Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

074-00-8
68081-84-5

File Name: mcmc-uk_com---msds-epoxyguard-455-base-uk.asp
1 - IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Identification of the substance or preparation:
EPOXYGUARD 455 BLANC BASE.
Name:
Product code: H1688 B.

Company/undertaking identification:
Registered company name: MAP YACHTING.
Address : ZI ATHELIA IV 鈥? 296 Av de la Tramontane 鈥? 13705 LA CIOTAT - France.
Telephone : 33 (0)4 42 98 14 50 Fax :33 (0)4 42 98 14 51. Email : sales@map-yachting.com

Emergency telephone: 01 45 42 59 59.
Association/Organisation: ORFILA.

Use of the substance/preparation:

2 - COMPOSITION/INFORMATION ON INGREDIENTS
Full text of risk phrases appearing in section 2: see section 16.

Hazardous substances present on their own:
(present in the preparation at a sufficient concentration to give it the toxicological characteristics it would have in a 100% pure state)
INDEX CAS EC Name Symb. R: %
603-074-00-8 25068-38-6 500-033-5 REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER
AVERAGE MOLECULAR WEIGHT < 700) Xi N 36/38 43 51/53 25 <= x % < 50
M 00100 68081-84-5 268-35-82 C13/C15-ALKYKGLYCIDYLETHER Xi N 36/38 43 51/53 2.5 <= x % < 10

Other substances representing a hazard:
No known substance in this category present.

Substances present at a concentration below the minimum danger threshold:
No known substance in this category present.

Other substances with occupational exposure limits:
No known substance in this category present.

Other components:

3 - IDENTIFICATION OF HAZARDS
This product is not classed as flammable. Refer to the recommendations regarding the other products present on the site
Possibility of irritation to the eyes and skin.
Possibility of skin sensitisation. The preparation may also irritate the skin and prolonged contact may aggravate this effect.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Other data:

4 - FIRST AID MEASURES
As a general rule, in case of doubt or if symptoms persist, always call a doctor.
NEVER induce swallowing in an unconscious person.
In the event of exposure by inhalation:
In the event of splashes or contact with eyes:
Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.
In the event of splashes or contact with skin:
DO NOT use solvents or thinners.

In the event of swallowing:
In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with water and consult a doctor.

MSDS EPOXYGUARD 455 BASE
Page 1 sur 5
Version 2007-06-18
Call a doctor immediately and show him the label.

5 - FIRE-FIGHTING MEASURES
Suitable extinguishing media:
N/A

Extinguishing media which must not be used for safety reasons:
N/A

Special protective equipment for fire-fighters:
N/A
N/A
N/A
N/A

6 - ACCIDENTAL RELEASE MEASURES
Personal precautions:
Avoid any contact with the skin and eyes.
Consult the safety measures listed under headings 7 and 8.

Environmental precautions:
Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth, vermiculite, diatomaceous earth in drums for
waste disposal.
Prevent any material from entering drains or waterways.
Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance with statutory procedures

Methods for cleaning up:
Clean preferably with a detergent, do not use solvents.

7 - HANDLING AND STORAGE
The regulations relating to storage premises apply to workshops where the product is handled.
Anyone with a history of skin sensitisation must on no account handle such products

Handling:
Fire prevention:
Prevent access by unauthorised personnel.
Recommended equipment and procedures:
For personal safety, see 搂8.
Observe precautions stated on label and also industrial safety regulations
Avoid contact of product with the skin and eyes

Prohibited equipment and procedures:
Smoking, eating and drinking are prohibited in premises where the preparation is used
Never open the packages under pressure

Storage:
Keep the container tightly closed in a dry place.

8 - EXPOSURE CONTROLS/PERSONAL PROTECTION
Anyone with a history of skin sensitisation must on no account handle such products.

Technical measures:
Exposure limit values per INRS ND 2098-174-99 and ND 2114-176-99:
Exposure limit values per 2000/39/EC and 98/24/EC:
Substance in this category unknown.

Respiratory protection:
MSDS EPOXYGUARD 455 BASE
Page 2 sur 5
Version 2007-06-18
Hand protection:
Protective creams may be used for exposed skin, but they should not be applied after contact with the product.
In the event of prolonged or repeated contact with the hands, use appropriate gloves.

Eye and face protection:
Avoid contact with eyes.
Wear safety goggles.
Provide eye washes in workshops where the product is constantly handled
Skin protection:
For further information, see 搂 11 of S.D.S. - Toxicological information.

9 - PHYSICAL AND CHEMICAL PROPERTIES
General information:
Physical state: viscous liquid

Important health, safety and environmental information:
pH of the substance or preparation: not relevant.
The pH is impossible to measure or its value is not relevant.
Boiling point/boiling range: not specified.
Flash point interval: Flash point: > 61掳C
vapour pressure: Below 110 kPa (1.10 bar).
Density: >1
water solubility: Insoluble.

Other information:
melting point/melting range: not specified.
Self-ignition temperature: not specified.
Decomposition point/decomposition range : not specified.

10 - STABILITY AND REACTIVITY
The preparation is stable at the handling and storage conditions recommended per 搂 7 of the safety data sheet,

Conditions to avoid:
Materials to avoid:
Hazardous decomposition products:

11 - TOXICOLOGICAL INFORMATION
No data is available regarding the preparation itself.
It is generally agreed that substances contained are likely to cause the appearance of major lesions which persist for at least twenty-four hours
after application to the eye of an animal
and are likely to cause significant irritation which lasts for at least twenty four hours after application to the healthy, unbroken skin of an animal for
a period of up to 4 hours.
It is generally agreed that substances contained are likely to cause, among certain predisposed subjects, a sensitisation reaction by cutaneous
route
On the basis of the properties of the epoxide components and toxicological data relating to similar preparations, the preparation may cause
sensitisation of the skin and the respiratory organs and may also be an irritant
Constituents with a low molecular weight irritate the eyes, mucous membranes and the skin
Repeated contact with the skin may cause irritation and hypersensitisation, possibly in combination with other epoxide compounds.

In the event of exposure by inhalation:
In the event of swallowing:
In the event of splashes or contact with skin:
In the event of splashes or contact with eyes:
Other data:

MSDS EPOXYGUARD 455 BASE
Page 3 sur 5
Version 2007-06-18
12 - ECOLOGICAL INFORMATION
No ecological data on the product itself is available.
The product must not be allowed to run into drains or waterways.
Mobility:
Persistence and degradability:
Bioaccumulative potential:
Ecotoxicity:
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Other adverse effects:

13 - DISPOSAL CONSIDERATIONS
Do not pour into drains or waterways.

Waste:
Recycle or dispose of waste in compliance with current legislation, preferably via a certified collector or company.
Do not contaminate the ground or water with waste, do not dispose of waste into the environment.
Soiled packaging:
Empty container completely. Keep label(s) on container.
Give to a certified disposal contractor.

Local arrangements:
Codes of wastes (Decision 2001/573/EC, Directive 75/442/EEC, Directive 91/689/EEC on hazardous waste) :

14 - TRANSPORT INFORMATION
Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and ICAO/IATA for air transport (ADR 2005 - IMDG
2004 - ICAO/IATA 2005).
UN3082=ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
ADR/RID Class Code Pack gr. Label Ident. LQ Provis.
9 M6 III 9 90 LQ7 274
IMDG Class 2掳Label Pack gr. LQ EMS Provis.
9 - III 5L F-A,S-F 274 909 944
IATA Class 2掳Label Pack gr. Passager Passager Cargo Cargo note
9 - III 914 No Limit 914 No Limit A97
9 - III Y914 30 kg G - - -

15 - STATUTORY INFORMATION
This preparation was classified in compliance with the directive known as 1999/45/EC and its adaptations
In addition directive 2001/59/EC with the 28掳 adaptation of directive 67/548/EEC (Hazardous substances) have been taken into account.

Preparation classification:
Irritant. Dangerous for the environment.
Contains:
603-074-00-8 REACTION PRODUCT: BISPHENOL-A-(EPICHLORHYDRIN) EPOXY RESIN (NUMBER AVERAGE MOLECULAR
WEIGHT < 700)
M 00100 C13/C15-ALKYKGLYCIDYLETHER

Particular hazards associated with the preparation and safety recommendations:
R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
R 43 May cause sensitization by skin contact.
R 36/38 Irritating to eyes and skin.
S 23 Do not breathe vapour.
S 24 Avoid contact with skin.
S 37 Wear suitable gloves.
S 61 Avoid release to the environment. Refer to special instructions/Safety data sheets.
MSDS EPOXYGUARD 455 BASE
Page 4 sur 5
Version 2007-06-18
S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S 39 Wear eye/face protection.
S 60 This material and its container must be disposed of as hazardous waste.
S 57 Use appropriate containment to avoid environmental contamination.

Particular provisions:

16 - OTHER INFORMATION
Since the user's working conditions are not known by us, the information supplied on this safety data sheet is based on our current level of
knowledge and on national and community regulations.
The product must not be used for any purposes other than those specified under heading 1 without first obtaining written handling instructions.
It is at all times the responsibility of the user to take all necessary measures to comply with legal requirements and local regulations.
The information given on this safety data sheet must be regarded as a description of the safety requirements relating to our product and not a
guarantee of its properties

Full text of risk phrases appearing in section 2:
R 36/38 Irritating to eyes and skin.
R 43 May cause sensitization by skin contact.
R 51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.


_




MSDS EPOXYGUARD 455 BASE
Page 5 sur 5
Version 2007-06-18

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
lotioncrafter_com---msds_olivem800.asp 226708-41-4
lotioncrafter_com---msds_olivem900.asp 223706-40-9
lotioncrafter_com---msds_oliwaxlc.asp 540-10-3
lotioncrafter_com---msds_pepha_protect.asp 41-61-7 41-61-3 90244-99-8 56-81-5 7732-18-5
lotioncrafter_com---msds_prolipid141.asp 31566-31-1
lotioncrafter_com---msds_regu_age.asp 41-61-7 41-61-3 94350-05-7 9010-10-0 8013-01-2
lotioncrafter_com---msds_syn_tacks.asp N/A
lotioncrafter_com---msds_venuceane.asp 34-84-1
mcmc-uk_com---msds-320360-hardener-uk.asp 021-00-3 022-00-9 023-00-4 022-00-5 195-00-7 011-00-1 025-00-1 012-00-7 2007-06-1
mcmc-uk_com---msds-armstrim-feltrex-uk.asp N/A
mcmc-uk_com---msds-biotank-hardener-uk.asp 006-00-6
mcmc-uk_com---msds-clear-varnish-matt-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-clear-varnish-semi-gloss-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-cotech-e-glass.asp 2001-03-0
mcmc-uk_com---msds-dcryltop-pu-77-base-uk.asp 022-00-9 023-00-4 281-00-4 64742-95-6 025-00-1 195-00-7 345-00-4 2007-06-1
mcmc-uk_com---msds-deroxyglass-560-base.asp 022-00-9 074-00-8 38-43-5 004-00-4 37-66-2 327-00-6 356-00-4
mcmc-uk_com---msds-deroxyglass-560-hard-uk.asp 022-00-9 004-00-6
mcmc-uk_com---msds-diluant-61-161-uks.asp 022-00-9 10-38-2 023-00-4 195-00-7 356-00-4 025-00-5 10-37-5
mcmc-uk_com---msds-diluant-frsl.asp 022-00-9 195-00-7
mcmc-uk_com---msds-diluent-ep-n3.asp 064-00-3 004-00-4 025-00-1
mcmc-uk_com---msds-diluent-n6-deck-line-full-grip.asp 78-93-3
mcmc-uk_com---msds-diluent-pu-n2.asp 010-00-7 195-00-7 064-00-3 025-00-1
mcmc-uk_com---msds-diluent-pu-n4-summer.asp 010-00-7 195-00-7 025-00-1
mcmc-uk_com---msds-diluent-wp-n1.asp 021-00-3 004-00-6 002-00-5 003-00-0
mcmc-uk_com---msds-dm-03.asp 112-24-3 108-95-2 32610-77-8 111-40-0 39423-51-3
mcmc-uk_com---msds-dm-06.asp 1477-55-0 80-05-7
mcmc-uk_com---msds-emp-914-txx.asp 78-93-3
mcmc-uk_com---msds-enguard-px-uk.asp 33-04-6 100-42-5
mcmc-uk_com---msds-ep-140-hardener-uk.asp 022-00-9 004-00-6 069-00-0 160901-21-3
mcmc-uk_com---msds-ep-200-base-uk.asp 055-00-5 90640-84-9 90640-86-1 022-00-9 68410-23-1 025-00-5 043-00-3 64742-95-6 64742-82-1 060-00-0
mcmc-uk_com---msds-ep-211-base-uk.asp 074-00-8 043-00-3 022-00-9 98-82-8 025-00-5 064-00-3
mcmc-uk_com---msds-ep-213-hb-base-uk.asp 022-00-9 023-00-4 043-00-3 25068-38-6 98-82-8 025-00-5 004-00-6
mcmc-uk_com---msds-ep-215-230-fast-durc-uk.asp 022-00-9 68413-28-5 004-00-6 074-00-8 38-43-5 069-00-0 006-00-6 71074-89-0 2007-06-1
mcmc-uk_com---msds-ep-215-230-hardener-uk.asp 022-00-9 004-00-4 37-66-2 004-00-6 064-00-3 2007-06-1
mcmc-uk_com---msds-epodux-61-134-durc-uk.asp 022-00-9 10-38-2 059-00-5 34-43-5 069-00-0
mcmc-uk_com---msds-epoxyguard-455-base-uk.asp 074-00-8 68081-84-5
mcmc-uk_com---msds-epu-221-base-uk.asp 002-00-3 195-00-7 022-00-9 010-00-7 327-00-6
mcmc-uk_com---msds-epz-210-base-uk.asp 25068-38-6 043-00-3 022-00-9 023-00-4 98-82-8 025-00-5 004-00-6 64742-95-6 2007-06-1
mcmc-uk_com---msds-epz-210-hardener-uk.asp 022-00-9 023-00-4 98-82-8 025-00-5 043-00-3 004-00-6 68410-23-1 64742-95-6
mcmc-uk_com---msds-exl-1601.asp 9046-10-0 2855-13-2
mcmc-uk_com---msds-fds-aeroprim-epu-523-base-uk.asp 009-00-4 022-00-9 023-00-4 002-00-3 010-00-7 195-00-7 004-00-4
mcmc-uk_com---msds-fds-aeroxyglass-560-base-uk.asp 022-00-9 023-00-4 11-20-9 004-00-4
mcmc-uk_com---msds-fds-polystria-base-uk.asp 022-00-9 10-38-2 023-00-4 64742-95-6 53-10-3 195-00-7 345-00-4
mcmc-uk_com---msds-fds-polystria-hardener-uk.asp 195-00-7 28182-81-2 011-00-1
mcmc-uk_com---msds-filllite.asp 61132-18-1
mcmc-uk_com---msds-fr1-55-base-uk.asp N/A
mcmc-uk_com---msds-fr1-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-fr2-55-base-uk.asp N/A
mcmc-uk_com---msds-fr2-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-frs-30-base-uk.asp 025-00-1 022-00-9 195-00-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC