LEPTO-ERYVAC鈩? VACCINE
Material Safety Data Sheet 6521-56
Date of Issue: Tue 27-June-2000
------------------------------------------------------------------------------------------------------------------------------------------------
IDENTIFICATION
------------------------------------------------------------------------------------------------------------------------------------------------
STATEMENT OF HAZARDOUS NATURE
Not classified as hazardous according to Worksafe Australia criteria
SUPPLIER
Company: CSL Limited (Animal Health Division)
(ABN 99 051 588 348)
Address: 45 Poplar Road
Parkville, Victoria 3052 Australia
Telephone: 1800 333 011
Emergency Tel: (03) 9389 1984
Fax: (03) 9389 1646
Product Name: Lepto-Eryvac鈩? for Pigs
Other Names: Combined Leptospirosis-Erysipelas Vaccine for Pigs, Inactivated
Product Code: 0709
CAS RN No(s): None
UN Number: None
Dangerous Goods Class: None
Subsidiary Risk: None
Hazchem Code: None
Poisons Schedule Number: NZS2
USE
For the prevention of leptospirosis and erysipelas in pigs
PHYSICAL DESCRIPTION/PROPERTIES
Appearance: Aqueous liquid suspension
Boiling Point (deg C): 100
Melting Point (deg C): 0
Vapour Pressure (kPa): 3.19 @25C
Specific Gravity: 1.01
Flash Point (deg C): Not applicable
Lower Explosive Limit (%): Not applicable
Upper Explosive Limit (%): Not applicable
Solubility in Water (g/L): Miscible
INGREDIENTS
Name CAS RN %
Saline suspension >60
Containing formol cultures of,
Erysipelas rhusiopathiae
Leptospira interrogans serovar pomona
Leptospira interrogans serovar tarassovi
(sufficient to satisfy the potency test requirements of BP (Vet) 1997 and/or sufficient to protect)
Adjuvant <0.5
Preservative 54-64-8 0.01
------------------------------------------------------------------------------------------------------------------------------------------------
HEALTH HAZARD
------------------------------------------------------------------------------------------------------------------------------------------------
ACUTE HEALTH EFFECTS
Swallowed: Considered an unlikely route of entry in commercial/industrial environments. This
material is non-toxic but may be harmful if swallowed in large quantity.
Eye: This material may be mildly discomforting to the eyes (due to preservative used).
Skin: This material may be mildly discomforting to the skin and may cause allergy if
exposure is prolonged.
Local injection site reaction in humans may occur from accidental injection through
the skin (needle stick injury), due to adjuvant used.
Inhaled: Not normally a hazard due to non-volatile nature of the product. The spray mist may
be discomforting to the upper respiratory tract and lungs, and repeated exposure
may cause sensitisation and/or allergic/asthma-like response.
CHRONIC HEALTH EFFECTS
Principal routes of exposure are by skin contact, accidental injection (needle stick injury), ingestion and/or
inhalation of syringe expressed aerosols. As with any chemical product, contact with unprotected bare skin;
inhalation of vapour, mist or dust in the work place atmosphere; or ingestion in any form, should be avoided
by observing good occupational work practice. Inactivated cultures and toxoids are not regarded as
pathogenic in humans.
FIRST AID
Swallowed: Rinse mouth out with plenty of water. If irritation or discomfort persists seek medical
attention.
Eye: If this product comes in contact with the eyes:
1: Immediately hold the eyes open and wash with fresh running water.
2: Ensure complete irrigation of the eye by keeping eyelids apart and away from eye
and moving the eyelids by occasionally lifting the upper and lower lids.
3: If pain persists or recurs seek medical attention.
4: Removal of contact lenses after an eye injury should only be undertaken by
skilled personnel.
Skin: Immediately wipe off with absorbent tissue or towel. Wash affected areas with water
for at least 15 minutes.
Inhaled: No recommendation required.
Advice to Doctor: Treat symptomatically. Adjuvant and/or preservative may produce eye or skin
discomfort.
------------------------------------------------------------------------------------------------------------------------------------------------
PRECAUTIONS FOR USE
------------------------------------------------------------------------------------------------------------------------------------------------
EXPOSURE STANDARDS
No exposure limits set by NOHSC or ACGIH.
ENGINEERING CONTROLS
None under normal operating conditions.
PERSONAL PROTECTION
When handling small quantities of the material, eye protection may not be required.
For bulk handling or where regular exposure in an occupational setting occurs without proper
containment equipment-system:
Chemical goggles
Face shield
No special equipment needed when handling small quantities. Otherwise, for potentially moderate
exposures:
Wear general protective gloves, eg. light weight nitrile gloves
For potentially heavy exposures:
Wear chemical protective gloves, eg. nitrile, and safety footwear
OTHER
No special equipment needed when handling small quantities.
Otherwise:
1. Overalls
2. Barrier cream
3. Eyewash unit
The local concentration of material, quantity and conditions of use determine the type of personal protective
equipment required. For further information, consult your Occupational Health and Safety Advisor.
------------------------------------------------------------------------------------------------------------------------------------------------
SAFE HANDLING
------------------------------------------------------------------------------------------------------------------------------------------------
STORAGE AND TRANSPORT
Suitable Container: Check that containers are clearly labelled.
Packaging as recommended by manufacturer.
Storage Incompatibility: Avoid contamination of water, foodstuffs, feed or seed.
Storage Requirement: Store at 2-8 deg.C (refrigerate). Do not freeze. Protect from light.
1. Store in original containers.
2. Keep containers securely sealed.
3. Store in a cool, dry, well-ventilated area.
4. Store away from incompatible materials and foodstuff containers.
5. Protect containers against physical damage and check regularly for
leaks.
6. Observe manufacturer鈥檚 storage and handling recommendations.
Transportation: No restrictions. Keep at 2-8 deg.C in transit.
SPILLS AND DISPOSAL
Minor Spills: 1. Clean up all spills immediately.
2. Avoid contact with skin and eyes.
3. Wear impervious gloves and safety glasses.
4. Place spilled material in clean, dry, sealable, labelled container. Wash
spill area with large quantities of water.
Major Spills: Not applicable.
Disposal: 1. Dilute with water and flush to sewer.
2. Decontaminate empty containers with water.
3. Recycle containers if possible, or dispose of in authorised landfill. Used
needles should immediately be placed in a designated and appropriately
labelled "sharps" container.
May be disposed of in accordance with any label recommendations
provided by the manufacturer.
FIRE/EXPLOSION HAZARD
1. Non combustible.
2. Not considered to be a significant fire risk, however containers may burn.
------------------------------------------------------------------------------------------------------------------------------------------------
CONTACT POINT
------------------------------------------------------------------------------------------------------------------------------------------------
CONTACT
AUSTRALIAN POISONS INFORMATION CENTRE
24 HOUR SERVICE: 13 11 26
POLICE OR FIRE BRIGADE: 000 (Exchange): 1100
NEW ZEALAND POISONS INFORMATION CENTRE
Dunedin (03) 479 1200 (Normal Hours)
(03) 474 0999 (Emergency)
DISCLAIMER:
CSL believes the information, data and recommendations contained in this MSDS to be accurate as at the
date hereof. CSL reserves the right to update this MSDS as appropriate. CSL makes no other
representation or warranty (expressed or implied) with respect to this MSDS and the product itself, including
without limitation any warranty as to completeness, merchantability or fitness for a particular purpose.
Under no circumstances shall CSL be liable for indirect, special, consequential or punitive damages.
|