MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: B-220 Catalyst
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
1. General Notes
This formulation is a trade secret and considered confidential and proprietary information of Team, Inc.
UND = Undetermined
NA = Not Applicable
2. Product Information
Product Part Number / Name: 903-0018 / B-220 Catalyst
Chemical Family: Epoxy Resin
Product Use: Industrial Leak Sealant
Product Description: Catalyst
3. Hazardous Ingredients OSHA ACGIH OSHA ACGIH
PEL TLV PEL TLV Possible
Compound CAS Number Percent (mg/m3) (mg/m3) (ppm) (ppm) Carcinogen
does not contain hazardous
ingredients
Notes
4. Physical Data
Boiling Point (F): > 500 F. Specific Gravity (H20 = 1): UND.
Vapor Pressure (mm Hg): .030 mmHg @ 77 F. Melting Point (F): UND.
Solubility in H20: Slight Evaporation Rate (Butyl Acetate = 1): UND.
Appearance and Odor: Colorless liquid with slight chemical odor.
5. Fire and Explosion Hazard Information
Flash Point (Closed Cup) (F): > 230 F
Flammability Limits in Air (%): Low: UND. High: UND.
Extinguishing Media: Water fog, carbon dioxide, dry chemical.
Special Fire Fighting Procedures: SCBA with full faceshield
Unusual Fire and Explosion None known.
Page 1 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: B-220 Catalyst
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
6. Reactivity Data
Stability: Stable.
Conditions to Avoid: None known.
Materials to Avoid: Amines, strong alkalies, strong mineral acids, strong oxidizing agents.
Hazardous Decomposition Products: May form carbon dioxide and carbon monoxide, various hydrocarbons.
Hazardous Polymerization: None known.
7. Health Hazards
Routes of Entry:
Inhalation: Yes
Skin: Yes
Eyes: Yes
Ingestion: Yes
Acute Symtoms:
Inhalation: May cause irritation to the mucous membrane of throat and respiratory
tract.
Skin: Repeated or prolonged exposure may cause irritation.
Eyes: May cause irritation and in extreme cases, possibly blindness.
Ingestion: May be harmful if swallowed.
Carcinogenicity:
National Toxicology None.
IARC Monographs: None.
OSHA Regulated: None.
Chronic Symptoms: Repeated or prolonged exposure may result in accumulation of toxins to
cause illness to the body which includes nausea, vomiting, diarrhea and
irritation to nose, throat, and airways. Target organs are skin sensitization.
Page 2 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: B-220 Catalyst
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
Medical Conditions Aggravated: None Known.
1st Aid Procedures:
Inhalation: Immediately remove from contaminated area to fresh air. Keep individual
quiet. In case of respiratory distress, give oxygen or give artificial
respiration. Obtain medical attention.
Skin: Thoroughly wash affected area with soap and water. Flush area with
water for 15 minutes. If irritation develops, obtain medical attention.
Eyes: Flush with water for at least 15 minutes. If irritation develops, obtain
medical attention.
Ingestion: Do not induce vomiting. Obtain medical attention.
8. Safe Handling / Disposal / Use
Releases or Spills: Soak up with absorbent material. Place in container for disposal. If
needed, on small spills flush with large quantities of water and detergent.
Disposal: Landfill or incinerate in accordance with federal, state, and local
regulations.
Ventilation: Use adequate ventilation.
Other Storage Precautions: Keep away from open flames. Avoid prolonged contact with skin.
9. Control Measures
Respiratory Protection: If ventilation is poor, an organic vapor respirator is recommended.
Ventilation: Local exhaust is usually adequate. If necessary use mechanical exhaust.
Hand Protection: Hydrocarbon resistant gloves recommended.
Eye Protection: Safety goggles or glasses.
Other: Other equipment as necessary.
Hygienic Practices: Wash hands with soap and water.
Page 3 of 4
MATERIAL SAFETY DATA SHEET (MSDS)
PRODUCT NAME: B-220 Catalyst
Team, Inc. Prepared By: James H. Varner
Team Industrial Services, Inc. Revision Date: July 1, 2006
TECO Manufacturing, Inc. Team Main: 281-331-6154
200 Hermann Drive 8 - 5 CDT: 281-388-5618
Alvin, Texas 77511 Answering Service: 281-482-3530
CHEMTREC: 800-424-9300
10. Hazard Ratings
NFPA
Health: 2
Flammability: 1
Reactivity: 0
11. Additional Information
This data is offered in good faith as typical values and not as a product specification. No warranty, is
either expressed or implied. The recommended handling procedures are believed to be generally
applicable. However, each user should review these recommendations in the specific context of the
intended use.
End of Document
Page 4 of 4
|