Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

61132-18-1

File Name: mcmc-uk_com---msds-filllite.asp
                                                                                                                               Fillite
Version 21/03/01
Page 1/3

HEALTH AND SAFETY INFORMATION according to directive 91 / 155 / EEC

1 - Identification of the product and of the company.

Fillite
Product description :

S I C O M I N Composites
Address :
RN 568 Quartier la Moutte BP 23
13 161 Ch芒teauneuf - les - Martigues Cedex - FRANCE -
Phone: 33.(0)4.42.42.30.20 Fax: 33.(0)4.42.81.29.29 composites@sicomin.com

2 - Composition / Information on the components
Ingredient name CAS number Percentage
Hollow microsph猫res of Alumino Silcate 61132-18-1 100 %
Other name: Cenosph猫res

3 - Identification of Dangers
May cause irritation of eyes, skin and respiratory system

4 - First Aid
Eye Contact:
- Immediately flush eyes with large amounts of water.
- Get immediate medical attention.

Skin Contact:
- No need for first aid is anticipated in the event of skin contact.

Inhalation:
- If signs or symptoms occur, remove person to fresh air. If not breathing, give artificial respiration.
- If breathing is difficult, get immediate medical attention.

Ingestion:
- Do not induce vomiting. Drink two glasses of water. Call a medical doctor.

5 - Fire Prevention Methods
Classed as: Non Flammable

Suitable Extinguishing Media: Does not support combustion. Choose material suitable for surrounding fire.

Hazardous Decomposition:: None known.

Fire-Fighting Procedures: None known.

Special Instructions: None known.

6 - Measures to be taken in case of accidental dispersion
Personal Precautions: Observe precautions from other sections.

Methods for Cleaning up: Ventilate area. Collect spilled material. Place in a suitable metal container.


7 - Handling and Storage
Precautions for Safe Storage: Keep container closed when not in use.

Fire Prevention: Not applicable.
Fillite
Version 21/03/01
Page 2/3


Precautions for Safe Handling: Not applicable.


8 - Individual Protection / Exposure control
Eye Protection: Avoid eye contact. Wear eye protection complying with BS 2092

Hand Protection: Wear chromed cotton gloves.

Skin Protection: Not applicable.

Respiratory Protection: Avoid inhalation of dust. Select one of the following respirators based on airborne
concentration of contaminants and in accordance with national regulations: Use half-mask
dust respirator. Minimum nominal protection factor (NPF) of 10 (BS 4275)

Ingestion: Do not ingest. Keep out of reach of children.

Recommended Ventilation:
- Use in a well-ventilated area. Provide sufficient ventilation to maintain emissions below recommended exposure
limits.
- If exhaust ventilation is not adequate, use appropriate respiratory protection.

Exposure Limits: No data

9 - Physical and Chemical Properties
Appearance and Odour: Powder white, odourless
Color: Grey
pH: 6 - 8 in 50% solids concentration
Boiling point/boiling range: Not applicable
Melting point/melting range: 1200 - 1300 掳C
Flash point: Not applicable
Autoflammability: Not determined
Vapour pressure: Not applicable
Water Solubility: Negligible
Specific gravity: 0.6 - 0.8 g/cc
Vapour density: Not applicable
Volatile organic compounds: Not determined
Evaporation rate: Not applicable
Viscosity: Not applicable
Percent volatile:- Not applicable.

10 - Stability and Reactivity
Materials to Avoid:: None known.

Hazardous Decomposition: Stable. Hazardous polymerisation will not occur.
-
11 - Toxicity information
Effects from Eye Contact:
- Mechanical eye irritation: signs/symptoms can include irritation, redness, scratching of the cornea and tearing.

Effects from Skin Contact: Product is not expected to be irritating to the skin.

Effects from Inhalation: Upper respiratory irritation: signs/symptoms can include soreness of the nose and
throat, coughing and sneezing.
Fillite
Version 21/03/01
Page 3/3

Effects from Ingestion: Swallowing a relatively large amount of this material is unlikely to produce serious
illness or death.

12 - Ecological Information
Other Effects and Information: Environmentally benign


13 Disposal considerations
Potential for Recycling: Reclaim if feasible.

Special Instructions:
- Dispose of waste product in a landfill/waste disposal site.
- Since regulations vary, consult applicable regulations or authorities before disposal

14 - Transportation Information
UN number: Not restricted for transportation.

UK ROAD/SEA FREIGHT (IMO) CLASSIFICATION:
- Substance Identification Number: Not applicable
- Class: Not applicable
- Packing Group: Not applicable
- Proper Shipping Name: Not applicable

ADR/RID CLASSIFICATION:
- Class: Not applicable

ICAO/IATA CLASSIFICATION:
- Class: Not applicable
- Sub-Risk: Not applicable
- Packing Group: Not applicable
- Proper Shipping Name: Not applicable

15 - Information on Regulations
Symbol(s): None

Risk Phrases:
May cause irritation of eyes, skin and respiratory system.

Safety Phrases:
Do not breathe dust. In case of insufficient ventilation, wear suitable respiratory equipment.
Avoid eye and skin contact with dusts. In case of contact with eyes, rinse immediately with plenty of water
and seek medical advice.
After contact with skin, wash immediately with plenty of soap and water.
If inhaled, provide fresh air.

16 - Additional Information
This document of safety information has been created according to directive 91 / 155 / EEC ( Technical Directives
for Safety ) and 88 / 379 / EEC ( Directives for General Preparation )

Origin : R & D - CLM JPG Laboratory
File : W / SEC UK Fillite

This document completes but does not replace the technical utilization papers . The information provided is based on our relative
knowledge of the product in question at the date indicated above . It is given in good faith . The user is warned of the risks incurred by
putting the product to any use other than for which it was conceived . It is the users responsibility to know and apply the content of these
texts to his work and to take the necessary precautions in the product's application.
Fillite
Version 21/03/01
Page 4/3

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
lotioncrafter_com---msds_olivem800.asp 226708-41-4
lotioncrafter_com---msds_olivem900.asp 223706-40-9
lotioncrafter_com---msds_oliwaxlc.asp 540-10-3
lotioncrafter_com---msds_pepha_protect.asp 41-61-7 41-61-3 90244-99-8 56-81-5 7732-18-5
lotioncrafter_com---msds_prolipid141.asp 31566-31-1
lotioncrafter_com---msds_regu_age.asp 41-61-7 41-61-3 94350-05-7 9010-10-0 8013-01-2
lotioncrafter_com---msds_syn_tacks.asp N/A
lotioncrafter_com---msds_venuceane.asp 34-84-1
mcmc-uk_com---msds-320360-hardener-uk.asp 021-00-3 022-00-9 023-00-4 022-00-5 195-00-7 011-00-1 025-00-1 012-00-7 2007-06-1
mcmc-uk_com---msds-armstrim-feltrex-uk.asp N/A
mcmc-uk_com---msds-biotank-hardener-uk.asp 006-00-6
mcmc-uk_com---msds-clear-varnish-matt-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-clear-varnish-semi-gloss-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-cotech-e-glass.asp 2001-03-0
mcmc-uk_com---msds-dcryltop-pu-77-base-uk.asp 022-00-9 023-00-4 281-00-4 64742-95-6 025-00-1 195-00-7 345-00-4 2007-06-1
mcmc-uk_com---msds-deroxyglass-560-base.asp 022-00-9 074-00-8 38-43-5 004-00-4 37-66-2 327-00-6 356-00-4
mcmc-uk_com---msds-deroxyglass-560-hard-uk.asp 022-00-9 004-00-6
mcmc-uk_com---msds-diluant-61-161-uks.asp 022-00-9 10-38-2 023-00-4 195-00-7 356-00-4 025-00-5 10-37-5
mcmc-uk_com---msds-diluant-frsl.asp 022-00-9 195-00-7
mcmc-uk_com---msds-diluent-ep-n3.asp 064-00-3 004-00-4 025-00-1
mcmc-uk_com---msds-diluent-n6-deck-line-full-grip.asp 78-93-3
mcmc-uk_com---msds-diluent-pu-n2.asp 010-00-7 195-00-7 064-00-3 025-00-1
mcmc-uk_com---msds-diluent-pu-n4-summer.asp 010-00-7 195-00-7 025-00-1
mcmc-uk_com---msds-diluent-wp-n1.asp 021-00-3 004-00-6 002-00-5 003-00-0
mcmc-uk_com---msds-dm-03.asp 112-24-3 108-95-2 32610-77-8 111-40-0 39423-51-3
mcmc-uk_com---msds-dm-06.asp 1477-55-0 80-05-7
mcmc-uk_com---msds-emp-914-txx.asp 78-93-3
mcmc-uk_com---msds-enguard-px-uk.asp 33-04-6 100-42-5
mcmc-uk_com---msds-ep-140-hardener-uk.asp 022-00-9 004-00-6 069-00-0 160901-21-3
mcmc-uk_com---msds-ep-200-base-uk.asp 055-00-5 90640-84-9 90640-86-1 022-00-9 68410-23-1 025-00-5 043-00-3 64742-95-6 64742-82-1 060-00-0
mcmc-uk_com---msds-ep-211-base-uk.asp 074-00-8 043-00-3 022-00-9 98-82-8 025-00-5 064-00-3
mcmc-uk_com---msds-ep-213-hb-base-uk.asp 022-00-9 023-00-4 043-00-3 25068-38-6 98-82-8 025-00-5 004-00-6
mcmc-uk_com---msds-ep-215-230-fast-durc-uk.asp 022-00-9 68413-28-5 004-00-6 074-00-8 38-43-5 069-00-0 006-00-6 71074-89-0 2007-06-1
mcmc-uk_com---msds-ep-215-230-hardener-uk.asp 022-00-9 004-00-4 37-66-2 004-00-6 064-00-3 2007-06-1
mcmc-uk_com---msds-epodux-61-134-durc-uk.asp 022-00-9 10-38-2 059-00-5 34-43-5 069-00-0
mcmc-uk_com---msds-epoxyguard-455-base-uk.asp 074-00-8 68081-84-5
mcmc-uk_com---msds-epu-221-base-uk.asp 002-00-3 195-00-7 022-00-9 010-00-7 327-00-6
mcmc-uk_com---msds-epz-210-base-uk.asp 25068-38-6 043-00-3 022-00-9 023-00-4 98-82-8 025-00-5 004-00-6 64742-95-6 2007-06-1
mcmc-uk_com---msds-epz-210-hardener-uk.asp 022-00-9 023-00-4 98-82-8 025-00-5 043-00-3 004-00-6 68410-23-1 64742-95-6
mcmc-uk_com---msds-exl-1601.asp 9046-10-0 2855-13-2
mcmc-uk_com---msds-fds-aeroprim-epu-523-base-uk.asp 009-00-4 022-00-9 023-00-4 002-00-3 010-00-7 195-00-7 004-00-4
mcmc-uk_com---msds-fds-aeroxyglass-560-base-uk.asp 022-00-9 023-00-4 11-20-9 004-00-4
mcmc-uk_com---msds-fds-polystria-base-uk.asp 022-00-9 10-38-2 023-00-4 64742-95-6 53-10-3 195-00-7 345-00-4
mcmc-uk_com---msds-fds-polystria-hardener-uk.asp 195-00-7 28182-81-2 011-00-1
mcmc-uk_com---msds-filllite.asp 61132-18-1
mcmc-uk_com---msds-fr1-55-base-uk.asp N/A
mcmc-uk_com---msds-fr1-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-fr2-55-base-uk.asp N/A
mcmc-uk_com---msds-fr2-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-frs-30-base-uk.asp 025-00-1 022-00-9 195-00-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC