1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Preparation:
AEROPRIM EP 140 DURCISSEUR - HARDENER
Name:
SEAPRIM EP 140 DURCISSEUR - HARDENER
Product code: 21530000D.
Company/business:
Registered company name: MAP YACHTING.
Address : ZI ATHELIA IV 鈥? 296 Av de la Tramontane 鈥? 13705 LA CIOTAT - France.
Telephone : 33 (0)4 42 98 14 50 Fax :33 (0)4 42 98 14 51. Email : sales@map-yachting.com
Emergency telephone No 33 (0)1 45 42 59 59 .
Association/Organisation: ORFILA.
2 - COMPOSITION/INFORMATION ON INGREDIENTS
Hazardous substances present on their own.
(present in the preparation at a sufficient concentration to give it the toxicological characteristics it would have in a 100% pure state)
INDEX 601-022-00-9 CAS 1330-20-7 CE 215-535-7 O-XYLENE | Concentration >=25.00% and <50.00%. Symbol: Xn R: 10-38-20/21
INDEX 603-004-00-6 CAS 71-36-3 CE 200-751-6 N-BUTANOL | Concentration >=25.00% and <50.00%. Symbol: Xn R: 10-37/38-41-
67-22
Other substances representing a hazard:
INDEX 603-069-00-0 CAS 90-72-2 CE 202-013-9 2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL | Concentration >=0.00% and
<2.50%. Symbol: Xn R: 22-36/38
M090 CAS 160901-21-3 POLYAMINOAMIDE | Concentration >=10.00% and <25.00%. Symbol: Xi R: 43-36/38
Substances present at a concentration below the minimum danger threshold.
No known substance in this category present.
Other substances with occupational exposure limits.
No known substance in this category present.
3 - IDENTIFICATION OF HAZARDS
This product is classed: Flammable.
Possibility of serious lesions to the eyes.
Possibility of skin sensitisation. The preparation may also irritate the skin and prolonged contact may aggravate this effect.
Possibility of noxious effects with symptoms of slight poisoning by inhalation, contact with the skin and swallowing.
4 - FIRST AID MEASURES
As a general rule, in case of doubt or if symptoms persist, always call a doctor.
NEVER induce swallowing in an unconscious person.
In the event of exposure by inhalation.
If a large quantity is inhaled, move the patient into the fresh air and keep him/her warm and still.
If breathing is irregular or has stopped, effect mouth-to-mouth resuscitation and call a doctor.
Do not give the patient anything orally.
In the event of splashes or contact with eyes.
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.
If there is any redness, pain or visual impairment, consult an ophthalmologist.
In the event of splashes or contact with skin.
Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised cleaner.
MSDS AEROPRIM EP 140 HARDENER
Page 1 sur 5
Version 2007-06-15
DO NOT use solvents or thinners.
If the contaminated area is widespread and/or there is damage to the skin, a doctor must be consulted or the patient transferred to hospital
In the event of swallowing.
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water, administer activated medical charcoal
and consult a doctor.
Keep still. DO NOT induce vomiting.
Consult a doctor and show him the label.
If swallowed accidentally, call a doctor to assess the need for monitoring and subsequent treatment in hospital. Show him the label.
5 - FIRE-FIGHTING MEASURES
Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.
In the event of fire, the recommended extinguishing agents are:
Special foams for polar liquids (known as alcohol resistant), powders, carbon dioxide.
In the event of fire, use specifically suitable extinguishing agents. Never use water.
Extinguishing agents not to be used
Do not breathe in smoke.
Prevent the effluent of fire-fighting measures from entering drains or waterways.
Special equipment for fire-fighting personnel.
Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.
6 - ACCIDENTAL RELEASE MEASURES
Safety precautions:
Eliminate any possible source of ignition and ventilate the premises.
On account of the organic solvents contained in the preparation, eliminate sources of ignition and ventilate the premises.
Avoid inhaling the vapors.
Avoid any contact with the skin and eyes.
Consult the safety measures listed under headings 7 and 8.
Environmental safety precautions:
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatom earth in drums for waste
disposal.
Prevent any material from entering drains or waterways.
Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures
Cleaning methods:
Clean preferably with a detergent, do not use solvents.
7 - HANDLING AND STORAGE
The regulations relating to storage premises apply to workshops where the product is handled.
Anyone with a history of skin sensitisation must on no account handle such products
Handling:
Handle in well-ventilated areas.
The vapors are denser than air. They can spread along the ground and form explosive mixtures with air
Prevent the formation of flammable or explosive concentrations in air and avoid vapor concentrations higher than the occupational exposure limits.
Fire prevention:
Prevent the accumulation of electrostatic charges with connections to earth
The preparation may become electrostatically charged; always place on the ground during transfer. Wear antistatic shoes and clothes and make
floors of conductive materials.
Use the product in premises where there are no naked flames or other sources of ignition and have protected electrical equipment
Keep packages tightly closed and away from sources of heat, sparks and naked flames.
Do not use tools which may produce sparks. Do not smoke.
Prevent access by unauthorised personnel.
MSDS AEROPRIM EP 140 HARDENER
Page 2 sur 5
Version 2007-06-15
Recommended equipment and procedures
For personal safety, see 搂8.
Observe precautions stated on label and also industrial safety regulations
Avoid inhaling solvent vapors and spray-gun aerosols
Packages which have been opened must be reclosed carefully and stored in an upright position
Avoid inhaling vapors.
Where the personnel must carry out work in a booth, whether for spraying or otherwise, the ventilation may be inadequate to control particles and
solvent vapors in every case.
It is therefore recommended that personnel wear masks with a compressed air supply during spraying operations until the concentration of
particles and solvent vapors has fallen below the exposure limits.
Product must not come into contact with the eyes
Prohibited equipment and procedures.
Smoking, eating and drinking are prohibited in premises where the preparation is used
Never open the packages under pressure
Storage.
Keep the container tightly closed in a dry, well-ventilated place
Keep away from food and drink, including those for animals.
Keep away from all sources of ignition - do not smoke.
Keep well away from all sources of ignition, heat and direct sunlight
The floor must be impermeable and form a collecting basin so that, in the event of an accidental spillage, the liquid cannot spread beyond this
area.
8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Anyone with a history of skin sensitisation must on no account handle such products.
Technical measures.
Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general extraction.
If this ventilation is insufficient to maintain the concentration of solvent vapors below the exposure limits, wear breathing apparatus
Exposure limits per INRS ND 2098-174-99 and ND 2114-176-99:
France VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes: TMP N掳:
71-36-3 - - 50 150 - 84
1330-20-7 100 435 150 650 - 4bis, 84
Germany Class: MAK-ppm: MAK-mg/m3: Notes: Notes:
71-36-3 II,1 100 310 D
1330-20-7 II,1 100 440 D,*
ACGIH(TLV) TWA-ppm: TWA-mg/m3: STEL-ppm: STEL-mg/m3: Notes: Notes:
71-36-3 (50) (152) - - (*) P
1330-20-7 100 434 150 651 A4 S
Exposure limits per 2000/39/EC and 98/24/EC:
EC VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes:
1330-20-7 50 221 100 442 Peau
Other values (2003):
UK/OES TWA: STEL: Ceiling: Definition: Criterion:
71-36-3 - 50 ppm - - -
1330-20-7 50 ppm 100 ppm - - -
Germany/MAK TWA: STEL: Ceiling: Definition: Criterion:
71-36-3 100 ppm 100 ppm - - -
1330-20-7 100 ppm 200 ppm - - -
Safety breathing apparatus:
With this preparation, avoid in particular any inhalation of vapors.
Hand protection.
Protective creams may be used for exposed skin, but they should not be applied after contact with the product.
MSDS AEROPRIM EP 140 HARDENER
Page 3 sur 5
Version 2007-06-15
Due to the solvents present, it is recommended that neoprene rubber or nitrile rubber gloves be worn
Eye and face protection.
Avoid contact with eyes.
Wear safety goggles.
Provide eye washes in workshops where the product is constantly handled
Skin protection.
For further information, see 搂 11 of S.D.S. - Toxicological information.
9 - PHYSICAL AND CHEMICAL PROPERTIES
Density: <1
Acid/base character of preparation: not relevant.
Solubility of preparation in water: Insoluble.
Vapour tension at 50掳C of volatile constituents: Between 110 kPa and 175 kPa inclusive.
Physical state: fluid liquid
Flash point interval: 23掳C. < Flash point: <= 55掳C.
The pH is impossible to measure or its value is not relevant.
Self-ignition temperature: 372 掳C.
Decomposition temperature: not relevant.
Melting temperature interval: -89 掳C.
Average distillation temperature of solvents contained: 119 掳C.
10 - STABILITY AND REACTIVITY
When exposed to high temperatures, the preparation may release dangerous decomposition products such as carbon monoxide and dioxide,
smoke and nitrogen oxide
11 - TOXICOLOGICAL INFORMATION
No data is available regarding the preparation itself.
Splashes in the eyes may cause irritation and reversible damage
It is generally agreed that substances contained are likely to cause, when applied to the eye of an animal, serious eye damage which persists for
at least twenty-four hours.
It is generally agreed that substances contained are likely to cause, among certain predisposed subjects, a sensitisation reaction by cutaneous
route
12 - ECOLOGICAL INFORMATION
No ecological data on the product itself is available.
The product must not be allowed to run into drains or waterways.
Other data:
Germany: WGK 2 (VwVwS vom 17/05/99, KBws)
13 - DISPOSAL CONSIDERATIONS
Do not pour into drains or waterways.
14 - TRANSPORT INFORMATION
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and ICAO/IATA for air transport
UN1263=PAINT RELATED MATERIAL (including paint thinning or reducing compound)
ADR/RID Class Code Pack gr. Label Ident. LQ Provis.
3 F1 III 3 33 LQ7 163-640E
IMDG Class 2掳Label Pack gr. LQ EMS Provis.
3 - III 5L F-E,S-E 163 223 944 955
IATA Class 2掳Label Pack gr. Passager Passager Cargo Cargo note
3 - III 309 60 L 310 220 L A3, A72
3 - III Y309 10 L - - -
15 - STATUTORY INFORMATION
This preparation was classified in compliance with the directive known as 1999/45/EC and its adaptations
MSDS AEROPRIM EP 140 HARDENER
Page 4 sur 5
Version 2007-06-15
In addition directive 2001/59/EC with the 28掳 adaptation of directive 67/548/EC (Hazardous substances) have been taken into account.
Preparation classification.
Harmful. Flammable.
Contains:
601-022-00-9 O-XYLENE
603-004-00-6 N-BUTANOL
603-069-00-0 2,4,6-TRIS(DIMETHYLAMINOMETHYL)PHENOL
M090 POLYAMINOAMIDE
Particular hazards associated with the preparation and safety recommendations:
R 43 May cause sensitization by skin contact.
R 37/38 Irritating to respiratory system and skin.
R 20/21/22 Harmful by inhalation, in contact with skin and if swallowed.
R 10 Flammable.
R 41 Risk of serious damage to eyes.
S 23 Do not breathe gas/fumes/vapour/spray (appropriate wording to be specified by the manufacturer).
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves and eye/ face protection.
S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
S 25 Avoid contact with eyes.
S 28 After contact with skin, wash immediately with plenty of ... (to be specified by the manufacturer ).
S 60 This material and its container must be disposed of as hazardous waste.
S 7/9 Keep container tightly closed and in a well- ventilated place.
Particular provisions:
Germany: WGK 2 (VwVwS vom 17/05/99, KBws)
16 - OTHER INFORMATION
Since the user's working conditions are not known by us, the information supplied on this safety data sheet is based on our current level of
knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first obtaining written handling instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal requirements and local regulations.
The information given on this safety data sheet must be regarded as a description of the safety requirements relating to our product and not a
guarantee of its properties
_
MSDS AEROPRIM EP 140 HARDENER
Page 5 sur 5
Version 2007-06-15
|