Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

074-00-8
043-00-3
022-00-9
98-82-8
025-00-5
064-00-3

File Name: mcmc-uk_com---msds-ep-211-base-uk.asp
1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Identification of the substance or preparation:
EPOXY PRIMER EP 211 BASE.
Name:
Product code: H1685 B.

Company/undertaking identification:
Registered company name: MAP YACHTING.
Address : ZI ATHELIA IV 鈥? 296 Av de la Tramontane 鈥? 13705 LA CIOTAT - France.
Telephone : 33 (0)4 42 98 14 50 Fax :33 (0)4 42 98 14 51. Email : sales@map-yachting.com

Emergency telephone: 01 45 42 59 59.
Association/Organisation: ORFILA.

Use of the substance/preparation:

2 - COMPOSITION/INFORMATION ON INGREDIENTS
Full text of risk phrases appearing in section 2: see section 16.

Hazardous substances present on their own:
(present in the preparation at a sufficient concentration to give it the toxicological characteristics it would have in a 100% pure state)
INDEX CAS EC Name Symb. R: %
603-074-00-8 25068-38-6 500-033-5 REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER
AVERAGE MOLECULAR WEIGHT < 700) Xi N 36/38 43 51/53 10 <= x % < 25

Other substances representing a hazard:
INDEX CAS EC Name Symb. R: %
601-043-00-3 95-63-6 202-436-9 1,2,4-TRIMETHYLBENZENE Xn N 10 36/37/38 51/53 20 2.5 <= x % < 10

Substances present at a concentration below the minimum danger threshold:
INDEX CAS EC Name Symb. R: %
601-022-00-9 1330-20-7 215-535-7 O-XYLENE Xn 10 38 20/21 2.5 <= x % < 10
601-024-00-X 98-82-8 202-704-5 CUMENE Xn N 10 37 51/53 65 0 <= x % < 2.5
601-025-00-5 108-67-8 203-604-4 MESITYLENE Xi N 10 37 51/53 0 <= x % < 2.5

Other substances with occupational exposure limits:
INDEX CAS EC Name Symb. R: %
603-064-00-3 107-98-2 203-539-1 MONOPROPYLENE GLYCOL METHYL ETHER 10 2.5 <= x % < 10

Other components:

3 - IDENTIFICATION OF HAZARDS
This product is classed: Flammable.
Possibility of irritation to the eyes and skin.
Possibility of skin sensitisation. The preparation may also irritate the skin and prolonged contact may aggravate this effect.
Harmful to aquatic organisms, may cause long-termadverse effects in the aquatic environment.

Other data:

4 - FIRST AID MEASURES
As a general rule, in case of doubt or if symptoms persist, always call a doctor.
NEVER induce swallowing in an unconscious person.

In the event of exposure by inhalation:
If a large quantity is inhaled, move the patient into the fresh air and keep him/her warm and still.

In the event of splashes or contact with eyes:
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.


MSDS EPOXY PRIMER EP 脡&& BASE
Page 1 sur 6
Version 2007-06-15
Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.

In the event of splashes or contact with skin:
Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner.
DO NOT use solvents or thinners.

In the event of swallowing:
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor.
Keep still. DO NOT induce vomiting.
Call a doctor immediately and show him the label.
N/A

5 - FIRE-FIGHTING MEASURES
Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.

Suitable extinguishing media:
Carbon dioxide, chemical powders, foams, and other extinguishing gases.
In the event of fire, use specifically suitable extinguishing agents. Never use water.

Extinguishing media which must not be used for safety reasons:
Water is not generally recommended since it can be ineffective; however, it can be used successfully to cool containers exposed to the fire and to
disperse fumes.
A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous to health.
Do not breathe in smoke.
Prevent the effluent of fire-fighting measures from entering drains or waterways.

Special protective equipment for fire-fighters:
Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.

6 - ACCIDENTAL RELEASE MEASURES
Personal precautions:
Eliminate any possible source of ignition and ventilate the premises.
On account of the organic solvents contained in the preparation, eliminate sources of ignition and ventilate the premises.
Avoid inhaling the vapors.
Avoid any contact with the skin and eyes.
Consult the safety measures listed under headings 7 and 8.
Environmental precautions:
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for
waste disposal.
Prevent any material from entering drains or waterways.
Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures

Methods for cleaning up:
Clean preferably with a detergent, do not use solvents.

7 - HANDLING AND STORAGE
The regulations relating to storage premises apply to workshops where the product is handled.
Anyone with a history of skin sensitisation must on no account handle such products

Handling:
Handle in well-ventilated areas.
The vapors are denser than air. They can spread along the ground and form explosive mixtures with air
Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the occupational exposure limits.

Fire prevention:
Prevent the accumulation of electrostatic charges with connections to earth



MSDS EPOXY PRIMER EP 脡&& BASE
Page 2 sur 6
Version 2007-06-15
The preparation may become electrostatically charged; always place on the ground during transfer. Wear antistatic shoes and clothes and make
floors of conductive materials.
Use the product in premises where there are no naked flames or other sources of ignition and have protected electrical equipment
Keep packages tightly closed and away from sources of heat, sparks and naked flames.
Do not use tools which may produce sparks. Do not smoke.
Prevent access by unauthorised personnel.

Recommended equipment and procedures:
For personal safety, see 搂8.
Observe precautions stated on label and also industrial safety regulations
Avoid inhaling solvent vapors and spray-gun aerosols
Packages which have been opened must be reclosed carefully and stored in an upright position
Avoid inhaling vapors.
Where the personnel must carry out work in a booth, whether for spraying or otherwise, the ventilation may be inadequate to control particles and
solvent vapors in every case.
It is therefore recommended that personnel wear masks with a compressed air supply during spraying operations until the concentration of
particles and solvent vapors has fallen below the exposure limits.
Avoid contact of product with the skin and eyes

Prohibited equipment and procedures:
Smoking, eating and drinking are prohibited in premises where the preparation is used
Never open the packages under pressure

Storage:
Keep the container tightly closed in a dry place.
Keep away from all sources of ignition - do not smoke.
Keep well away from all sources of ignition, heat and direct sunlight
The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, the liquid cannot spread beyond this
area.

8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Anyone with a history of skin sensitisation must on no account handle such products.

Technical measures:
Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.
If this ventilation is insufficient to maintain the concentration of solvent vapors below the exposure limits, wear breathing apparatus

Exposure limit values per INRS ND 2098-174-99 and ND 2114-176-99:
France VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes: TMP N掳:
107-98-2 100 375 150 568 * 84 -
95-63-6 20 100 - - - 84 -
108-67-8 20 100 - - - 84 -
98-82-8 20 100 50 250 * 84 -
1330-20-7 50 221 100 442 * 4 bis, 84 -

Exposure limit values per 2000/39/EC and 98/24/EC:
EC VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes:
107-98-2 100 375 150 568 Peau
95-63-6 20 100 - - -
108-67-8 20 100 - - -
98-82-8 20 100 50 250 Peau
1330-20-7 50 221 100 442 Peau

Respiratory protection:
Where workers encounter concentrations higher than the exposure limits, they must wear suitable, approved masks.

Hand protection:
Protective creams may be used for exposed skin, but they should not be applied after contact with the product.
Due to the solvents present, it is recommended that polyvinyl alcohol or nitrile rubber gloves be worn.

MSDS EPOXY PRIMER EP 脡&& BASE
Page 3 sur 6
Version 2007-06-15
Eye and face protection:
Avoid contact with eyes.
Wear safety goggles.
Provide eye washes in workshops where the product is constantly handled

Skin protection:
For further information, see 搂 11 of S.D.S. - Toxicological information.

9 - PHYSICAL AND CHEMICAL PROPERTIES
General information:
Physical state: viscous liquid

Important health, safety and environmental information:
pH of the substance or preparation: not relevant.
The pH is impossible to measure or its value is not relevant.
Boiling point/boiling range: not specified.
Flash point interval: 23掳C. < Flash point: <= 55掳C.
vapour pressure: Below 110 kPa (1.10 bar).
Density: >1
water solubility: Insoluble.

Other information:
melting point/melting range: not specified.
Self-ignition temperature: not specified.
Decomposition point/decomposition range : not specified.

10 - STABILITY AND REACTIVITY
When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide,
smoke and nitrogen oxide

Conditions to avoid:
Materials to avoid:
Hazardous decomposition products:

11 - TOXICOLOGICAL INFORMATION
No data is available regarding the preparation itself.
Exposure to vapors from solvents contained in the preparation beyond the exposure limits stated may produce effects harmful to health, such as:
Irritation of mucous membrane and respiratory system, kidneys, liver and central nervous system.
Symptoms produced will include headaches, numbness, dizziness, fatigue, muscular asthenia and, in extreme cases, loss of consciousness.
Prolonged or repeated contact with the preparation may strip the skin of its natural oil and thus cause non-allergic dermatitis on contact and
absorption through the epidermis.
Splashes in the eyes may cause irritation and reversible damage
It is generally agreed that substances contained are likely to cause the appearance of major lesions which persist for at least twenty-four hours
after application to the eye of an animal
and are likely to cause significant irritation which lasts for at least twenty four hours after application to the healthy, unbroken skin of an animal for
a period of up to 4 hours.
It is generally agreed that substances contained are likely to cause, among certain predisposed subjects, a sensitisation reaction by cutaneous
route
On the basis of the properties of the epoxide components and toxicological data relating to similar preparations, the preparation may cause
sensitisation of the skin and the respiratory organs and may also be an irritant
Constituents with a low molecular weight irritate the eyes, mucous membranes and the skin
Repeated contact with the skin may cause irritation and hypersensitisation, possibly in combination with other epoxide compounds.

In the event of exposure by inhalation:
In the event of swallowing:
In the event of splashes or contact with skin:

MSDS EPOXY PRIMER EP 脡&& BASE
Page 4 sur 6
Version 2007-06-15
In the event of splashes or contact with eyes:
Other data:

12 - ECOLOGICAL INFORMATION
No ecological data on the product itself is available.
The product must not be allowed to run into drains or waterways.

Mobility:
Persistence and degradability:
Bioaccumulative potential:
Ecotoxicity:
Harmful to aquatic organisms, may cause long-termadverse effects in the aquatic environment.

Other adverse effects:

13 - DISPOSAL CONSIDERATIONS
Do not pour into drains or waterways.
Waste:
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Do not contaminate the ground or water with waste, do not dispose of waste into the environment.

Soiled packaging:
Empty container completely. Keep label(s) on container.
Give to a certified disposal contractor.

Local arrangements:
Codes of wastes (Decision 2001/573/EC, Directive 75/442/EEC, Directive 91/689/EEC on hazardous waste) :

14 - TRANSPORT INFORMATION
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and ICAO/IATA for air transport (ADR 2005 - IMDG
2004 - ICAO/IATA 2005).
UN1263=PAINT (including paint, lacquer, enamel, stain, shellac, varnish, polish, liquid filler and liquid lacquer base) or PAINT RELATED
MATERIAL (including paint thinning and reducing compound)
ADR/RID Class Code Pack gr. Label Ident. LQ Provis.
3 F1 III 3 30 LQ7 163-650-640E
Not subject to this regulation if Q < 450l.
IMDG Class 2掳Label Pack gr. LQ EMS Provis.
3 - III 5L F-E,S-E 163 223 944 955
Not subject to this regulation if Q < 30l
Marine Pollutant P
IATA Class 2掳Label Pack gr. Passager Passager Cargo Cargo note
3 - III 309 60 L 310 220 L A3 A72
3 - III Y309 10 L - - -

15 - STATUTORY INFORMATION
This preparation was classified in compliance with the directive known as 1999/45/EC and its adaptations
In addition directive 2001/59/EC with the 28掳 adaptation of directive 67/548/EEC (Hazardous substances) have been taken into account.

Preparation classification:
Irritant. Flammable.
Contains:
603-074-00-8 REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE MOLECULAR
WEIGHT < 700)

Particular hazards associated with the preparation and safety recommendations:

MSDS EPOXY PRIMER EP 脡&& BASE
Page 5 sur 6
Version 2007-06-15
R 52/53 Harmful to aquatic organisms, may cause long-termadverse effects in the aquatic environment.
R 43 May cause sensitization by skin contact.
R 36/38 Irritating to eyes and skin.
R 10 Flammable.
S 23 Do not breathe vapour.
S 24 Avoid contact with skin.
S 37 Wear suitable gloves.
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 39 Wear eye/face protection.
S 60 This material and its container must be disposed of as hazardous waste.
Marine Pollutant P.

Particular provisions:

16 - OTHER INFORMATION
Since the user's working conditions are not known by us, the information supplied on this safety data sheet is based on our current level of
knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first obtaining written handling instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal requirements and local regulations.
The information given on this safety data sheet must be regarded as a description of the safety requirements relating to our product and not a
guarantee of its properties

Full text of risk phrases appearing in section 2:
R 10 Flammable.
R 20 Harmful by inhalation.
R 20/21 Harmful by inhalation and in contact with skin.
R 36/37/38 Irritating to eyes, respiratory system and skin.
R 36/38 Irritating to eyes and skin.
R 37 Irritating to respiratory system.
R 38 Irritating to skin.
R 43 May cause sensitization by skin contact.
R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R 65 Harmful. may cause lung damage if swallowed.


_




MSDS EPOXY PRIMER EP 脡&& BASE
Page 6 sur 6
Version 2007-06-15

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
lotioncrafter_com---msds_olivem800.asp 226708-41-4
lotioncrafter_com---msds_olivem900.asp 223706-40-9
lotioncrafter_com---msds_oliwaxlc.asp 540-10-3
lotioncrafter_com---msds_pepha_protect.asp 41-61-7 41-61-3 90244-99-8 56-81-5 7732-18-5
lotioncrafter_com---msds_prolipid141.asp 31566-31-1
lotioncrafter_com---msds_regu_age.asp 41-61-7 41-61-3 94350-05-7 9010-10-0 8013-01-2
lotioncrafter_com---msds_syn_tacks.asp N/A
lotioncrafter_com---msds_venuceane.asp 34-84-1
mcmc-uk_com---msds-320360-hardener-uk.asp 021-00-3 022-00-9 023-00-4 022-00-5 195-00-7 011-00-1 025-00-1 012-00-7 2007-06-1
mcmc-uk_com---msds-armstrim-feltrex-uk.asp N/A
mcmc-uk_com---msds-biotank-hardener-uk.asp 006-00-6
mcmc-uk_com---msds-clear-varnish-matt-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-clear-varnish-semi-gloss-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-cotech-e-glass.asp 2001-03-0
mcmc-uk_com---msds-dcryltop-pu-77-base-uk.asp 022-00-9 023-00-4 281-00-4 64742-95-6 025-00-1 195-00-7 345-00-4 2007-06-1
mcmc-uk_com---msds-deroxyglass-560-base.asp 022-00-9 074-00-8 38-43-5 004-00-4 37-66-2 327-00-6 356-00-4
mcmc-uk_com---msds-deroxyglass-560-hard-uk.asp 022-00-9 004-00-6
mcmc-uk_com---msds-diluant-61-161-uks.asp 022-00-9 10-38-2 023-00-4 195-00-7 356-00-4 025-00-5 10-37-5
mcmc-uk_com---msds-diluant-frsl.asp 022-00-9 195-00-7
mcmc-uk_com---msds-diluent-ep-n3.asp 064-00-3 004-00-4 025-00-1
mcmc-uk_com---msds-diluent-n6-deck-line-full-grip.asp 78-93-3
mcmc-uk_com---msds-diluent-pu-n2.asp 010-00-7 195-00-7 064-00-3 025-00-1
mcmc-uk_com---msds-diluent-pu-n4-summer.asp 010-00-7 195-00-7 025-00-1
mcmc-uk_com---msds-diluent-wp-n1.asp 021-00-3 004-00-6 002-00-5 003-00-0
mcmc-uk_com---msds-dm-03.asp 112-24-3 108-95-2 32610-77-8 111-40-0 39423-51-3
mcmc-uk_com---msds-dm-06.asp 1477-55-0 80-05-7
mcmc-uk_com---msds-emp-914-txx.asp 78-93-3
mcmc-uk_com---msds-enguard-px-uk.asp 33-04-6 100-42-5
mcmc-uk_com---msds-ep-140-hardener-uk.asp 022-00-9 004-00-6 069-00-0 160901-21-3
mcmc-uk_com---msds-ep-200-base-uk.asp 055-00-5 90640-84-9 90640-86-1 022-00-9 68410-23-1 025-00-5 043-00-3 64742-95-6 64742-82-1 060-00-0
mcmc-uk_com---msds-ep-211-base-uk.asp 074-00-8 043-00-3 022-00-9 98-82-8 025-00-5 064-00-3
mcmc-uk_com---msds-ep-213-hb-base-uk.asp 022-00-9 023-00-4 043-00-3 25068-38-6 98-82-8 025-00-5 004-00-6
mcmc-uk_com---msds-ep-215-230-fast-durc-uk.asp 022-00-9 68413-28-5 004-00-6 074-00-8 38-43-5 069-00-0 006-00-6 71074-89-0 2007-06-1
mcmc-uk_com---msds-ep-215-230-hardener-uk.asp 022-00-9 004-00-4 37-66-2 004-00-6 064-00-3 2007-06-1
mcmc-uk_com---msds-epodux-61-134-durc-uk.asp 022-00-9 10-38-2 059-00-5 34-43-5 069-00-0
mcmc-uk_com---msds-epoxyguard-455-base-uk.asp 074-00-8 68081-84-5
mcmc-uk_com---msds-epu-221-base-uk.asp 002-00-3 195-00-7 022-00-9 010-00-7 327-00-6
mcmc-uk_com---msds-epz-210-base-uk.asp 25068-38-6 043-00-3 022-00-9 023-00-4 98-82-8 025-00-5 004-00-6 64742-95-6 2007-06-1
mcmc-uk_com---msds-epz-210-hardener-uk.asp 022-00-9 023-00-4 98-82-8 025-00-5 043-00-3 004-00-6 68410-23-1 64742-95-6
mcmc-uk_com---msds-exl-1601.asp 9046-10-0 2855-13-2
mcmc-uk_com---msds-fds-aeroprim-epu-523-base-uk.asp 009-00-4 022-00-9 023-00-4 002-00-3 010-00-7 195-00-7 004-00-4
mcmc-uk_com---msds-fds-aeroxyglass-560-base-uk.asp 022-00-9 023-00-4 11-20-9 004-00-4
mcmc-uk_com---msds-fds-polystria-base-uk.asp 022-00-9 10-38-2 023-00-4 64742-95-6 53-10-3 195-00-7 345-00-4
mcmc-uk_com---msds-fds-polystria-hardener-uk.asp 195-00-7 28182-81-2 011-00-1
mcmc-uk_com---msds-filllite.asp 61132-18-1
mcmc-uk_com---msds-fr1-55-base-uk.asp N/A
mcmc-uk_com---msds-fr1-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-fr2-55-base-uk.asp N/A
mcmc-uk_com---msds-fr2-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-frs-30-base-uk.asp 025-00-1 022-00-9 195-00-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC