MSDS Material Safety Data Sheet
UNITEX
PRO-FLEX
MSDS Number: 1016 Revision Date: 8/12/2008
1 of 5
Page
1 PRODUCT AND COMPANY IDENTIFICATION
Manufacturer
UNITEX
3101 Gardner Ave.
Kansas City, MO 64120
Contact: Technical Services
Telephone Number: 816-231-7700
FAX Number: 816-483-3149
E-Mail: mail@unitex-chemicals.com
Web www.unitex-chemicals.com
Product Name: PRO-FLEX
Revision Date: 8/12/2008
MSDS Number: 1016
Common Name: polyamine
Product Code: PRO-FLEX
Chemical Family: polyamine
Synonyms: Amines Liquid Corrosive
Emergency Telephone No.: CHEMTREC 1-800-424-9300 24 Hrs.
2 HAZARDS IDENTIFICATION
Route of Entry: Eyes, Skin, Swallowing, Inhalation
Target Organs: None known.
Inhalation: May cause irritation to nose and throat.
Skin Contact: May cause irritation and dermatitis.
Eye Contact: May cause irritation, sensitization and may lead to eye damage.
Ingestion: May cause irritation of the mouth, stomach and sensitization.
OSHA PEL ACGUH TLV
COMPONENT A
25068386 NE NE
14807966 5 mg/m3 5 mg/m3
1317653 5 mg/m3 5 mg/m3
2461156 5 mg/m3 5 mg/m3
110883 NE NE
COMPONENT B
694837 NE NE
143237 NE NE
140318 NE NE
100516 NE NE
NE NE NE
84852153 10 mg/m3 5 mg/m3
None of the remaining components are considered a hazardous material or carcinogen (1910.1200 Hazard Communication (d) 4).
MSDS Material Safety Data Sheet
UNITEX
PRO-FLEX
MSDS Number: 1016 Revision Date: 8/12/2008
2 of 5
Page
3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients:
Cas # Chemical Name Perc.
----------------------------------------------------------------
COMPONENT A
Base Epoxy Resin
25068386 | Modified Bisphenol A | >80%
14807966 | Talc | <10%
1317653 | Coated Precipitated Calcium Carbonate | <10%
2461156 | | <10%
110883 | | <10%
COMPONENT B
Trade Secret Amine Blend containing one or more of the following:
694837 | | <95%
143237 | |
140318 | |
100516 | |
84852153 | | <5%
4 FIRST AID MEASURES
Inhalation: If respiratory irritation occurs, go to fresh air. Flood work area with fresh air. If irritation continues,
seek medical attention.
Skin Contact: Remove contaminated clothing and shoes. Wash affected area(s) thoroughly with soap and water.
If irritant persists, seek medical attention. SOLVENTS SHOULD NOT BE USED because they
carry the irritant into the skin.
Eye Contact: Flush the eyes with plenty of water for at least 15 minutes. If necessary, gently hold eyelids open
during the flush. Immediately seek medical attention.
Ingestion: Obtain immediate medical attention. Do not induce vomiting. Should vomiting occur, be sure to
keep victim's head below hips to avoid aspiration of vomitus into the lungs.
5 FIRE FIGHTING MEASURES
Flash Point: >200F
Flash Point Method: Pensky Martens Closed Cup Method
Burning Rate: No data available
Autoignition Temperature: No data available
LEL: NA
UEL: NA
Special Fire Fighting Procedures: None. Avoid breathing smoke. NFPA Class B-C extinguisher (dry chemical or foam) for
class 1C fires. Water spray may be inneffective on fire but can protect fire-fighters and cool closed containers. Use fog
nozzels if water is used. Use supplied breathing masks.
MSDS Material Safety Data Sheet
UNITEX
PRO-FLEX
MSDS Number: 1016 Revision Date: 8/12/2008
3 of 5
Page
6 ACCIDENTAL RELEASE MEASURES
SMALL SPILLS: Absorb with an inert material (sand, vermiculite, etc.). Sweep or scoop up and put into disposal containers. Flush area immediately
with water (prevent water from entering waterways).
LARGE SPILLS:
Containment: For large spills, dike far ahead of liquid spill for later disposal. Do not release into sewers or waterways.
Clean-up: Absorb with an inert material (sand, vermiculite, etc.). Sweep or scoop up into disposal containers. Flush area immediately with water
(prevent water from entering waterways).
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Eliminate all ignition sources (flares, flames including pilot lights, electrical sparks). Persons not wearing protective equipment should be excluded
from area or until clean-up has been completed.
7 HANDLING AND STORAGE
Handling Precautions: For professional use only. Avoid eye/skin contact. Wash after using and before eating or
smoking. Avoid breathing vapors. Use as directed. Avoid uncontrolled mixing with other
mixtures (strong acids, bases and oxidizers). Respiratory protection is required when
ventilation is inadequate. NIOSH/OSHA approved respirators should be provided and
worn.
Storage Requirements: Store in a cool/dry location. Do not allow material to freeze, as product may be damaged.
Store away from sparks and open flames.
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:
Protective Equipment: HMIS PP, I | Goggles, Gloves, Dust and Vapor Respirator
HMIS PP, H | Splash Goggles, Gloves, Apron, Vapor Respirator
VENTILATION: Provide general or local exhaust ventilation systems to maintain
airborne concentrations below OSHA PELs. Local exhaust ventilation is preferred
because it prevents contaminant dispersion into the work area by controlling it at its
source.
RESPIRATORY PROTECTION: Seek professional advice prior to respirator selection
and use. Follow OSHA respirator regulations (29 CFR 1910.134) and, if necessary,
wear OSHA/NIOSH approved respirator. Select respirator based on its suitability to
provide adequate worker protection for given working conditions, level of airborne
contamination, and presence of sufficient oxygen.
PROTECTIVE CLOTHING/EQUIPMENT: Wear chemically protective gloves, boots,
aprons to prevent prolonged or repeated skin contact. Wear protective goggles and
face shield, per OSHA eye and face protection regulations (29 CFR 1910.133).
CONTAMINATED EQUIPMENT: Separate contaminated work clothes from street
clothes. Launder before reuse. Remove this material from your work shoes and clean
personal protective equipment.
OTHER PRECAUTIONS: Never eat, drink or smoke in work areas.
This material is not listed by the International Agency for
Research on Cancer, the National Toxicology Program, or the
Exposure Guidelines/Other:
Occupational Safety and Health Administration.
MSDS Material Safety Data Sheet
UNITEX
PRO-FLEX
MSDS Number: 1016 Revision Date: 8/12/2008
4 of 5
Page
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: A=Gray B=Amber
Physical State: A-Viscous Liquid B-Liquid Boiling Point: ND
Odor: A=Mild B=Distinctive Amine Freezing/Melting Pt.: ND/NE
pH: ND Solubility: Insoluble
Vapor Pressure: NE Spec Grav./Density: A=1.19 B=0.97
Vapor Density: (Air=1) >1
VOC: 0
Evap. Rate: Slower than Butyl Acetate
Viscosity: Thin Gel
Percent Volatile: 0
CURED EPOXY RESINS ARE INNOCUOUS.
10 STABILITY AND REACTIVITY
Stability: Stable
Conditions to avoid: Fires during curing process.
Materials to avoid (incompatability): Strong oxidizers, acids and bases.
Hazardous Decomposition products: CO, CO2, NOX
Hazardous Polymerization: None
11 TOXICOLOGICAL INFORMATION
No data available.
12 ECOLOGICAL INFORMATION
No data available.
13 DISPOSAL CONSIDERATIONS
When disposed of properly, this material does not meet RCRA classification or listing for hazardous waste. Never dispose of a
liquid in a landfill. Spilled material should be stabilized or solidifed prior to disposal. Once stabilized/solidified, the material
may be disposed of through normal means. Certain localities and state laws have specific disposal requirements for
non-hazarous industrial chemicals. Consult municipal authorites, landfill personnel, disposal companies for details prior to any
disposal activity. Always follow local, state and federal regulations.
MSDS Material Safety Data Sheet
UNITEX
PRO-FLEX
MSDS Number: 1016 Revision Date: 8/12/2008
5 of 5
Page
14 TRANSPORT INFORMATION
DOT Class: Corrosive (8) #8
Shipping Name: Amines Liquid Corrosive, N.O.S. (polyamine) UN2735, Class 8 Corrosive,
PGIII.
Placards required over 1000 lbs.
15 REGULATORY INFORMATION
This MSDS has been prepared in accordance with federal OSHA Hazard Communication Standard 29
CFR 1910.1200.
HMIS Codes: Health(3) Fammability(1) Reactivity(1) PPE(H)
16 OTHER INFORMATION
The information and recommendations in this document are based on the best information available to us at the time of preparation. We make no
other warranty, expressed or implied, as to its correctness, or as to the results or reliance of this product.
END OF MSDS DOCUMENT
|