Avoid contact of product with the eyes

Prohibited equipment and procedures.
Smoking, eating and drinking are prohibited in premises where the preparation is used
Never open the packages under pressure




Storage.
Keep the container tightly closed in a dry place.
Keep away from all sources of ignition - do not smoke.
Keep well away from all sources of ignition, heat and direct sunlight
The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, the liquid
cannot spread beyond this area.

8 - EXPOSURE CONTROL - PERSONAL SAFETY
Technical measures.
Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.
If this ventilation is insufficient to maintain the concentration of solvent fumes below the exposure limits, wear breathing
apparatus

Exposure limits per INRS ND 1945-153-93/(1996) and ND 2022-163-96:
France VME- ppm: VME-mg/m3: VLE- ppm: VLE-mg/m3: Notes: TMP N掳:
606-010-00-7 25 100 - - - 84
607-025-00-1 150 710 200 940 - 84
607-195-00-7 - - - - - -
Germany Class: MAK-ppm: MAK-mg/m3: Notes: Notes:
606-010-00-7 - - - B*
607-025-00-1 I 200 950 -
607-195-00-7 I 50 275 -
ACGIH(TLV) TWA-ppm: TWA-mg/m3: STEL-ppm: STEL-mg/m3: Notes: Notes:
606-010-00-7 25 100 - - *
607-025-00-1 (150) (713) (200) (950) -
607-195-00-7 - - - - -

Safety breathing apparatus:
With this preparation, avoid in particular any inhalation of fumes.

Hand protection.
Protective creams may be used for exposed skin, but they should not be applied after contact with the product.
Due to the solvents present, it is recommended that polyvinyl alcohol or neoprene rubber gloves be worn.

Eye and face protection.
Avoid contact with eyes.
Wear safety goggles.
Provide eye washes in workshops where the product is constantly handled
SICOMIN
Skin protection.
For further information, see 搂 11 of S.D.S. - Toxicological information.

9 - PHYSICAL PROPERTIES
Density: <1
Acid/base character of preparation: not relevant.
Solubility of preparation in water: Insoluble.
Vapour tension at 50掳C of volatile constituents: Below 110Kpa (1.10 bar).
Physical state: fluid liquid
Flash point interval: 21掳C. < Flash point: <= 55掳C.
The pH is impossible to measure or its value is not relevant.
Self-ignition temperature: 400 掳C.
Decomposition temperature: not relevant.
Melting temperature interval: -75 掳C.
Average distillation temperature of solvents contained: 128 掳C.

10 - STABILITY AND REACTIVITY
When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon
monoxide and dioxide, smoke and nitrogen oxide

11 - TOXICOLOGICAL INFORMATION
No data is available regarding the preparation itself.



Exposure to fumes from solvents contained in the preparation beyond the exposure limits stated may produce effects
harmful to health, such as:
Irritation of mucous membrane and respiratory system, kidneys, liver and central nervous system.
Symptoms produced will include headaches, numbness, dizziness, fatigue, muscular asthenia and, in extreme cases,
loss of consciousness.
Prolonged or repeated contact with the preparation may strip the skin of its natural oil and thus cause non-allergic
dermatitis on contact and absorption through the epidermis.
Splashes in the eyes may cause irritation and reversible damage
It is generally agreed that substances contained are likely to cause, when applied to the eye of an animal, the
appearance of major lesions which persist for at least twenty-four hours

12 - ECOLOGICAL INFORMATION
No ecological data on the product itself is available.
The product must not be allowed to run into drains or waterways.

13 - DISPOSAL CONSIDERATIONS
Do not pour into drains or waterways.

14 - TRANSPORT INFORMATION
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and ICAO/IATA for air
transport
UN 1263 = Paint flammable (including lacquer, enamel, stain, shellac, varnish, polish and related material).
ADR/RID Class Number Code Identif. Label
3 31掳 c) 30 1263 3
IMDG Page N掳ONU Class Number 2掳Label Identif. N掳GSMU
1263 3.3 III - 3-05 310
The page number 3372 should not appear anymore on the Dangerous Goods Declaration (Amendment 28-96).
IATA N掳ONU Class 2掳Label Number Passenger Passenger Freighter Freighter nota
1263 3 - III 309 60 L 310 220 L A72
1263 3 - III Y309 10 L - - -
SICOMIN
15 - STATUTORY INFORMATION
This preparation was classified in compliance with the directive known as 88/379/EEC and its
adaptations
In addition directive 96/54/EC with the 22掳 adaptation of directive 67/548/EEC (Hazardous substances) have been taken
into account.

Preparation classification.
Harmful. Flammable.

Contains:
606-010-00-7 CYCLOHEXANONE

Particular hazards associated with the preparation and safety recommendations:
R 36 Irritating to eyes.
R 20 Harmful by inhalation.
R 10 Flammable.
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 23 Do not breathe vapour.

16 - OTHER INFORMATION
Since the user's working conditions are not known by us, the information supplied on this safety data sheet is based on
our current level of knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first obtaining
written handling instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal requirements and local
regulations.
The information given on this safety data sheet must be regarded as a description of the safety requirements relating to
our product and not a guarantee of its properties

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
lotioncrafter_com---msds_olivem800.asp 226708-41-4
lotioncrafter_com---msds_olivem900.asp 223706-40-9
lotioncrafter_com---msds_oliwaxlc.asp 540-10-3
lotioncrafter_com---msds_pepha_protect.asp 41-61-7 41-61-3 90244-99-8 56-81-5 7732-18-5
lotioncrafter_com---msds_prolipid141.asp 31566-31-1
lotioncrafter_com---msds_regu_age.asp 41-61-7 41-61-3 94350-05-7 9010-10-0 8013-01-2
lotioncrafter_com---msds_syn_tacks.asp N/A
lotioncrafter_com---msds_venuceane.asp 34-84-1
mcmc-uk_com---msds-320360-hardener-uk.asp 021-00-3 022-00-9 023-00-4 022-00-5 195-00-7 011-00-1 025-00-1 012-00-7 2007-06-1
mcmc-uk_com---msds-armstrim-feltrex-uk.asp N/A
mcmc-uk_com---msds-biotank-hardener-uk.asp 006-00-6
mcmc-uk_com---msds-clear-varnish-matt-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-clear-varnish-semi-gloss-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-cotech-e-glass.asp 2001-03-0
mcmc-uk_com---msds-dcryltop-pu-77-base-uk.asp 022-00-9 023-00-4 281-00-4 64742-95-6 025-00-1 195-00-7 345-00-4 2007-06-1
mcmc-uk_com---msds-deroxyglass-560-base.asp 022-00-9 074-00-8 38-43-5 004-00-4 37-66-2 327-00-6 356-00-4
mcmc-uk_com---msds-deroxyglass-560-hard-uk.asp 022-00-9 004-00-6
mcmc-uk_com---msds-diluant-61-161-uks.asp 022-00-9 10-38-2 023-00-4 195-00-7 356-00-4 025-00-5 10-37-5
mcmc-uk_com---msds-diluant-frsl.asp 022-00-9 195-00-7
mcmc-uk_com---msds-diluent-ep-n3.asp 064-00-3 004-00-4 025-00-1
mcmc-uk_com---msds-diluent-n6-deck-line-full-grip.asp 78-93-3
mcmc-uk_com---msds-diluent-pu-n2.asp 010-00-7 195-00-7 064-00-3 025-00-1
mcmc-uk_com---msds-diluent-pu-n4-summer.asp 010-00-7 195-00-7 025-00-1
mcmc-uk_com---msds-diluent-wp-n1.asp 021-00-3 004-00-6 002-00-5 003-00-0
mcmc-uk_com---msds-dm-03.asp 112-24-3 108-95-2 32610-77-8 111-40-0 39423-51-3
mcmc-uk_com---msds-dm-06.asp 1477-55-0 80-05-7
mcmc-uk_com---msds-emp-914-txx.asp 78-93-3
mcmc-uk_com---msds-enguard-px-uk.asp 33-04-6 100-42-5
mcmc-uk_com---msds-ep-140-hardener-uk.asp 022-00-9 004-00-6 069-00-0 160901-21-3
mcmc-uk_com---msds-ep-200-base-uk.asp 055-00-5 90640-84-9 90640-86-1 022-00-9 68410-23-1 025-00-5 043-00-3 64742-95-6 64742-82-1 060-00-0
mcmc-uk_com---msds-ep-211-base-uk.asp 074-00-8 043-00-3 022-00-9 98-82-8 025-00-5 064-00-3
mcmc-uk_com---msds-ep-213-hb-base-uk.asp 022-00-9 023-00-4 043-00-3 25068-38-6 98-82-8 025-00-5 004-00-6
mcmc-uk_com---msds-ep-215-230-fast-durc-uk.asp 022-00-9 68413-28-5 004-00-6 074-00-8 38-43-5 069-00-0 006-00-6 71074-89-0 2007-06-1
mcmc-uk_com---msds-ep-215-230-hardener-uk.asp 022-00-9 004-00-4 37-66-2 004-00-6 064-00-3 2007-06-1
mcmc-uk_com---msds-epodux-61-134-durc-uk.asp 022-00-9 10-38-2 059-00-5 34-43-5 069-00-0
mcmc-uk_com---msds-epoxyguard-455-base-uk.asp 074-00-8 68081-84-5
mcmc-uk_com---msds-epu-221-base-uk.asp 002-00-3 195-00-7 022-00-9 010-00-7 327-00-6
mcmc-uk_com---msds-epz-210-base-uk.asp 25068-38-6 043-00-3 022-00-9 023-00-4 98-82-8 025-00-5 004-00-6 64742-95-6 2007-06-1
mcmc-uk_com---msds-epz-210-hardener-uk.asp 022-00-9 023-00-4 98-82-8 025-00-5 043-00-3 004-00-6 68410-23-1 64742-95-6
mcmc-uk_com---msds-exl-1601.asp 9046-10-0 2855-13-2
mcmc-uk_com---msds-fds-aeroprim-epu-523-base-uk.asp 009-00-4 022-00-9 023-00-4 002-00-3 010-00-7 195-00-7 004-00-4
mcmc-uk_com---msds-fds-aeroxyglass-560-base-uk.asp 022-00-9 023-00-4 11-20-9 004-00-4
mcmc-uk_com---msds-fds-polystria-base-uk.asp 022-00-9 10-38-2 023-00-4 64742-95-6 53-10-3 195-00-7 345-00-4
mcmc-uk_com---msds-fds-polystria-hardener-uk.asp 195-00-7 28182-81-2 011-00-1
mcmc-uk_com---msds-filllite.asp 61132-18-1
mcmc-uk_com---msds-fr1-55-base-uk.asp N/A
mcmc-uk_com---msds-fr1-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-fr2-55-base-uk.asp N/A
mcmc-uk_com---msds-fr2-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-frs-30-base-uk.asp 025-00-1 022-00-9 195-00-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC