Material Safety Data Sheet
Revision: 12/28/2005
Hazard information is provided for compliance with both the UK Chemicals
(Hazard Information and Packaging) (CHIP) Regulations and the US Hazard
Communication Standard (HCS)
IDENTIFICATION OF THE PRODUCT NAME: PRODUCT CODE: EEC NUMBER:
SUBSTANCE/PREPARATION Antimycin A 11375 None
AND COMPANY
SUPPLIER: Emergency Contact:
USB Corporation, 26111 Miles Road, Cleveland, Ohio 44128 Phone: (216) 765-5000 Chemtrec (800) 424-9300
Please visit our website at www.usbweb.com for contact information on USB Outside USA & Canada 703 527 3887
product distributors within your area.
COMPOSITION/
HAZARDOUS COMPONENTS HAZARD CAS NO. %WT TLV CHIP R & S Phrases
Antimycin A 1397-94-0 --- R:25 Toxic if swallowed.
$98%
S:26 In case of contact with
eyes, rinse immediately with
plenty of water and seek
medical advice.
S:36/37/39 Wear suitable
protective clothing, gloves,
and eye/face protection.
S:45 In case of accident or if
you feel unwell, seek medical
advice immediately (show the
label where possible).
HAZARDS IDENTIFICATION CHIP
Toxic
HCS
Highly Toxic
FIRST-AID MEASURES EYES: Flush with water for 15 minutes. Seek medical advice if irritation persists.
SKIN: Flush with water, then wash thoroughly with soap and water. Remove contaminated clothing and
wash before reuse. Seek medical attention if irritation persists.
INHALATION: Remove the victim from exposure and move to fresh air. If breathing is difficult, give
oxygen. If not breathing, give artificial respiration. Keep victim quiet and warm. Seek immediate
medical attention.
INGESTION: Drink water and seek immediate medical attention. Avoid alcoholic beverages. Never give
anything by mouth to an unconscious person.
FIRE-FIGHTING INFORMATION Use media suitable to extinguish the supporting or surrounding fire. Wear NIOSH (or equivalent) approved self
contained breathing apparatus. For small fires only: use carbon dioxide, dry powder or foam. Emits toxic fumes
under fire conditions. NFPA Rating: H=3 F=0 R=1.
Flash Point = No data available.
ACCIDENTAL RELEASE MEASURES Wear appropriate personal protective equipment and clothing including lab coat, safety glasses, gloves and
NIOSH-approved respirator. Collect in a manner that does not create dust and place in a suitable waste
container. Avoid contact of material with skin or eyes. Use adequate ventilation.
HANDLING AND STORAGE Wear appropriate personal protective equipment and clothing including lab coat, safety glasses, gloves and
NIOSH-approved respirator. Avoid contact of material with skin or eyes. Use adequate ventilation. Store at
+4掳C away from incompatible substances. Moisture sensitive. Keep container tightly closed.
PERSONAL PROTECTION Wear appropriate personal protective equipment and clothing including lab coat, safety glasses, gloves and
NIOSH-approved respirator. A qualified industrial hygienist should evaluate the need for respiratory protection.
Use respiratory protection approved by NIOSH (or equivalent) and appropriate to the hazard. Avoid contact of
material with skin or eyes. Mechanical ventilation or local exhaust as needed to control exposure to dust,
vapors or mists. Access to a safety shower and eye-wash.
MSDS information may be continued on back of page.
PHYSICAL AND CHEMICAL Appearance: White powder Boiling Point: No data available
PROPERTIES Vapor Pressure: No data available Vapor Density: No data available
Solubility (Water): Insoluble Specific Gravity: No data available
Percent Volatile: No data available Evaporation Rate: No data available
Chemical formula: C28-H40-N2-O9
STABILITY AND REACTIVITY Product is stable under normal conditions. Incompatible with strong oxidizing agents. Moisture sensitive.
Hazardous decomposition products may include carbon and nitrogen oxides. Hazardous polymerization will not
occur.
TOXICOLOGICAL INFORMATION EFFECTS OF OVEREXPOSURE:
EYES: Contact may cause irritation and possible corneal damage.
SKIN: May be harmful if absorbed through the skin. Contact may cause irritation, dermatitis and hypersensitive
individuals may experience an allergic reaction.
INHALATION: May be harmful if inhaled. Material may cause irritation to mucous membranes and upper
respiratory tract.
INGESTION: Toxic if swallowed. Chronic ingestion or excessive dosage may cause gastrointestinal irritation,
central nervous system disorders, bone marrow diseases, liver and kidney damage.
ADDITIONAL INFORMATION:
Mutation and toxicity data listed in RTECS under CD0350000.
Oral Rat LD50 = 28 mg/kg (1966). Details of toxic effects not reported other than lethal dose value.
Definitions: RTECS = Registry of Toxic Effects of Chemical Substances
ECOLOGICAL INFORMATION No information available.
DISPOSAL CONSIDERATIONS Dispose of material in accordance with applicable local, state, and federal regulations.
TRANSPORTATION INFORMATION US DOT / IATA: Toxic solid, organic, n.o.s (Antimycin A), Class 6.1, UN2811, PG II, Label = Toxic.
REGULATORY INFORMATION RCRA - No applicable information.
SARA 302 - Final RQ = 1000 lbs (454.5 Kg). TPQ = 1000/10000 lbs.
SARA 313 - This material is not reportable under 313.
EPA TSCA Section 8(b) - This chemical substance is NOT specifically listed on the EPA TSCA Inventory. It is
supplied for research and developmental use only, by or directly under the supervision of technically
qualified individuals. NOT for manufacturing or commercial purposes.
Exposure Limits - Not established.
California Proposition 65 - This product is or contains chemical(s) known to the state of California to cause
developmental toxicity.
This data sheet is based upon information believed to be reliable. The Company makes no statement or warranty as to the accuracy or completeness of the
information contained herein which is offered for your consideration, investigation and verification. Any use of the information contained in this data sheet
must be determined by the user to be in accordance with appropriate applicable regulations.
|