MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 300 FAST
MSDS Number: 1006 Revision Date: 6/5/2008
1 of 5
Page
1 PRODUCT AND COMPANY IDENTIFICATION
Manufacturer
UNITEX
3101 Gardner Ave.
Kansas City, MO 64120
Contact: Technical Services
Telephone Number: 816-231-7700
FAX Number: 816-483-3149
E-Mail: mail@unitex-chemicals.com
Web www.unitex-chemicals.com
Product Name: PRO-POXY 300 FAST
Revision Date: 6/5/2008
MSDS Number: 1006
Common Name: Polyamine
Product Code: PRO-POXY 300 FAST
Chemical Family: Polyamine
Synonyms: Amines Liquid Corrosive
Product Use: Epoxy Adhesive
Chemtrec Emergency Telephone No:. 800-424-9300
2 HAZARDS IDENTIFICATION
Route of Entry: Eyes, Skin, Swallowing, Inhalation
Target Organs: None Known
Inhalation: May cause irritation to nose and throat.
Skin Contact: May cause irritation and dermatitis.
Eye Contact: May cause irritation, sensitization and may lead to eye damage.
Ingestion: May cause irritation of the mouth, stomach and sensitization.
HMIS II-ratings (scale 0-4): Health = 3, Fire = 1, Reactivity = 2
HMIS III-ratings (scale 0-4): Health = 3, Fire = 1, Physical Hazard = 2
NFPA-ratings (scale 0-4): Health = 3, Fire = 1, Reactivity = 2
None of the remaining components are considered a hazardous material or carcinogen (1910.1200 Hazard Communication (d) 4.)
OSHA PEL ACGIH TLV
COMPONENT A
25068386 NE NA
14807966 5 mg/m3 5 mg/m3
1317653 5 mg/m3 10 mg/m3
1317802 15 mg/m3 10 mg/m3
COMPONENT B
111417 NE NE
143237 NE NE
140318 NE NE
694837 NE NE
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 300 FAST
MSDS Number: 1006 Revision Date: 6/5/2008
2 of 5
Page
3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients:
Cas # Chemical Name Perc.
----------------------------------------------------------------
Component A
25068386 | Modified Epoxy Resin | >85%
14807966 | Talc | <8%
1317653 | Calcium carbonate | <8%
Component B
Trade Secret Amine Blend containing one or more of the following:
111411 | | <50%
143237 | |
140318 | |
694837 | |
90722 | 2,4,6 Tri(dimethylaminomethyl)phenol | <5%
1317653 | Coated Precipiated Calcium carbonate | <5%
471341 | Calcium carbonate | <40%
4 FIRST AID MEASURES
Inhalation: If respiratory irritation occurs, go to fresh air. Flood work area with fresh air. If irritation continues
seek medical attention.
Skin Contact: Remove contaminated clothing and shoes. Wash affected area(s) thoroughly with soap and water.
If irritation persists, seek medical attention. SOLVENTS SHOULD NOT BE USED because they
carry the irritant into the skin.
Eye Contact: Flush the eyes with plenty of water for at least 15 minutes. If necessary, gently hold eyelids open
during the flush. Immediately seek medical attention.
Ingestion: Obtain immediate medical attention. Do not induce vomiting. Should vomiting occur, be sure to
keep victim's head below hips to avoid aspiration of vomitus into the lungs.
5 FIRE FIGHTING MEASURES
Flash Point: >200 F
Flash Point Method: Pensky Martens Closed Cup
Burning Rate: No data available
Autoignition Temperature: No data available
LEL: NA
UEL: NA
Special Fire Fighting Procedures: None. Avoid breathing smoke. NFPA Class B-C extinguisher (dry chemical or foam) for
class 1C fires. Water spray may be ineffective on fire but can protect fire-fighters and cool closed containers. Use fog nozzels
if water is used. Use supplied breathing masks.
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 300 FAST
MSDS Number: 1006 Revision Date: 6/5/2008
3 of 5
Page
6 ACCIDENTAL RELEASE MEASURES
SMALL SPILLS: Absorb with an inert material (sand, vermiculite). Sweep or scoop up and put into disposal containers. Flush area immediately with
water (prevent water from entering waterways).
LARGE SPILLS:
Containment: For large spills, dike far ahead of liquid spill for later disposal. Do not release into sewers or waterways.
Cleanup: Absorb with an inert material (sand, vermiclite, etc.) Sweep or scoop up into disposal containers. Flush area immediately with water
(prevent water from entering waterways).
Regulatory Requirements: Follow applicable OSHA regulations (29 CFR 1910.120).
Eliminate all ignition sources (flares, flames including pilot lights, electrical sparks). Persons not wearing protective equipment should be excluded
from area or until spill clean-up has been completed.
7 HANDLING AND STORAGE
Handling Precautions: For professional use only. Avoid eye/skin contact. Wash after using and before eating or
smoking. Avoid breathing vapors. Use as directed. Avoid uncontrolled mixing with other
mixtures (strong acids, bases and oxidixers). Do not use solvents to thin. Respiratory
protection is required when ventilation is inadequate. NIOSH/OSHA approved respirators
should be provided and worn.
Storage Requirements: Store in a cool/dry location. Do not allow material to freeze, as product may be damaged.
Store away from sparks and open flames.
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:
Protective Equipment: HMIS PP, H | Splash Goggles, Gloves, Apron, Vapor Respirator
VENTILATION: Provide general or local exhaust ventilation systems to maintain
airborne concentrations below OSHA PELs. Local exhaust ventilation is preferred
because it prevents containment dispersion into the work area by controlling it at its
source.
RESPIRATORY PROTECTION: Seek professional advice prior to respirator selection
and use. Follow OSHA respirator regulations (29 CFR 1910.134) and if necessary,
wear OSHA/NIOSH approved respirator. Select respirator based on its suitablity to
provide adequate worker protection for given working conditions, level of airborne
contamination, and presence of sufficient oxyen.
PROTECTIVE CLOTHING/EQUIPMENT: Wear chemically protective gloves, boots,
aprons to prevent prolonged or repeated skin contact. Wear protective goggles and
face shield, per OSHA eye and face protection (29 CFR 1910.133).
CONTAMINATED EQUIPMENT: Separate contaminated work clothing from street
clothes. Launder before reuse. Remove this material from your work shoes and clean
personal protective equipment.
OTHER PRECAUTION: Never eat, drink, or smoke in work areas.
This material is not listed by the International Agency for
Research on Cancer, the National Toxicology Program, or the
Exposure Guidelines/Other:
Occupational Safety and Health Administration.
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 300 FAST
MSDS Number: 1006 Revision Date: 6/5/2008
4 of 5
Page
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: A- White Gel B-Gray Gel
Physical State: Gel Boiling Point: ND
Odor: A=Mild B=Strong Distinctive Freezing/Melting Pt.: ND/NE
pH: ND Solubility: Insoluble
Vapor Pressure: N/E Spec Grav./Density: (H2O =1) A:1.20 B:1.64
Vapor Density: (Air=1) >1
VOC: <50 g/l
Evap. Rate: Slower than Butyl Acetate
Viscosity: Gel
Percent Volatile: 0
10 STABILITY AND REACTIVITY
Stability: Stable
Conditions to avoid: None
Materials to avoid (incompatability): Strong oxidizers, acids and bases.
Hazardous Decomposition products: CO, CO2, NOX
Hazardous Polymerization: None
11 TOXICOLOGICAL INFORMATION
No data available.
12 ECOLOGICAL INFORMATION
No data available.
13 DISPOSAL CONSIDERATIONS
When disposed of properly, this material does not meet RCRA classification or listing for hazardous waste. Never dispose of a
liquid to a landill. Spilled material should be stabilized or solidified prior to disposal. Once stabilized/solidified, the material
may be disposed of through normal means. Certain localities and state laws have specific disposal requirements for
non-hazardous industrial chemicals. Consult local municipal authorities, landfill personnel, disposal companies for details prior
to any disposal activity. Always follow local, state and federal regulations.
14 TRANSPORT INFORMATION
DOT Class: Corrosive (8) #8
Shipping Name: Amines, Liquid Corrosive, N.O.S. (aminopropyldietanolamine) UN2735, Class 8
Corrosive PG III.
Placards required over 1000 lbs..
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 300 FAST
MSDS Number: 1006 Revision Date: 6/5/2008
5 of 5
Page
15 REGULATORY INFORMATION
THis MSDS has been prepared in accordance with federal OSHA Hazard Communication Standard 29
CFR 1910.1200.
HMIS Codes: Health(3) Flammability(1) Reactivity(2) PPE(H)
16 OTHER INFORMATION
The information and recommendations in this documnet are based on the best information available to us at the time of preparation. We make no
other warranty, expressed or implied, as to its correctness or completness, or as to the results or reliance of this product.
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
END OF MSDS DOCUMENT
|