MSDS Material Safety Data Sheet
UNITEX
Q-2 1 4
Page of
MSDS Number: 3003 Revision Date: 3/10/2007
1 PRODUCT AND COMPANY IDENTIFICATION
Manufacturer
UNITEX
3101 Gardner Ave.
Kansas City, MO 64120
Contact: Technical Services
Telephone Number: 816-231-7700
FAX Number: 816-483-3149
E-Mail: mail@unitex-chemicals.com
Web www.unitex-chemicals.com
Supplier Emergancy contacts & Phone
Contact #1 800-555-4545
Contact #2
Product Name: Q-2
Revision Date: 3/10/2007
MSDS Number: 3003
Product Code: Q-2
Product Use: Form Release
Emergency Telephone No.: 800-424-9300 CHEMTREC 24 Hrs.
2 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients:
Cas # Chemical Name Perc.
----------------------------------------------------------------
64742536 | Naphthenic petroleum oil mixture | >90%
None of the remaining components considered hazardous material or carcinogen (1910.1200
Hazard Communication (d) 4). Identity withheld as a trade secret.
3 HAZARDS IDENTIFICATION
Route of Entry: Eyes, Skin, Ingestion
Target Organs: None Known
Inhalation: May cause irritation to nose and throat.
Skin Contact: May cause irritation and dermatitis.
Eye Contact: May cause irritation.
Ingestion: May cause irritation of the mouth stomach and cause sensitization.
Hydrotreated Naphthenic Oil Mixture
CAS# 64742536 OSHA PEL 5mg/m3 as mist ACGIH TLV 5mg/m3
MSDS Material Safety Data Sheet
UNITEX
Q-2 2 4
Page of
MSDS Number: 3003 Revision Date: 3/10/2007
4 FIRST AID MEASURES
Inhalation: If overexposure occurs, remove victim to fresh air. If breathing stops, administer artificial respiration. Seek
immediate medical attention.
Skin Contact: Remove contaminated clothing as soon as possible. Wash exposed skin thoroughly with soap and water. If
irritation persists, consult a physician. Launder contaminated clothing before reuse. Exremely contaminated
leather shoes should be discarded.
Eye Contact: Flush eyes with plenty of water for at least 15 minutes. If necessary, gently hold eyelids open during the
flush. Immediately seek medical attention.
Ingestion: If a large amount of material is swallowed, do not induce vomiting. Should vomiting occur, be sure to keep
victim's head below hips to avoid aspiration of vomitus into the lungs. Immediately consult a physician. Do
not attempt to give liquid to an unconscious person.
CHRONIC: Not expected. Can cause in most extreme cases dermatitis, pheumontis, pulmonary edema or kidney damage.
Signs of overexposure: Headache, drowsiness, respiratory and skin irritation, nausea and numbness.
5 FIRE FIGHTING MEASURES
Flash Point: >295 F.
Flash Point Method: Pensky Martins Closed Cup Method
Burning Rate: Not available
Autoignition Temperature: No data available
LEL: Not determined
UEL: Not determined
Other:
Special Fire Fighting Procedures: None. Avoid breathing smoke. NFPA Class B-C fire
extinguisher (dry chemical, carbon dioxide or foam). Water spray may be ineffective on fire
but can protect fire-fighters and cool closed containers. Avoid spraying directly into
containers to prevent boilover.Explosion hazard when exposed to heat or flame. Vapor is
heavier than air and can travel a considerable distance to a source of ignition and
flashback.
Do not pressurize cut, drill, grind, or expose such containers to heat, flame, sparks, static electricity, or other sources of ignition; containers may
explode and cause injury or death.
6 ACCIDENTAL RELEASE MEASURES
Small Spills: Eliminate all ignition sources. Contain with earthen dike or petroleum absorbent material. Remove with grounded suction pump to a
salvage container. Remove all absorbent and contaminated materials.
Large Spills: For large spills, dike far ahead of liquid spill for later disposal. Do not release into sewers or waterways.
Cleanup: Remove all absorbent and contaminated materials.
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120)
7 HANDLING AND STORAGE
Handling Precautions: For professional use only. Avoid eye/skin contact. Wash after using and before eating or
smoking. Avoid breathing vapors. Use as directed. Avoid uncontrolled mixing with oxidizers.
Respiratory protection is required when ventilation is inadequate. NIOSH/OSHA approved
respirators should be provided and worn.
Storage Requirements: Store in a cool/dry location. Do not allow to freeze, as product may be damaged. Store away
from sparks and open flame.
MSDS Material Safety Data Sheet
UNITEX
Q-2 3 4
Page of
MSDS Number: 3003 Revision Date: 3/10/2007
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:
Protective Equipment: VENTILATION: Provide general or local exhaust systems to maintain airborne concentrations
below OSHA PELs. Local exhaust ventilation is preferred because it prevents contaminant
dispersion into the work area by controlling it at its source.
RESPIRATORY PROTECTION: Seek professional advice prior to respirator selection and use.
Follow OSHA respirator regulations (29 CFR 1910.134) and, if necessary, wear OSHA/NIOSH
approved respirator. Select respirator based on its suitability to provide adequate worker
protection for given working conditions, level of airborne contamination, and presence of sufficient
oxygen.
PROTECTIVE CLOTHING/EQUIPMENT: Wear protective gloves and boots to prevent prolonged
or repeated skin contact. Wear protective goggles per OSHA eye and face protection regulations
(29 CFR 1910.133).
CONTAMINATED EQUIPMENT: Separate contaminated work clothes from street clothes.
Launder before reuse. Remove this material from your work shoes and clean personal protective
equipment.
OTHER PRECAUTIONS: Never eat, drink or smoke in work areas.
This material is not listed by the International Agency for Research on Cancer, the National
Toxicology Program, or the Occupational Safety and Health Administration.
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Pale yellow
Physical State: Liquid Boiling Point: >490 F.
Odor: Characteristic Oil Freezing/Melting Pt.: -65 F.
pH: Not applicable Solubility: Nil
Vapor Pressure: <1 mm/Hg Spec Grav./Density: (H2O=1) .89
Vapor Density: (Air=1) >5
VOC: 125 g/l
Evap. Rate: Slower than Butyl Acetate
Percent Volatile: 0
10 STABILITY AND REACTIVITY
Stability: Stable
Conditions to avoid: Heat and flame.
Materials to avoid (incompatability): Oxidizers
Hazardous Decomposition products: CO, CO2, NOX
Hazardous Polymerization: Will not occur.
MSDS Material Safety Data Sheet
UNITEX
Q-2 4 4
Page of
MSDS Number: 3003 Revision Date: 3/10/2007
11 TOXICOLOGICAL INFORMATION
Acute Studies: Tests on similar materials show a low order of acute oral and dermal
toxicity.
Eye Effects: Minimal irritation on contact.
Skin Effects: May cause mild irritation with prolonged and repeated exposure.
Acute Oral Effects: Tests on similar material indicate low order of acute oral toxicity.
Acute Inhalation Effects: Low acute toxicity expected on inhalation.
This product is severely hydrotreated. Severely hydotreated naphthenic petroleum oils have
not been found to be carcinogenic or potentially carcinogenic.
12 ECOLOGICAL INFORMATION
Aquatic Release: Advise authorities if product has been entered or may enter watercourses
or sewer drains.
13 DISPOSAL CONSIDERATIONS
When disposed of properly, this material does not meet RCRA classification or listing for hazardous waste. Certain localities
and state laws have specific disposal requirements for non-hazardous industrial chemicals. Consult municipal authorites,
landfill personnel, disposal companies for details prior to any disposal activity. Always follow local, state and federal
regulations.
14 TRANSPORT INFORMATION
Not regulated by D.O.T. (contains oil).
Hazard class: Not applicable
DOT ID No.: Not applicable
Dot Shipping Label: Not regulated by D.O.T.
15 REGULATORY INFORMATION
This MSDS has been prepared in accordance with federal OSHA Hazard Communication Standard 29
CFR 1910.1200.
HMIS Codes: Health(1) Flammability(1) Reactivity(1) PPE(B)
16 OTHER INFORMATION
The information and recomendations in this document are based on the best information available to us at the time of preparation. We make no
other warranty, expressed or implied, as to its correctness or completeness, or as to the results or reliance of this product.
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
END OF MSDS DOCUMENT
|