1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Preparation:
Name: FRS 30 BASE
Product code: 21030XXXB.
Company/business:
Registered company name: MAP YACHTING.
Address : ZI ATHELIA IV 鈥? 296 Av de la Tramontane 鈥? 13705 LA CIOTAT - France.
Telephone : 33 (0)4 42 98 14 50 Fax :33 (0)4 42 98 14 51. Email : sales@map-yachting.com
Emergency telephone No 33 (0)1 45 42 59 59 .
Association/Organisation: ORFILA.
2 - COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous substances present on their own.
(present in the preparation at a sufficient concentration to give it the toxicological characteristics it would have in a 100% pure state)
This preparation contains no hazardous substance in this category.
Other substances representing a hazard:
INDEX 607-025-00-1 CAS 123-86-4 CE 204-658-1 N-BUTYL ACETATE | Concentration >=10.00% and <25.00%. Symbol: R: 10-66-67
Substances present at a concentration below the minimum danger threshold.
INDEX 601-022-00-9 CAS 1330-20-7 CE 215-535-7 O-XYLENE | Concentration >=2.50% and <10.00%. Symbol: Xn R: 10-38-20/21
INDEX 607-195-00-7 CAS 108-65-6 CE 203-603-9 2-METHOXY-1-METHYLETHYL ACETATE | Concentration >=2.50% and <10.00%.
Symbol: Xi R: 10-36
Other substances with occupational exposure limits.
No known substance in this category present.
3 - IDENTIFICATION OF HAZARDS
This product is classed: Flammable.
Repeated exposure may cause skin dryness or cracking.
Vapors may cause drowsiness and dizziness.
4 - FIRST AID MEASURES
As a general rule, in case of doubt or if symptoms persist, always call a doctor.
NEVER induce swallowing in an unconscious person.
In the event of exposure by inhalation.
If a large quantity is inhaled, move the patient into the fresh air and keep him/her warm and still.
In the event of splashes or contact with eyes.
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.
In the event of splashes or contact with skin.
Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner.
DO NOT use solvents or thinners.
In the event of swallowing.
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor.
If swallowed accidentally, call a doctor to assess the need for monitoring and subsequent treatment in hospital. Show him the label.
5 - FIRE-FIGHTING MEASURES
Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.
In the event of fire, the recommended extinguishing agents are:
Carbon dioxide, chemical powders, foams, and other extinguishing gases.
In the event of fire, use specifically suitable extinguishing agents. Never use water.
MSDS FRS 30 BASE
Page 1 sur 5
Version 2007-06-18
Extinguishing agents not to be used
Water is not generally recommended since it can be ineffective; however, it can be used successfully to cool containers exposed to the fire and to
disperse fumes.
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.
Do not breathe in smoke.
Prevent the effluent of fire-fighting measures from entering drains or waterways.
Special equipment for fire-fighting personnel.
Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.
6 - ACCIDENTAL RELEASE MEASURES
Safety precautions:
Eliminate any possible source of ignition and ventilate the premises.
On account of the organic solvents contained in the preparation, eliminate sources of ignition and ventilate the premises.
Avoid inhaling the vapors.
Consult the safety measures listed under headings 7 and 8.
Environmental safety precautions:
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatom earth in drums for waste
disposal.
Prevent any material from entering drains or waterways.
Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures
Cleaning methods:
Clean preferably with a detergent, do not use solvents.
7 - HANDLING AND STORAGE
The regulations relating to storage premises apply to workshops where the product is handled.
Handling:
Handle in well-ventilated areas.
The vapors are denser than air. They can spread along the ground and form explosive mixtures with air
Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the occupational exposure limits.
Fire prevention:
Prevent the accumulation of electrostatic charges with connections to earth
The preparation may become electrostatically charged; always place on the ground during transfer. Wear antistatic shoes and clothes and make
floors of conductive materials.
Use the product in premises where there are no naked flames or other sources of ignition and have protected electrical equipment
Keep packages tightly closed and away from sources of heat, sparks and naked flames.
Do not use tools which may produce sparks. Do not smoke.
Prevent access by unauthorised personnel.
Recommended equipment and procedures
For personal safety, see 搂8.
Observe precautions stated on label and also industrial safety regulations
Avoid inhaling solvent vapors and spray-gun aerosols
Packages which have been opened must be reclosed carefully and stored in an upright position
Avoid inhaling vapors.
Where the personnel must carry out work in a booth, whether for spraying or otherwise, the ventilation may be inadequate to control particles and
solvent vapors in every case.
It is therefore recommended that personnel wear masks with a compressed air supply during spraying operations until the concentration of
particles and solvent vapors has fallen below the exposure limits.
Prohibited equipment and procedures.
Smoking, eating and drinking are prohibited in premises where the preparation is used
Never open the packages under pressure
Storage.
Keep the container tightly closed in a dry place.
MSDS FRS 30 BASE
Page 2 sur 5
Version 2007-06-18
Keep away from all sources of ignition - do not smoke.
Keep well away from all sources of ignition, heat and direct sunlight
The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, the liquid cannot spread beyond this
area.
8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Technical measures.
Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.
If this ventilation is insufficient to maintain the concentration of solvent vapors below the exposure limits, wear breathing apparatus
Exposure limits per INRS ND 2098-174-99 and ND 2114-176-99:
France VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes: TMP N掳:
108-65-6 - - - - - -
123-86-4 150 710 200 940 - 84
1330-20-7 100 435 150 650 - 4bis, 84
Germany Class: MAK-ppm: MAK-mg/m3: Notes: Notes:
108-65-6 I 50 270 C
123-86-4 I 100 480 D
1330-20-7 II,1 100 440 D,*
ACGIH(TLV) TWA-ppm: TWA-mg/m3: STEL-ppm: STEL-mg/m3: Notes: Notes:
108-65-6 - - - - - -
123-86-4 150 713 200 950 - S
1330-20-7 100 434 150 651 A4 S
Exposure limits per 2000/39/EC and 98/24/EC:
EC VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes:
108-65-6 50 275 100 550 Peau
1330-20-7 50 221 100 442 Peau
Other values (2003):
UK/OES TWA: STEL: Ceiling: Definition: Criterion:
108-65-6 50 ppm 100 ppm - - -
123-86-4 150 ppm 200 ppm - - -
1330-20-7 50 ppm 100 ppm - - -
Germany/MAK TWA: STEL: Ceiling: Definition: Criterion:
108-65-6 50 ppm 50 ppm - - -
123-86-4 100 ppm 200 ppm - - -
1330-20-7 100 ppm 200 ppm - - -
Safety breathing apparatus:
Where workers encounter concentrations higher than the exposure limits, they must wear suitable, approved masks.
Hand protection.
Protective creams may be used for exposed skin, but they should not be applied after contact with the product.
Due to the solvents present, it is recommended that polyvinyl alcohol or nitrile rubber gloves be worn.
Eye and face protection.
Use eye protectors designed to protect against liquid splashes
Skin protection.
For further information, see 搂 11 of S.D.S. - Toxicological information.
9 - PHYSICAL AND CHEMICAL PROPERTIES
Density: >1
Acid/base character of preparation: not relevant.
Solubility of preparation in water: Insoluble.
Vapour tension at 50掳C of volatile constituents: Below 110 kPa (1.10 bar).
Physical state: fluid liquid
Flash point interval: 23掳C. < Flash point: <= 55掳C.
MSDS FRS 30 BASE
Page 3 sur 5
Version 2007-06-18
The pH is impossible to measure or its value is not relevant.
Self-ignition temperature: 370 掳C.
Decomposition temperature: not relevant.
Melting temperature interval: -76 掳C.
Average distillation temperature of solvents contained: 128 掳C.
10 - STABILITY AND REACTIVITY
When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide,
smoke and nitrogen oxide
11 - TOXICOLOGICAL INFORMATION
No data is available regarding the preparation itself.
Exposure to vapors from solvents contained in the preparation beyond the exposure limits stated may produce effects harmful to health, such as:
Irritation of mucous membrane and respiratory system, kidneys, liver and central nervous system.
Symptoms produced will include headaches, numbness, dizziness, fatigue, muscular asthenia and, in extreme cases, loss of consciousness.
Prolonged or repeated contact with the preparation may strip the skin of its natural oil and thus cause non-allergic dermatitis on contact and
absorption through the epidermis.
Splashes in the eyes may cause irritation and reversible damage
12 - ECOLOGICAL INFORMATION
No ecological data on the product itself is available.
The product must not be allowed to run into drains or waterways.
Other data:
Germany: WGK 2 (VwVwS vom 17/05/99, KBws)
13 - DISPOSAL CONSIDERATIONS
Do not pour into drains or waterways.
14 - TRANSPORT INFORMATION
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and ICAO/IATA for air transport
UN1263=PAINT RELATED MATERIAL (including paint thinning or reducing compound)
ADR/RID Class Code Pack gr. Label Ident. LQ Provis.
3 F1 III 3 33 LQ7 163-640E
IMDG Class 2掳Label Pack gr. LQ EMS Provis.
3 - III 5L F-E,S-E 163 223 944 955
IATA Class 2掳Label Pack gr. Passager Passager Cargo Cargo note
3 - III 309 60 L 310 220 L A3, A72
3 - III Y309 10 L - - -
15 - STATUTORY INFORMATION
This preparation was classified in compliance with the directive known as 1999/45/EC and its adaptations
In addition directive 2001/59/EC with the 28掳 adaptation of directive 67/548/EC (Hazardous substances) have been taken into account.
Preparation classification.
Flammable.
Particular hazards associated with the preparation and safety recommendations:
R 10 Flammable.
R 66 Repeated exposure may cause skin dryness or cracking.
R 67 Vapours may cause drowsiness and dizziness.
Particular provisions:
Germany: WGK 2 (VwVwS vom 17/05/99, KBws)
16 - OTHER INFORMATION
Since the user's working conditions are not known by us, the information supplied on this safety data sheet is based on our current level of
knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first obtaining written handling instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal requirements and local regulations.
MSDS FRS 30 BASE
Page 4 sur 5
Version 2007-06-18
The information given on this safety data sheet must be regarded as a description of the safety requirements relating to our product and not a
guarantee of its properties
_
MSDS FRS 30 BASE
Page 5 sur 5
Version 2007-06-18
|