Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

195-00-7
28182-81-2
011-00-1

File Name: mcmc-uk_com---msds-fds-polystria-hardener-uk.asp
                                                                            Safety data sheet Polystria hardener Page 1/5
Version 17/07/02



SAFETY DATA SHEET Polystria Hardener
1 - IDENTIFICATION OF PREPARATION AND COMPANY/BUSINESS

Preparation:
Name: POLYSTRIA Hardener.
Product code: H1995D.
Company/business:
Registered company name: SICOMIN
Address: RN 568 - BP23 鈥? 13161 Ch芒teauneuf-les-Martigues - FRANCE
Telephone: +33 (0)4.42.42.30.20 Fax: +33 (0)4.42.81.29.29
E.mail: composites@sicomin.com
Emergency telephone No.: 01 45 42 59 59.
Association/Organisation: ORFILA.

2 - INFORMATION REGARDING CONSTITUENTS

Hazardous substances present on their own.
脴(present in the preparation at a sufficient concentration to give it the toxicological characteristics it
would have in a 100% pure state)
脴607-195-00-7 Cas 108-65-6 EEC 203-603-9 2-METHOXY-1-METHYLETHYL ACETATE
Concentration >=25.00% and <50.00%. Symbol: Xi R: 10-36
脴M00125 Cas 28182-81-2 POLYISOCYANATE ALIPHATIQUE Concentration >=50.00% and
<100.00%. Symbol: Xi R: 43
Other substances representing a hazard:
脴No known substance in this category present.
Substances present at a concentration below the minimum danger threshold.
脴615-011-00-1 Cas 822-06-0 EEC 212-485-8 HEXAMETHYLENE-DI-ISOCYANATE Concentration
>=0.00% and <2.50%. Symbol: T R: 23-36/37/38-42/43
Other substances with occupational exposure limits.
脴No known substance in this category present.

3 - IDENTIFICATION OF HAZARDS

脴This product is classed: Flammable.
脴Possibility of irritation to the eyes.
脴Possibility of skin sensitisation. The preparation may also irritate the skin and prolonged contact may
aggravate this effect.

4 - FIRST AID.

脴As a general rule, in case of doubt or if symptoms persist, always call a doctor.
脴NEVER induce swallowing in an unconscious person.
In the event of exposure by inhalation.
脴If a large quantity is inhaled, move the patient into the fresh air and keep him/her warm and still.
In the event of splashes or contact with eyes.
脴Wash thoroughly with soft, clean water for 15 minutes holding the eyelids open.
脴Refer the patient to an ophthalmologist, in particular if there is any redness, pain or visual impairment.
脴Regardless of the initial state, refer the patient to an ophthalmologist and show him the label.
In the event of splashes or contact with skin.
脴Remove contaminated clothing and wash the skin thoroughly with soap and water or a recognised
cleaner.
脴DO NOT use solvents or thinners.
In the event of swallowing.
脴In the event of swallowing, if the quantity is small (no more than one mouthful), rinse the mouth with
water and consult a doctor.
脴Call a doctor immediately and show him the label.
N/A !

5 - FIRE-FIGHTING MEASURES

脴Chemical powders, carbon dioxide and other extinguishing gas are suitable for small fires.
In the event of fire, the recommended extinguishing agents are:
脴Carbon dioxide, chemical powders, foams, and other extinguishing gases.
脴In the event of fire, use specifically suitable extinguishing agents. Never use water.
Safety data sheet Polystria hardener Page 2/5
Version 17/07/02



Extinguishing agents not to be used
脴Water is not generally recommended since it can be ineffective; however, it can be used successfully
to cool containers exposed to the fire and to disperse fumes.
脴A fire will often produce a thick black smoke. Exposure to decomposition products may be hazardous
to health.
脴Do not breathe in smoke.
脴Prevent the effluent of fire-fighting measures from entering drains or waterways.
Special equipment for fire-fighting personnel.
脴Fire-fighting personnel are to be equipped with autonomous insulating breathing apparatus.

6 - MEASURES TO BE TAKEN IN THE EVENT OF ACCIDENTAL SPILLAGE

Safety precautions:
脴Eliminate any possible source of ignition and ventilate the premises.
脴On account of the organic solvents contained in the preparation, eliminate sources of ignition and
ventilate the premises.
脴Avoid inhaling the fumes.
脴Avoid any contact with the skin and eyes.
脴Consult the safety measures listed under headings 7 and 8.
Environmental safety precautions:
脴Contain and control the leaks or spills with non-combustible absorbent materials such as sand, earth,
vermiculite, diatom earth in drums for waste disposal.
脴Prevent any material from entering drains or waterways.
脴Use drums to dispose of waste recovered in accordance with applicable regulations (see heading 13).
脴If the product contaminates waterways, rivers or drains, alert the relevant authorities in accordance
with statutory procedures
Cleaning methods:
脴Clean preferably with a detergent, do not use solvents.
脴Contaminated areas must be cleaned very quickly.
脴A possible decontaminant for flammable products may be: (expressed by volume) water (45 parts),
ethanol or isopropanol (50 parts), concentrated ammonia (d-0.880) (5 parts). For non-flammable
products: sodium carbonate (5 parts), water (95 parts).
脴These residues must be stored for disposal in accordance with applicable regulations (see 13).

7 - HANDLING AND STORAGE

脴The regulations relating to storage premises apply to workshops where the product is handled.
脴Anyone with a history of skin sensitisation must on no account handle such products
Handling:
脴Handle in well-ventilated areas.
脴The fumes are denser than air. They can spread along the ground and form explosive mixtures with air
脴Prevent the formation of flammable or explosive concentrations in air and avoid vapour concentrations
higher than the occupational exposure limits.
Fire prevention:
脴Prevent the accumulation of electrostatic charges with connections to earth
脴The preparation may become electrostatically charged; always place on the ground during transfer.
Wear antistatic shoes and clothes and make floors of conductive materials.
脴Use the product in premises where there are no naked flames or other sources of ignition and have
protected electrical equipment
脴Keep packages tightly closed and away from sources of heat, sparks and naked flames.
脴Do not use tools which may produce sparks. Do not smoke.
脴Prevent access by unauthorised personnel.
Recommended equipment and procedures
脴For personal safety, see 搂8.
脴Observe precautions stated on label and also industrial safety regulations
脴Avoid inhaling solvent fumes and spray-gun aerosols
脴Packages which have been opened must be reclosed carefully and stored in an upright position
脴Avoid inhaling fumes.
脴Where the personnel must carry out work in a booth, whether for spraying or otherwise, the ventilation
may be inadequate to control particles and solvent fumes in every case.
脴It is therefore recommended that personnel wear masks with a compressed air supply during spraying
operations until the concentration of particles and solvent fumes has fallen below the exposure limits.
脴Avoid contact of product with the skin and eyes
Prohibited equipment and procedures.
脴Smoking, eating and drinking are prohibited in premises where the preparation is used
Safety data sheet Polystria hardener Page 3/5
Version 17/07/02


脴Never open the packages under pressure

Storage.
脴Keep the container tightly closed in a dry place.
脴Keep away from all sources of ignition - do not smoke.
脴Keep well away from all sources of ignition, heat and direct sunlight
脴The floor must be impermeable and form a collecting basin so that, in the event of an accidental
spillage, the liquid cannot spread beyond this area.

8 - EXPOSURE CONTROL - PERSONAL SAFETY

脴Anyone with a history of skin sensitisation, asthma, allergies, chronic or periodic respiratory problems
must on no account use these preparations
Technical measures.
脴Ensure adequate ventilation, if possible with extractor fans at work posts and appropriate general
extraction.
脴If this ventilation is insufficient to maintain the concentration of solvent fumes below the exposure
limits, wear breathing apparatus
Exposure limits per INRS ND 2098-174-99 and ND 2114-176-99:
France VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes: TMP N掳:
607-195-00-7 - - - - - -
615-011-00-1 0.01 0.075 0.02 0.15 AR 62
Germany Class: MAK-ppm: MAK-mg/m3: Notes: Notes:
607-195-00-7 I 50 270 C
615-011-00-1 I 0.005 0.035 Sens
ACGIH(TLV) TWA-ppm: TWA-mg/m3: STEL-ppm: STEL-mg/m3: Notes: Notes:
607-195-00-7 - - - - - -
615-011-00-1 0.005 0.034 - - - -

Exposure limits per 2000/39/EC and 98/24/EC:
VME-ppm: VME-mg/m3: VLE-ppm: VLE-mg/m3: Notes:
607-195-00-7 50 275 100 550 Peau

Safety breathing apparatus:
脴Where workers encounter concentrations higher than the exposure limits, they must wear suitable,
approved masks.
Hand protection.
脴Protective creams may be used for exposed skin, but they should not be applied after contact with the
product.
脴Protective creams may be used for exposed skin, but they should not be applied after contact with the
product.
脴Due to the solvents present, it is recommended that polyvinyl alcohol or nitrile rubber gloves be worn.
Eye and face protection.
脴Avoid contact with eyes.
脴Wear safety goggles.
脴Provide eye washes in workshops where the product is constantly handled
Skin protection.
脴Wear antistatic clothing made of natural fibre or synthetic fibre resistant to high temperatures.
脴After contact with the product, any contaminated part of the body shall be washed
脴For further information, see 搂 11 of S.D.S. - Toxicological information.

9 - PHYSICAL PROPERTIES

Density: >1
Acid/base character of preparation: neutral
Solubility of preparation in water: Insoluble.
Vapour tension at 50掳C of volatile constituents: Below 110 kPa (1.10 bar)
Physical state: viscous liquid
Flash point interval: 23掳C. < Flash point: <= 55掳C.
When a pH measure is possible, it has a value of: not stated.
Self-ignition temperature: not specified.
Decomposition temperature: not specified.
Melting temperature interval: not specified.
Average distillation temperature of solvents contained: not specified.
Safety data sheet Polystria hardener Page 4/5
Version 17/07/02




10 - STABILITY AND REACTIVITY

脴When exposed to high temperatures, the preparation may release dangerous decomposition products
such as carbon monoxide and dioxide, smoke and nitrogen oxide It may also release hydrogen cyanide,
amines and alcohols.
脴Keep away from oxidising agents and strongly acidic or basic materials to avoid exothermic reactions
脴Exothermic reactions occur with amines and alcohols. The preparations react slowly with water and
give off carbonic gas which may produce pressure increases in closed packages

11 - TOXICOLOGICAL INFORMATION

脴No data is available regarding the preparation itself.
脴Exposure to fumes from solvents contained in the preparation beyond the exposure limits stated may
produce effects harmful to health, such as:
脴Irritation of mucous membrane and respiratory system, kidneys, liver and central nervous system.
脴Symptoms produced will include headaches, numbness, dizziness, fatigue, muscular asthenia and, in
extreme cases, loss of consciousness.
脴Prolonged or repeated contact with the preparation may strip the skin of its natural oil and thus cause
non-allergic dermatitis on contact and absorption through the epidermis.
脴Splashes in the eyes may cause irritation and reversible damage
脴It is generally agreed that substances contained are likely to cause, when applied to the eye of an
animal, the appearance of major lesions which persist for at least twenty-four hours
脴It is generally agreed that substances contained are likely to cause, among certain predisposed
subjects, a sensitisation reaction by cutaneous route
脴Based on the properties of isocyanates and taking into account toxicological data for similar
preparations, this preparation may cause irritation and/or sensitisation of the respiratory system.
脴It may also lead to asthma, respiratory problems and angina
脴Those susceptible may display asthmatic symptoms when exposed to atmospheres with an isocyanate
concentration well below those of the VLE: exposure limits.
脴Repeated exposure may cause permanent respiratory problems.

12 - ECOLOGICAL INFORMATION

脴No ecological data on the product itself is available.
脴The product must not be allowed to run into drains or waterways.

13 - DISPOSAL CONSIDERATIONS

脴Do not pour into drains or waterways.

14 - TRANSPORT INFORMATION

脴Transport product in compliance with provisions of the ADR for road, RID for rail, IMDG for sea and
ICAO/IATA for air transport
脴UN 1263 = Paint flammable (including lacquer, enamel, stain, shellac, varnish, polish and related
material).
ADR/RID Class Number Code Identif. Label
Not subject to this
regulation (Q<450L).
Transport following
Nota E of the 2301
marginal
3 31掳 C 30 1263 3
IMDG Page N掳ONU Class Number 2掳Label Identif. N掳GSMU
1263 3.3 III - 3-05 310,313

The page number 3372 should not appear anymore on the Dangerous Goods Declaration
(Amendment 28-96).
IATA N掳ONU Class 2掳Label Number Passenger Passenger Freighter Freighter nota
1263 3 - III 309 60 L 310 220 L A72
1263 3 - III Y309 10 L - - -

15 - STATUTORY INFORMATION
Safety data sheet Polystria hardener Page 5/5
Version 17/07/02



脴This preparation was classified in compliance with the directive known as
1999/45/EC and its adaptations
脴In addition directive 2001/59/EC with the 28掳 adaptation of directive 67/548/EC (Hazardous
substances) have been taken into account.
脴Contains compounds with an isocyanate base - refer to the information supplied by the manufacturer.
This information is found on this safety data sheet
Preparation classification.




Irritant Flammable
Contains:
脴607-195-00-7 2-METHOXY-1-METHYLETHYL ACETATE
脴M00125 POLYISOCYANATE ALIPHATIQUE
Particular hazards associated with the preparation and safety recommendations:
脴R 43 May cause sensitization by skin contact.
脴R 36 Irritating to eyes.
脴R 10 Flammable.
脴Contains isocyanates. See information supplied bythe manufacturer.
脴S 23 Do not breathe vapour.
脴S 24 Avoid contact with skin.
脴S 37 Wear suitable gloves.
脴S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
脴S 60 This material and/or its container must be disposed of as hazardous waste.

16 - OTHER INFORMATION

脴Since the user's working conditions are not known by us, the information supplied on this safety data
sheet is based on our current level of knowledge and on national and community regulations.
脴The product must not be used for any purposes other than those specified under heading 1 without first
obtaining written handling instructions.
脴It is at all times the responsibility of the user to take all necessary measures to comply with legal
requirements and local regulations.
脴The information given on this safety data sheet must be regarded as a description of the safety
requirements relating to our product and not a guarantee of its properties




Conform茅ment 脿 licence d'exploitation de la proc茅dure InfoDyne toute revente de cette FDS 脿 un tiers est interdite -(漏)
InfoDyne 2001

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
lotioncrafter_com---msds_olivem800.asp 226708-41-4
lotioncrafter_com---msds_olivem900.asp 223706-40-9
lotioncrafter_com---msds_oliwaxlc.asp 540-10-3
lotioncrafter_com---msds_pepha_protect.asp 41-61-7 41-61-3 90244-99-8 56-81-5 7732-18-5
lotioncrafter_com---msds_prolipid141.asp 31566-31-1
lotioncrafter_com---msds_regu_age.asp 41-61-7 41-61-3 94350-05-7 9010-10-0 8013-01-2
lotioncrafter_com---msds_syn_tacks.asp N/A
lotioncrafter_com---msds_venuceane.asp 34-84-1
mcmc-uk_com---msds-320360-hardener-uk.asp 021-00-3 022-00-9 023-00-4 022-00-5 195-00-7 011-00-1 025-00-1 012-00-7 2007-06-1
mcmc-uk_com---msds-armstrim-feltrex-uk.asp N/A
mcmc-uk_com---msds-biotank-hardener-uk.asp 006-00-6
mcmc-uk_com---msds-clear-varnish-matt-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-clear-varnish-semi-gloss-uk.asp 001-00-6 64742-48-9 68409-81-4
mcmc-uk_com---msds-cotech-e-glass.asp 2001-03-0
mcmc-uk_com---msds-dcryltop-pu-77-base-uk.asp 022-00-9 023-00-4 281-00-4 64742-95-6 025-00-1 195-00-7 345-00-4 2007-06-1
mcmc-uk_com---msds-deroxyglass-560-base.asp 022-00-9 074-00-8 38-43-5 004-00-4 37-66-2 327-00-6 356-00-4
mcmc-uk_com---msds-deroxyglass-560-hard-uk.asp 022-00-9 004-00-6
mcmc-uk_com---msds-diluant-61-161-uks.asp 022-00-9 10-38-2 023-00-4 195-00-7 356-00-4 025-00-5 10-37-5
mcmc-uk_com---msds-diluant-frsl.asp 022-00-9 195-00-7
mcmc-uk_com---msds-diluent-ep-n3.asp 064-00-3 004-00-4 025-00-1
mcmc-uk_com---msds-diluent-n6-deck-line-full-grip.asp 78-93-3
mcmc-uk_com---msds-diluent-pu-n2.asp 010-00-7 195-00-7 064-00-3 025-00-1
mcmc-uk_com---msds-diluent-pu-n4-summer.asp 010-00-7 195-00-7 025-00-1
mcmc-uk_com---msds-diluent-wp-n1.asp 021-00-3 004-00-6 002-00-5 003-00-0
mcmc-uk_com---msds-dm-03.asp 112-24-3 108-95-2 32610-77-8 111-40-0 39423-51-3
mcmc-uk_com---msds-dm-06.asp 1477-55-0 80-05-7
mcmc-uk_com---msds-emp-914-txx.asp 78-93-3
mcmc-uk_com---msds-enguard-px-uk.asp 33-04-6 100-42-5
mcmc-uk_com---msds-ep-140-hardener-uk.asp 022-00-9 004-00-6 069-00-0 160901-21-3
mcmc-uk_com---msds-ep-200-base-uk.asp 055-00-5 90640-84-9 90640-86-1 022-00-9 68410-23-1 025-00-5 043-00-3 64742-95-6 64742-82-1 060-00-0
mcmc-uk_com---msds-ep-211-base-uk.asp 074-00-8 043-00-3 022-00-9 98-82-8 025-00-5 064-00-3
mcmc-uk_com---msds-ep-213-hb-base-uk.asp 022-00-9 023-00-4 043-00-3 25068-38-6 98-82-8 025-00-5 004-00-6
mcmc-uk_com---msds-ep-215-230-fast-durc-uk.asp 022-00-9 68413-28-5 004-00-6 074-00-8 38-43-5 069-00-0 006-00-6 71074-89-0 2007-06-1
mcmc-uk_com---msds-ep-215-230-hardener-uk.asp 022-00-9 004-00-4 37-66-2 004-00-6 064-00-3 2007-06-1
mcmc-uk_com---msds-epodux-61-134-durc-uk.asp 022-00-9 10-38-2 059-00-5 34-43-5 069-00-0
mcmc-uk_com---msds-epoxyguard-455-base-uk.asp 074-00-8 68081-84-5
mcmc-uk_com---msds-epu-221-base-uk.asp 002-00-3 195-00-7 022-00-9 010-00-7 327-00-6
mcmc-uk_com---msds-epz-210-base-uk.asp 25068-38-6 043-00-3 022-00-9 023-00-4 98-82-8 025-00-5 004-00-6 64742-95-6 2007-06-1
mcmc-uk_com---msds-epz-210-hardener-uk.asp 022-00-9 023-00-4 98-82-8 025-00-5 043-00-3 004-00-6 68410-23-1 64742-95-6
mcmc-uk_com---msds-exl-1601.asp 9046-10-0 2855-13-2
mcmc-uk_com---msds-fds-aeroprim-epu-523-base-uk.asp 009-00-4 022-00-9 023-00-4 002-00-3 010-00-7 195-00-7 004-00-4
mcmc-uk_com---msds-fds-aeroxyglass-560-base-uk.asp 022-00-9 023-00-4 11-20-9 004-00-4
mcmc-uk_com---msds-fds-polystria-base-uk.asp 022-00-9 10-38-2 023-00-4 64742-95-6 53-10-3 195-00-7 345-00-4
mcmc-uk_com---msds-fds-polystria-hardener-uk.asp 195-00-7 28182-81-2 011-00-1
mcmc-uk_com---msds-filllite.asp 61132-18-1
mcmc-uk_com---msds-fr1-55-base-uk.asp N/A
mcmc-uk_com---msds-fr1-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-fr2-55-base-uk.asp N/A
mcmc-uk_com---msds-fr2-55-hardener-uk.asp 822-06-0
mcmc-uk_com---msds-frs-30-base-uk.asp 025-00-1 022-00-9 195-00-7

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC