MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 400
MSDS Number: 1003 Revision Date: 7/2/2008
1 of 4
Page
1 PRODUCT AND COMPANY IDENTIFICATION
Manufacturer
UNITEX
3101 Gardner Ave.
Kansas City, MO 64120
Contact: Technical Services
Telephone Number: 816-231-7700
FAX Number: 816-483-3149
E-Mail: mail@unitex-chemicals.com
Web www.unitex-chemicals.com
Product Name: PRO-POXY 400
Revision Date: 7/2/2008
MSDS Number: 1003
Product Code: PRO-POXY 400
Chemical Family: Epoxy Resin. Epoxy Acrylate Blend
Product Use: All-weather epoxy acrylate hybrid anchoring gel
Chemtrec Emergency Telephone No:. 800-424-9300
2 HAZARDS IDENTIFICATION
Route of Entry: Eyes, Skin, Swallowing, Inhalation
Target Organs: Eyes, Skin, Upper Respiratory System. Medical conditions aggravated by exposure (none
identified)
Inhalation: May produce irritation, sensitization.
Skin Contact: May produce irritation, sensitization.
Eye Contact: May cause irritation. Symptoms include stinging, tearing, and redness.
Ingestion: May produce irritation, sensitization.
3 COMPOSITION/INFORMATION ON INGREDIENTS
Ingredients:
Cas # Chemical Name Perc.
----------------------------------------------------------------
Component A
| Acrylate Blend | 30-50%
80626 | |
9010882 | |
14808607 | Silica, crystalline | 40-60%
Component B
94360 | Benzoyl Peroxide | 10-25%
68515402 | | 10-25%
471251 | Calcium carbonate | 20-50%
25068386 | Epoxy Resin | 10-25%
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 400
MSDS Number: 1003 Revision Date: 7/2/2008
2 of 4
Page
4 FIRST AID MEASURES
Inhalation: If respiratory irritation occurs, go to fresh air. Flood work area with fresh air. If irritation continues
seek medical attention.
Skin Contact: Remove contaminated clothing and shoes. Remove product from skin immediately with a dry cloth
or paper towel. Wash affected area(s) thoroughly with soap and water. SOLVENTS SHOULD
NOT BE USED because they carry the irritant into the skin. If irritation persists, seek medical
attention.
Eye Contact: Flush the eyes with plenty of water for at least 15 minutes. If necessary, gently hold eyelids open
during the flush. Immediately seek medical attention.
Ingestion: Obtain immediate medical attention. Drink large amounts of water. DO NOT INDUCE VOMITING.
5 FIRE FIGHTING MEASURES
Flash Point: A - 65F / B - 315F
Flash Point Method: Pensky Martens Closed Cup
Burning Rate: No data available
Autoignition Temperature: No data available
LEL: A: 2.1% B: n/a
UEL: A: 12.5% B: n/a
Flammability Classification: Flammable Liquid
Treat as flammable liquid, with explosive vapors. Self contained breathing apparatus may be required. Protect against eye
and skin contact. Fight fire from distance as heat may rupture containers. Avoid breathing vapors. Explosion hazard when
exposed to heat or flame. Cool exposed containers with water. Vapor is heavier than air and can travel a considerable
distance to a source of ignition and flashback.
NFPA Class B-C extinguisher (dry chemical or foam) for class 1c fires. Water spray may be ineffective on fire but can protect
fire fighters and cool closed containers. Use fog nozzles if water is used. Use supplied breathing masks.
6 ACCIDENTAL RELEASE MEASURES
Eliminate all ignition sources (flares, flames including pilot lights, electrical sparks). Use anti-sparking tools. Persons not wearing protective
equipment should be excluded from area or until spill clean-up has been completed. Stop spill at source. Prevent from entering drains, sewers,
streams or other bodies of water. Prevent from spreading. Try to prevent parts A & B from mixing. Collect with absorbent material and place in
container for proper disposal. For large spill, transfer to salvage vessels and dispose of according to state, local and federal regulations. Flush area
with water to remove residue. DO NOT CONFINE. Never return spillage to original container for reuse.
7 HANDLING AND STORAGE
Handling Precautions: For professional use only. Avoid eye/skin contact. Wash after using and before eating or
smoking. Avoid breathing vapors. Use as directed. Avoid uncontrolled mixing with other
mixtures (strong acids, bases and amines). Hazardous polymerization may occur with
excessive heat.
Storage Requirements: Store in a cool/dry location. Do not allow material to freeze, as product may be damaged.
Store away from sparks and open flames.
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 400
MSDS Number: 1003 Revision Date: 7/2/2008
3 of 4
Page
8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Controls:
Protective Equipment: Respiratory Protection: NIOSH approved respirator for emergency use or when
inadequate ventilation may exist. Local exhaust is preferable. Mechanical equipment is
acceptable. Protective chemical resistant gloves (recommended butyl rubber solvent
resistant gloves), safety goggles/face shield and splash bib. Other equipment as
required to prevent prolonged contact. Written respirator program is outlined in 29 CFR
1910.134, and is required by OSHA.
This material is not listed by the International Agency for
Research on Cancer, the National Toxicology Program, or the
Exposure Guidelines/Other:
Occupational Safety and Health Administration.
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: A- White Gel, distinctive odor B-Black Gel, slight odor
Physical State: Gel Boiling Point: ND
Odor: A:Distinctive B:Slight odor Freezing/Melting Pt.: ND/NE
pH: ND Solubility: nil
Vapor Pressure: N/E Spec Grav./Density: A:1.56 B:1.64
Vapor Density: A: 3.5 B: n/a
VOC: A: n/a B: n/a
Evap. Rate: Ether=1 A<3 B>1
10 STABILITY AND REACTIVITY
Stability: Stable
Conditions to avoid: Heat, sparks and open flames. Hazardous polymerization may occur with heat.
Materials to avoid (incompatability): Isolate from strong oxidizers, acids, bases and amines.
Hazardous Decomposition products: CO, CO2, hydrocarbons
Hazardous Polymerization: A: Occurs with heat, absence of inhibitor, addition of catalyst.
B: Does not occur
11 TOXICOLOGICAL INFORMATION
No data available
12 ECOLOGICAL INFORMATION
No data available.
13 DISPOSAL CONSIDERATIONS
Dispose of in accordance with all applicable local, state and federal regulations.
MSDS Material Safety Data Sheet
UNITEX
PRO-POXY 400
MSDS Number: 1003 Revision Date: 7/2/2008
4 of 4
Page
14 TRANSPORT INFORMATION
Shipping Name: Adhesive, 3, UN1133, PGIII, Emergency Response Guide No. 27
Label Flammable Liquid 3 (only when shipping by air or water)
Canada EPA: All ingredients listed on DSL.
WHMIS: A n/a B: Class C
15 REGULATORY INFORMATION
THis MSDS has been prepared in accordance with federal OSHA Hazard Communication Standard 29
CFR 1910.1200.
HMIS Codes: Health(2) Flammability(3) Reactivity(2) PPE(J)
WHMIS: A: n/a B: Class C
Hazard class 3, Flammable Liquid
Adhesive, 3, UN1133, PGIII, Emergency Response Guide No. 27
Canada EPA: All ingredients listed on DSL
TSCA Inventory Status: Chemical components are listed on TSCA inventory SARA Title III,
Section 313. This product contains mercaptan which is subject to reporting under Section 313
or SARA Title III (40CFR Part 372).
16 OTHER INFORMATION
The information and recommendations in this documnet are based on the best information available to us at the time of preparation. We make no
other warranty, expressed or implied, as to its correctness or completness, or as to the results or reliance of this product.
This product has been classified according to the hazard criteria of the CPR and the MSDS contains all the information required by the CPR.
END OF MSDS DOCUMENT
|