Written by - Checked by - A.DURRIEU : SDS : RA 560 B/A
Edition : 1 - December 2000
Jean-Pierre GROS
Technical Manager Quality assurance Page : 1/3
SAFETY DATA SHEET Aeroxyglass 560 Base
1 - IDENTIFICATION OF PREPARATION AND COMPANY/BUSINESS In the event of fire, the recommended extinguishing agents are:
Preparation: Carbon dioxide, chemical powders, foams, and other extinguishing gases.
Name: AEROXYGLASS 560 BASE In the event of fire, use specifically suitable extinguishing agents. Never use water.
Extinguishing agents not to be used
Company/business:
Water is not generally recommended since it can be ineffective; however, it can be used successfully to
Registered company name: SICOMIN
cool containers exposed to the fire and to disperse fumes.
Address: BP23 鈥? RN 568-13161 CHATEAUNEUF LES MARTIGUES Cedex
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to
E.mail: Composites@sicomin.com health.
Telephone 33 (0)4 42 42 30 20 Fax: 33 (0)4 42 81 29 29 Do not breathe in smoke.
Emergency telephone No.: 01 45 42 59 59 . Association/Organisation: ORFILA. Prevent the effluent of fire-fighting measures from entering drains or waterways.
2 - INFORMATION REGARDING CONSTITUENTS Special equipment for fire-fighting personnel.
Hazardous substances present on their own. Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.
(present in the preparation at a sufficient concentration to give it the toxicological characteristics it would 6 - MEASURES TO BE TAKEN IN THE EVENT OF ACCIDENTAL SPILLAGE
have in a 100% pure state) Safety precautions:
This preparation contains no hazardous substance in this category. Eliminate any possible source of ignition and ventilate the premises.
Other substances representing a hazard: Avoid inhaling the fumes.
No known substance in this category present. Consult the safety measures listed under headings 7 and 8.
Substances present at a concentration below the minimum danger threshold. Environmental safety precautions:
601-022-00-9 Cas 1330-20-7 XYLENE Concentration >=10.00% and <25.00%. Symbol: Xn R: 10-38- Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth,
902-20/21 vermiculite, diatom earth in drums for waste disposal.
601-023-00-4 Cas 100-41-4 ETHYLBENZENE Concentration >=0.00% and <2.50%. Symbol: Xn F R: Prevent any material from entering drains or waterways.
11-20-902 Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
Other substances with occupational exposure limits. If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with
606-004-00-4 Cas 108-10-1 METHYL ISOBUTYL KETONE Concentration >=2.50% and <10.00%. Symbol: statutory procedures
F R: 11 Cleaning methods:
3 - IDENTIFICATION OF HAZARDS Clean preferably with a detergent, do not use solvents.
This preparation is not classed as hazardous to health by directive 88/379/EEC. 7 - HANDLING AND STORAGE
This product is classed: Highly flammable liquid. The regulations relating to storage premises apply to workshops where the product is handled.
4 - FIRST AID. Handling:
As a general rule, in case of doubt or if symptoms persist, always call a doctor. Handle in well-ventilated areas.
NEVER induce swallowing in an unconscious person. The fumes are denser than air. They can spread along the ground and form explosive mixtures with air
In the event of exposure by inhalation. Prevent the formation of flammable or explosive concentrations in air and avoid vapour concentrations
In the event of inhalation, move the patient into the fresh air and keep him/her warm and still. higher than the occupational exposure limits.
In the event of splashes or contact with eyes. Fire prevention:
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open. Prevent the accumulation of electrostatic charges with connections to earth
Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment. The preparation may become electrostatically charged; always place on the ground during transfer. Wear
In the event of splashes or contact with skin. antistatic shoes and clothes and make floors of conductive materials.
Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner. Use the product in premises where there are no naked flames or other sources of ignition and have
DO NOT use solvents or thinners. protected electrical equipment
In the event of swallowing. Keep packages tightly closed and away from sources of heat, sparks and naked flames.
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water Do not use tools which may produce sparks. Do not smoke.
and consult a doctor. Prevent access by unauthorised personnel.
Keep still. DO NOT induce vomiting. Recommended equipment and procedures
If swallowed accidentally, call a doctor to assess the need for monitoring and subsequent treatment in Observe precautions stated on label and also industrial safety regulations
hospital. Show him the label. Packages which have been opened must be reclosed carefully and stored in an upright position
Avoid inhaling fumes.
5 - FIRE-FIGHTING MEASURES
Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.
SICOMIN 鈥? BP 23 鈥? RN 568 鈥? 13161 Ch芒teauneuf-les-Martigues. Tel :+33 (0)4-42-42-30-20 鈥? Fax :+33 (0)4-42-81-29-29
Written by - Checked by - A.DURRIEU : SDS : RA 560 B/A
Edition : 1 - December 2000
Jean-Pierre GROS
Technical Manager Quality assurance Page : 2/3
Where the personnel must carry out work in a booth, whether for spraying or otherwise, the ventilation may Decomposition temperature: not relevant.
be inadequate to control particles and solvent fumes in every case. Melting temperature interval: -25 掳C.
It is therefore recommended that personnel wear masks with a compressed air supply during spraying Average distillation temperature of solvents contained: 140 掳C.
operations until the concentration of particles and solvent fumes has fallen below the exposure limits. 10 - STABILITY AND REACTIVITY
Prohibited equipment and procedures. When exposed to high temperatures, the preparation may release dangerous decomposition products such
Smoking, eating and drinking are prohibited in premises where the preparation is used as carbon monoxide and dioxide, smoke and nitrogen oxide
Never open the packages under pressure Any apparatus likely to produce a flame or to have a metallic surface at high temperature (burners, electric
Storage. arcs, furnaces etc.) must not be allowed on the premises.
Keep the container tightly closed in a dry, well-ventilated place 11 - TOXICOLOGICAL INFORMATION
Keep away from all sources of ignition - do not smoke. No data is available regarding the preparation itself.
Keep well away from all sources of ignition, heat and direct sunlight Exposure to fumes from solvents contained in the preparation beyond the exposure limits stated may
The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, produce effects harmful to health, such as:
the liquid cannot spread beyond this area. Irritation of mucous membrane and respiratory system, kidneys, liver and central nervous system.
8 - EXPOSURE CONTROL - PERSONAL SAFETY Symptoms produced will include headaches, numbness, dizziness, fatigue, muscular asthenia and, in
Technical measures. extreme cases, loss of consciousness.
Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general Prolonged or repeated contact with the preparation may strip the skin of its natural oil and thus cause non-
extraction. allergic dermatitis on contact and absorption through the epidermis.
If this ventilation is insufficient to maintain the concentration of solvent fumes below the exposure limits, Splashes in the eyes may cause irritation and reversible damage
wear breathing apparatus 12 - ECOLOGICAL INFORMATION
Exposure limits per INRS ND 1945-153-93/(1996) and ND 2022-163-96: No ecological data on the product itself is available.
France VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes: TMP N掳: The product must not be allowed to run into drains or waterways.
601-022-00-9 100 435 150 650 - 4bis, 84
13 - DISPOSAL CONSIDERATIONS
601-023-00-4 100 435 - - - 84
Do not pour into drains or waterways.
606-004-00-4 50 205 - - - 84
14 - TRANSPORT INFORMATION
Germany Class: MAK-ppm: MAK-mg/m3: Notes: Notes:
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and
601-022-00-9 II,1 100 440 -
ICAO/IATA for air transport
601-023-00-4 - 100 440 *
UN 1263 = Paint flammable (including lacquer, enamel, stain, shellac, varnish, polish and related material).
606-004-00-4 II,2 100 400 -
ADR/RID Class Number Code Identif. Label
ACGIH(TLV) TWA-ppm: TWA-mg/m3: STEL-ppm: STEL-mg/m3: Notes: Notes:
3 5掳 c) 33 1263 3
601-022-00-9 100 434 150 651 -
IMDG Page N掳ONU Class Number 2掳Label Identif. N掳GSMU
601-023-00-4 100 434 125 543 -
1263 3.3 III - 3-05 310
606-004-00-4 50 205 75 307 -
The page number 3372 should not appear anymore on the Dangerous Goods Declaration (Amendment 28-
Safety breathing apparatus:
96).
Where workers encounter concentrations higher than the exposure limits, they must wear suitable,
IATA N掳ONU Class 2掳Label Number Passenger Passenger Freighter
approved masks.
Freighter nota
Hand protection.
1263 3 - III 309 60 L 310 220 L A72
Protective creams may be used for exposed skin, but they should not be applied after contact with the
1263 3 - III Y309 10 L - - -
product.
15 - STATUTORY INFORMATION
Due to the solvents present, it is recommended that polyvinyl alcohol or nitrile rubber gloves be worn.
This preparation was classified in compliance with the directive known as 88/379/EEC
Eye and face protection.
and its adaptations
Use eye protectors designed to protect against liquid splashes
In addition directive 96/54/EC with the 22掳 adaptation of directive 67/548/EEC (Hazardous substances)
Skin protection.
have been taken into account.
For further information, see 搂 11 of S.D.S. - Toxicological information.
Preparation classification.
9 - PHYSICAL PROPERTIES
Highly flammable.
Density: >1
Particular hazards associated with the preparation and safety recommendations:
Acid/base character of preparation: not relevant.
R 11 Highly flammable.
Solubility of preparation in water: Insoluble.
S 23 Do not breathe vapour.
Vapour tension at 50掳C of volatile constituents: Below 110Kpa (1.10 bar).
S 33 Take precautionary measures against static discharges.
Physical state: viscous liquid
S 16 Keep away from sources of ignition - no smoking.
Flash point interval: Flash point: <= 21掳C.
S9 Keep container in a well-ventilated place.
The pH is impossible to measure or its value is not relevant.
16 - OTHER INFORMATION
Self-ignition temperature: 450 掳C.
SICOMIN 鈥? BP 23 鈥? RN 568 鈥? 13161 Ch芒teauneuf-les-Martigues. Tel :+33 (0)4-42-42-30-20 鈥? Fax :+33 (0)4-42-81-29-29
Written by - Checked by - A.DURRIEU : SDS : RA 560 B/A
Edition : 1 - December 2000
Jean-Pierre GROS
Technical Manager Quality assurance Page : 3/3
Since the user's working conditions are not known by us, the information supplied on this safety data
sheet is based on our current level of knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first
obtaining written handling instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal
requirements and local regulations.
The information given on this safety data sheet must be regarded as a description of the safety
requirements relating to our product and not a guarantee of its properties
SICOMIN 鈥? BP 23 鈥? RN 568 鈥? 13161 Ch芒teauneuf-les-Martigues. Tel :+33 (0)4-42-42-30-20 鈥? Fax :+33 (0)4-42-81-29-29
|