Description:
Opalescence速 is a dentist-controlled, dentist-supervised, take-home bleaching system
dispensed in unit-dose syringes. It is a clear, flavored, high-viscosity, sticky, 35%
carbamide peroxide gel (pH ~6.5). Opalescence has also been proven to reduce caries
Opalescence速 susceptibility, lower sensitivity, improve the microhardness of the enamel and improve
enamel health.
35% Opalescence速 PF carbamide peroxide gel contains 0.5% potassium nitrate and 0.11%
weight to weight (1100 ppm) fluoride ion. Opalescence PF is available in 10, 15, 20
Tooth Whitening System and 35% carbamide peroxide.
All Opalescence products have unique qualities including sustained release, adhesive
properties, and a custom designed application tray.
Indications:
Opalescence has been shown to be effective for removing the colors present on teeth from the time of tooth eruption and/or the stains
of aging. Success of varying degrees is usually obtained with tetracycline and brown fluorosis discoloration. Opalescence is also used on
nonvital teeth for intracoronal bleaching. Opalescence provides a more conservative modality of treating dark, discolored teeth (compared
to crowns, veneers, etc.). This includes discolorations caused by congenital, systemic, etabolic, pharmacological, traumatic, or iatrogenic
factors such as dental fluorosis, tetracycline and adult minocycline stains, trauma, erythroblastosis fetalis, jaundice, and porphyria.
Peroxide is a strong oxidizing agent. Bleaching occurs from the peroxide penetrating into the enamel and dentin and oxidizing the
offending stains within the tooth.
Whitening occurs first and more rapidly within the enamel. For example, most of the disfiguring stains for tetracycline occur within the
dentin; hence, their oxidation (whitening) requires more time.
Because restorative materials will not whiten, we recommend whitening dark teeth before restorative placement so that restorations can
be matched to the new lighter shades (wait two weeks following bleaching procedures before placing restorations). The dentist can now
restore natural teeth to the lighter colors they used to be, or possibly to lighter natural shades never before experienced by the patient.
General Information:
More attention must be given to tray design because of the sticky, viscous, sustained release features in comparison to early bleaching
products!
100
To avoid or reduce irritation, it is advised to limit peroxide contact to 90
tooth surfaces rather than spilling onto soft tissues. 80
If instructions are followed, more predictable results are obtained in days 70
Peroxide
rather than weeks. Less peroxide is swallowed as loading of tray occurs 60
50
one to two times daily. Gel stays active 8-10 hours in the mouth. 40
%
Results occur more rapidly, which reduces the chronic long-term exposure 30
to peroxide. 20
10
Our experience has shown that a soft, thin tray material is best 0
(Sof-Tray速 0.035?), since it is more comfortable. With a thin tray, 1 2 3 4 5 6 7 8 9 10
15 secs.
awareness of the tray is minimized, since it occupies less of the patients Hours
Sustained Release Test: After dental examination and prophy, Opalescence-
interocclusal space. In addition, scalloping and reservoirs further reduce
filled customized tray (plastic membrane) was inserted. Small quantities of
pressure on the teeth and gums. gel were removed at various intervals throughout the night for analysis of
percentage of active ingredient.
Pre-Treatment Procedure:
1. Before bleaching treatment, a diagnosis must be performed. Ensure
the presence of soft tissue health to minimize tissue trauma. Failed
restorations and/or areas of caries should be restored. Exposed root
surfaces may experience sensitivity. If large areas are exposed, or if
restorations are inadequate, patients can develop mild to moderately
severe pain. Sometimes this can be addressed by simply trimming
the tray back, or areas can be covered with a bonding agent.
2. Remove calculus and external stains. If tissue is traumatized, wait Stay shy of gingiva, scalloping Lapping onto gingiva
around interdental papilla. may irritate tissues.
one to two weeks before beginning bleaching treatment to
minimize possible gingival sensitivity.
3. Wait two weeks following the bleaching procedure before matching and placing resin-bonded restorations because time is
required for color stabilization. This is important before placing definitive tooth-colored restorations.
4. Occasionally a slight purple discoloration may appear in the tray following bleaching adjacent to amalgam fillings.
This discoloration has proven inconsequential in our years of bleaching experience.
5. When bleaching teeth with large amalgam restorations or cores, the teeth may appear darker. This is because the internal restoration
becomes more visible through the bleached enamel. The patient should be made aware that a more extensive esthetic restoration may
be required following bleaching.
6. Some teeth do not respond to bleaching, and occasionally the colors return shortly after completion of treatment. This is often the
result of a temporary color shift caused by dehydration (and then rehydration) of the teeth. With difficult intrinsic stains, the thicker
portions of the tooth usually lighten less (i.e., gingival third lightens less than the body and incisal thirds).
7. If the dentist anticipates that swallowing or aspiration of an appliance may occur, treatment should be avoided.
8. When tray is not in service, it should always be stored in appliance case provided with each Opalescence kit.
9. Dark, nonvital, endodontically treated teeth are rapidly whitened by opening lingual access of tooth. The patient is given an Ultradent速
syringe with a Black Micro速 tip and instructed to irrigate lingual opening with water, then fill opening with Opalescence. The tray is
then loaded and inserted. Evaluate periodically, as nonvital teeth can whiten significantly in 1-4 days.
{
Procedure: Ultradent Products, Inc.
Attn: Tray Fabrication
1. Fabricate the tray using laboratory instructions (page 7), or send the working
505 West 10200 South
cast/model, and prescription order form (enclosed in kit) to Ultradent. South Jordan, Utah 84095
2. Use patient instructions provided to instruct patient on the bleaching procedure,
cleaning, tray loading, application of Opalescence, and tray care. Explain treatment regimes to patient:
a. Treatment times vary from patient to patient. A session should last between 30 minutes and two hours depending on patient comfort.
b. Stopping for multiple nights does not jeopardize continued bleaching when reinitiated.
3. Occasionally sensitivity may require treatment. First treatment of choice is application of UltraEZ速, a potassium nitrate, sticky, viscous gel that
may be worn in the Opalescence bleaching tray from 1-2 hours to overnight as needed. Alternative treatments include the following:
a. Patient may wear tray with a near-neutral, sticky, viscous, bland fluoride gel (Flor-Opal速). Daytime use insulates teeth from cold,
allowing sensitivity to subside.
b. Appropriate administration of mild anti-inflammatory analgesics (e.g., ibuprofen or aspirin).
4. It is standard to evaluate patients every 3-5 days of treatment. The clinician may schedule checkups more or less frequently, depending
on patients? needs and degree of progress. The number of days required for complete treatment mainly depends on the type of stains
present and their severity. For example, tetracycline stains will require more treatment time than other types of disfiguring stains.
Instruct patient to fill tray with 1/3 to 1/2 of syringe.
Precautions:
1. Read and understand all instructions. Use recommended tray design and administer appropriate treatment regime to maintain optimal
patient comfort.
2. Gingival and general oral health should be good.
3. As a safety precaution, Opalescence should NOT be used during pregnancy.
4. If patient has a known allergy or chemical sensitivity to peroxides, carbopol, glycerin, etc., Opalescence is NOT to be used. Mint flavor
can be irritating to some patients. If patient has a known sensitivity to mint, use alternate flavors.
5. Restorations should be adequately sealed and all exposed sensitive dentin should be covered. If a history of sensitivity exists, treat
with appropriate restoration, dentin bonding agent, etc., or temporarily with dentin sealant.
6. Areas of hypocalcification can exist which may not be visible to the naked eye. Hypocalcified areas will whiten faster, thereby
becoming more obvious during bleaching. Continue bleaching treatment until the unaffected tooth surface blends. Re-evaluate two
weeks after bleaching treatment when tooth color has stabilized.
7. Monitor patients progress every few days, depending on severity of tooth discoloration. If only a minor change is desired, evaluate
the patients progress within 1-3 days. Since some teeth become more translucent with bleaching, observe teeth with large metallic
fillings closely to prevent show-through.
8. If gingival or tooth discomfort persists (such as excessive temperature sensitivity), inform patient to remove tray, discontinue
treatment, and to make an appointment for evaluation of degree of sensitivity.
9. Maintain control of Opalescence whitening agent, dispensing only what is needed to reach the next evaluation appointment
(approximately 3 to 5 days). Monitor patients? bleaching progress to prevent bleaching beyond the desired level of whitening or
degree of translucency.
10.Understand each patients expectations before beginning treatment. Inform patients that existing crowns, tooth colored
fillings, etc., do not whiten, even though natural teeth potentially will.
11.Opalescence whitening agent is supplied in preloaded 1.2ml unit-dose syringes. Material is NOT to be injected, and patients should be
instructed to dispose of syringes when empty.
12.For dentist storage, material should be refrigerated to maintain shelf life. Instruct patients to keep Opalescence out of heat and/or
direct sunlight.
13.Patients with heavy occlusion or bruxers may require a thicker tray. We recommend 0.60? tray material.
14.Avoid treatment if patient may swallow or aspirate tray.
Step 1 Step 2 Step 3
Laboratory Instructions:
1. Pour impression with fast set plaster or dental stone. Alginate must be poured shortly after making impression to ensure accuracy.
Trimming is less work if quantity of stone is kept to a minimum. However, have enough mass to ensure removal of model from
impression without fracture. Trim base of cast parallel to the occlusal table on model trimmer to within a few millimeters of gingival
margin for ease of manipulation. Note palate and tongue areas are removed. Allow model to dry two hours.
Step 4 Step 5 Step 6 Step 7
2. Ultradent速 LC Block-Out quickly provides reservoir spaces in tray. Apply ~0.5mm thickness of material onto desired labial surfaces.
Stay about 1.5mm from gingival line. DO NOT extend onto incisal edges and occlusal surfaces. This prevents margin of tray from
opening upon biting and/or impinging on soft tissues. Patients may experience less tooth discomfort from tray pressures with
reservoirs because of reduced orthodontic pressures. Cure LC Block-Out for approximately 2 minutes (Ultra-Lume速). A hand-held
intraoral light can be used (~20-40 seconds per tooth). Wipe off oxygen inhibition layer.
4. With vacuum former (UltraVac? or use Econo Vacuum Former), heat tray material until it sags approximately 1 inch. Activate vacuum
and adapt softened plastic onto model. Cool and remove model.
5. Cut excess bulk of material away with serrated plastic trimmers (Ultradent速 Utility Cutters).
6. With small tactile scissors (Ultra-Trim? Scalloping Scissors), carefully and precisely trim tray 0.25 to 0.33mm occlusal from gingival
margin. Scallop the gingival embrasures to prevent covering the gingival papillae with the tray. The papillae may become
sore and irritated if tray covers them!
Keep reservoir below incisal
7. Return tray to model; check tray extensions. and occlusal surfaces.
Gently flame polish edges, one quadrant at Reservoirs on facial aspect only.
Puddle block-out resin for
a time (Blazer速 Micro Torch). reservoir approximately 0.5mm deep.
8. While still warm, hold periphery of each Keep reservoir approximately
1.5mm from gingiva.
segment firmly against model for three
Trim tray approximately 0.25 - 0.33mm
seconds with water-moistened finger. If an shy of gingiva.
area is short of the desired length, gently Scallop around interdental papilla, trimming tray approximately 0.25 to 0.33mm shy of gingiva.
heat and push the tray material to the
desired location. If this over thins the
tray material, a new tray should
be fabricated.
If one or more teeth are much darker than others (e.g.,
Teeth of lower esthetic concern
overly dark cuspids), build reservoirs on cuspids only to
need not receive resin.
balance end whitening results.
Opalescence 速
Tooth Whitening Systems
EN- DENTIST INSTRUCTIONS & LAB INSTRUCTIONS
The Opalescence Shade Guide is Vacuum adapt Sof-Tray速 sheet to
Construct and dry stone model, Apply LC Block-Out Resin 0.5mm
handy for shade discussions and model. Cool and separate.
cutting palate and tongue thick; ~1.5mm from gingiva.
records. areas out. Avoid incisal and occlusal edges.
Cure 20 seconds.
Nonvital: Access lingual.
Trim tray ~0.3mm from Flame polish and readapt. Instruct patient on bleaching
gingival margin. Scallop around protocol using Opalescence Remove gutta percha ~2mm
interdental papilla. Patient Instruction.? past CEJ. Place 2mm glass
ionomer seal.
Bleaching Precautions:
1. Do not use household bleach to whiten your teeth.
General Precautions:
2. Remove tray from mouth after 30 minutes.
1. For professional use only.
3. Pregnant women should not bleach.
4. Keep gel out of heat/sunlight. Do not freeze. 2. Review instructions, precautions, and MSDS before beginning
5. Tooth fillings and crowns do not respond to tooth bleaching.
treatment. Use only as directed.
6. Foods and juices high in acid may cause sensitivity.
3. Keep products out of heat/sunlight.
7. If you have any questions regarding the appropriate use of this product,
please consult your dentist as soon as possible. 4. Avoid skin exposure to resins.
8. Do not use tobacco products or eat while bleaching.
5. Isolate strong chemicals to area of treatment.
属F 属C
6. Confirm that patient has no known allergies to treatment materials.
7. Test flow of materials from syringe and tip before using intraorally.
Refrigerate Irritant
8属
46属
8. Never force syringe plungers.
2属
36属
9. Clean and disinfect syringes between patients.
Opalescence 速
Zahnbleichmittel-System
DE- Anleitungen f端r den Zahnarzt/Anleitungen f端r das Labor
Die Opalescence - Zahnfarbenkarte Sof-Tray-Folie 端ber das Modell
Gipsmodell vorbereiten LC Block-Out Resin ca. 0,5 mm
ist eine prak-tische Hilfe im tiefziehen. Abk端hlen lassen und
und trocknen; Gaumen-und dick auftragen; ca. 1,5 mm
Gespr辰ch 端ber die Zahnfarbe sowie abnehmen.
Zungenpartien enternen. Abstand von der Gingiva halten.
zur Kontrolle. Inzisalkanten und okklusale H旦cker
aussparent. 20 Sek. lich-th辰rten.
Schiene beschneiden, so da sie ca. Schienenr辰nder Flammenpolieren? Devitale Z辰hne: Lingualen Zugant
Patient instruieren gem辰
0,3 mm Abstand vom Gingivalrand und andr端cken. schaffen. Wurzelf端llung bis 2 mm
der Opalescence Patienten-
hat. Interdentalpapillen sauber 端ber die Schmelz-Zement-Grenze
Instrucktion?.
freilegen. hinaus entefemen. 2 mm starke
Glasionomer-Abeckung legen.
Vorsichtsmanahmen beim Bleichen:
1. Verwenden Sie kein Haushalts-Bleichmittel, um Ihre Z辰hne aufzuhellen. Allgemeine Vorsichtsmanahmen:
2. Nehmen Sie die Bleichschiene nach 30 minuten aus dem Mund. 1. Nur f端r professionelle Anwendungen.
3. Bleichen kann f端r schwangere Frauen sch辰dlich sein. 2. Lesen Sie die Anleitungen, Warnungen und MSDS, bevor Sie mit der Behandlung
4. Sch端tzen Sie das Gel vor Hitze und direkter Sonneneinstrahlung. anfangen. Bitte folgen Sie den Anleitungen genau.
Frieren Sie es nicht ein. 3. Produkt nicht in die Sonne legen oder Hitze aussetzen.
5. Zahnf端llungen und Kronen werden von der Aufhellung nicht beeinflut. 4. Nicht auf die Haut auftragen.
6. Nahrungsmittel und Getr辰nke mit hohem S辰ureanteil k旦nnen Empfindlichkeiten bewirken. 5. Chemikalien nur auf die Behandlungsfl辰che auftragen.
7. Sollten Sie Fragen zu dieser Behandlung haben, wenden Sie sich an Ihren Zahnarzt. 6. Kl辰ren Sie vorab, ob Patienten allergisch auf Inhaltsstoffe reagieren.
8. W辰hrend der Aufhellungsbehandlung sollen Sie nicht rauchen oder essen. 7. Testen Sie den Ausfluss der Fl端ssigkeit aus der Spritze, bevor Sie das Produkt beim
Patienten auftragen.
属F 属C
8. Die Spritze nicht mit Gewalt benutzen.
9. Reinigen und desinfizieren Sie Spritzen zwischen den Anwendungen.
K端hlen Irritierend 10. Spitzen nach der Anwendung vernichten.
8属
46属
2属
36属
11. Benutzen Sie standardm辰ige H辰rtebestrahlung f端r Licht-polymerisierende/
aktivierende Materialien.
Opalescence 速
Syst竪me de blanchiment des dents
FR- Instructions pour le dentiste/Instructions pour le laboratoire
Le teintier Opalescence est id辿al Proc辿der au thermoformage dune
Couler le mod竪le en pl但tre, Appliquer une couche de 0.5
mm de r辿sine LC Block Out
pour la d辿termination de teinte et plaque Sof-Tray sur le mod竪le.
s辿cher le mod竪le et 辿liminer
plac辿e 1.5 mm de la gencive.
la discussion. Laisser refroidir puis d辿tacher du
la partie centrale (palatine &
Eviter e bord incisal et occlusal. mod竪le.
linguale).
Photopolym辿riser 20 secondes.
Dents d辿vitalis辿es: Refaire une
D辿couper la goutti竪re 0.3 Chauffer l辿g竪rement les bords Informer le patient sur le
cavit辿 dacc竪ss palatine. Eliminer
mm de la gencive. D辿couper la flamme et r辿adapter. protocole laide de la fiche
la gutta 2 mm au del de la
avec soin au niveau des papilles instructions pour le patient?.
jonction am辿lo-c辿mentaire. Placer
interdentaires.
un ciment verre ionom竪re au
Pr辿cautions pour le blanchiment niveau de lentr辿e canalaire.
1. Ne pas utiliser des solutions blanchissantes m辿nag竪res pour le blanchiment de Pr辿cautions g辿n辿rales:
vos dents. 1. Destin辿 une utilisation professionnelle uniquement.
2. Elever le porte-empreinte de la bouche apr竪s 30 minutes. 2. Revoyez les instructions, les pr辿cautions et les fiches toxicologiques avant de com
3. Les femmes enceintes de devraient pas se faire blanchir les dents. mencer le traitement. A utiliser uniquement selon les instructions.
4. Tenir le gel labri de la chaleur et du soleil. Ne pas congeler. 3. Gardez les produits loin de la chaleur/de la lumi竪re.
5. Les couronnes et les restaurations ne r辿pondent pas au traitement de blanchiment. 4. Evitez dexposer la peau.
6. Les aliments et les boissons acides peuvent entra樽ner des sensibilit辿s. 5. Isolez les produits chimiques forts la zone de traitement.
7. Si vous avez des questions concernant ce traitement, veuillez contacter votre dentiste. 6. Confirmez que le patient na pas dallergies connues aux mat辿riaux du traitement.
8. Ne pas fumer ni manger lors du blanchiment. 7. Testez le flux des mat辿riaux sortant de la seringue et de lembout avant de les
utiliser intraoralement.
属F 属C
8. Ne forcez jamais sur le piston de la seringue.
9. Nettoyez et d辿sinfectez les seringues entre chaque patient.
R辿frig辿rer Irritant 10. Jetez les embouts apr竪s utilisation.
8属
46属
2属
36属
11. Utilisez des lampes de polym辿risation conventionnelles avec tous les mat辿riaux
polym辿ris辿s/activ辿s la lumi竪re.
Opalescence 速
Tandenbleeksysteem
NL- Instructies voor de tandarts/Instructies voor het laboratorium
De Opalescence kleurstaal is Trek een Sof-Tray sheet vacu端m
Vervaardig en droog een Breng LC Block-Out aan in een
dikte van 0,5 mm. Blijf ca. 1,5
handig bij het vastleggen van over het model. Laat afkoelen
gipsmodel. Verwijder het
mm van de gingiva. Vermijd
gegevens en discussie over en trek los.
tonggedeelte of het palatum.
incisale en occlusale randen. Hard
kleuren.
20 seconden uit met licht.
Avitaal: Open linguaal. Verwijder
Knip de tray tot ca. 0,3 mm vanaf Polijst met een vlam en adapt-eer Instrueer de pati谷nt, met behulp
gutta percha tot ca. 2 mm voorbij
de gingivale rand. De interdentale opnieuw. van de pati谷nteninstructie, hoe
de kroonglazuurgrens. Plaats een
papillen vrij laten. Opalescence volgens uw protocol
2 mm dikke glasionomeerbodem.
te gebruiken.
Voorzorgsmaatregelen voor bleken:
1. Gebruik geen huishoudbleekmiddelen om uw tanden te bleken.
Algemene voorzorgsmaatregelen:
2. Haal de vorm na 30 minuten uit de mond. 1. Uitsluitend voor professioneel gebruik.
3. Zwangere vrouwen dienen hun tanden niet te bleken. 2. Lees de gebruiksaanwijzing, voorzorgsmaatregelen en veiligheidsinformatiebladen
4. Houd de gel uit hitte en zonlicht. Niet invriezen. (MSDS) voorafgaand aan de behandeling goed door. Gebruik het product
5. Vullingen en kronen reageren niet op bleken. uitsluitend zoals voorgeschreven.
3. Zorg dat het product niet aan hitte/zonlicht wordt blootgesteld.
6. Zuur voedsel en dranken zoals vruchtensappen kunnen gevoeligheid veroorzaken.
4. Voorkom dat het product met de huid in aanraking komt.
7. Indien er vragen zijn over deze behandeling, vraag uw tandarts.
5. Breng sterke chemicali谷n alleen aan op de behandelingsplaats.
8. Niet roken en eten tijdens het bleken. 6. Controleer of de pati谷nt niet allergisch is voor de behandelingsmaterialen.
7. Test hoe het materiaal uit de spuit en punt stroomt voordat u het intraoraal toepast.
属F 属C
8. Druk de plunjer van de spuit nooit met kracht in.
9. Reinig en desinfecteer spuiten voordat u deze bij de volgende pati谷nt gebruikt.
Koelen Irriterend 10. De punten moeten na gebruik worden weggegooid.
8属
46属
2属
36属
11. Gebruik standaard uithardingslampen bij alle met licht gepolymeriseerde/
geactiveerde materialen.
Opalescence 速
Sistema di sbiancamento dei denti
IT- Istruzioni per il dentista/Istruzioni per il laboratorio
La scala colori Opalescence 竪 Termoformare un foglio Sof-Tray
Preparare e lasciare asciugare Applicare uno strato di 0,5mm
di LC Block-Out tenendosi a ~
comoda per discussioni sul colore sul modello. Lasciare raffreddare
un modello di guesso duro.
1,5mm dalla gengiva. Evitare
e per la cartella clinica. quindi separare.
Squadrare via le aree palatali
i bordi incisali e occlusali.
o linguali.
Fotopolimerizzare 20 secondi.
Denti non-vitalil: Accesso
Ritagliare il cucchiaio a ~0,3mm Lucidare e a fiamma e adattare Informare il paziente sul proprio
linguale. Togliere la guttaperca
dal margine gengivale. Scaricare nuovamente. protocollo usando le Istruzioni
per ~2mm oltre la qiunzione
le papille interdentali. Opalescence per il Paziente?.
amelo-cementizia. Porre un sigillo
Precauzioni per imbiancamento: vetroionomerico di 2mm.
1. Non usate la candeggina domestica per sbiancare i vostri denti. Precauzioni Generali:
2. Rimuovere il vassoio dalla bocca dopo 30 minuti. 1. Solo per uso professionale.
3. Le donne in stato interessante non devono eseguire imbiancamento dei denti. 2. Leggere le istruzioni, le precauzioni e il Foglio di Sicurezza Materiali prima di iniziare
4. Tenere il gel lontano da fonti di calore e dalla luce solare diretta. il trattamento. Usare solo secondo le istruzioni.
Non congelare. 3. Tenere i prodotti lontano dalle fonti di calore e dalla luce del sole.
5. Le otturazioni dentarie e le corone non rispondono alla sbiancamento. 4. Evitare il contatto con la pelle.
6. I cibi ed i succhi molto acidi possono provocare sensibilit.
5. Tenere i prodotti chimici lontani dalle aree dove si svolge la terapia.
7. Per ogni chiarimento su questo trattamento, rivolgetevi al vostro Dentista.
6. Confermare che il paziente non ha allergie conosciute ai materiali utilizzati per la
8. Non usate tabacco n竪 mangiate durante lo sbiancamento.
terapia.
属F 属C
7. Provare il flusso dei materiali dalla siringa e dalla punta prima di usarli per via intraorale.
8. Non forzare mai lo stantuffo della siringa.
9. Pulire e disinfettare le siringhe tra un paziente ed un altro.
Refrigerare Irritante
8属
46属
10. Le punte vanno gettate dopo luso.
2属
36属
11. Utilizzare delle luci fotopolimerizzanti standard con tutti i materiali fotopolimerizzabili.
Opalescence 速
Sistema de blanqueamiento de dientes
ES- V辿ase la Instrucciones/Instrucciones del Laboratorio
La gu鱈a de colores. Opalescence Con la m叩quina de termovac鱈o,
Construya y seque el modelo Aplique una capa de LC Block-Out
de 0.5mm de espesor, m叩s o
se usa para discusiones y notas. adapte la hoja Sof-Tray. Deje que
de yeso, cortando el 叩rea del
menos a 1.5mm de la enc鱈a. Evite se enfr鱈e y saque el modelo.
paladar y la lengua.
las superficies incisal y oclusal.
Polimerice durante 20 segundos.
Blanqueamiento no-vital: Abra
Recorte la cubeta m叩s o menos Pula los bordes de los cuadrantes Exliquale al paciente las
0.3mm del margen gingival. con una aplicaci坦n de calor instrucciones de usar Opalescence. el acceso lingual, quite m叩s o menos
Festonee alrededor de la papila (llama) y readapte. 2mm de gutta percha pasando el
interdentaria. CEJ. Selle aproximadamente con
2mm de lon坦mero de Vidrio.
Precauciones de Blanqueo: Precauciones Generales:
1. No use blanqueador dom辿stico comercial para blanquear los dientes. 1. S坦lo para uso profesional.
2. Retire la bandeja de la boca despu辿s de 30 minutos. 2. Revise las instrucciones, precauciones y la Hoja de Datos de Seguridad del
Material antes de iniciar el tratamiento. selo solamente de la manera indicada.
3. Las mujeres embarazadas no deben banquearse los dientes.
3. Mantenga estos productos alejados del calor y de la luz solar.
4. Mantenga el gel alejado del calor y/o de la luz solar directa. No lo congele.
4. Evite la exposici坦n de la piel.
5. Las coronas y rellenos no responden al blanqueamiento.
5. A鱈sle los qu鱈micos fuertes del 叩rea de tratamiento.
6. Las comidas y jugos que contienen muchos 叩cidos, pueden causar sensibilidad.
6. Aseg炭rese de que el paciente no sufra de alergias conocidas a los materiales del
7. Si tiene preguntas concernientes a este tratamiento, por favor pregunte a su dentista.
tratamiento.
8. No fume ni coma durante el tratamiento.
7. Realice una prueba de flujo de los materiales de la jeringa y la punta antes de
usar de manera intraoral.
属F 属C
8. Nunca fuerce el 辿mbolo de la jeringa.
9. Limpie y desinfecte las jeringas entre los pacientes.
Refrigerar Irritante
8属
46属
10. Las puntas se eliminan despu辿s de usar.
2属
36属
11. Utilice las fotocuraciones est叩ndar con todos los materiales
activados/polimerizados de luz.
Opalescence 速
Sistema de Branqueamento de dentes
PT -Instru巽探es do dentista/Instru巽探es do laborat坦rio
A guia de cor Opalescence 辿 Activar o v叩cuo e adaptar a placa
Confeccionar e secar modelo Aplicar o LC Block-Out numa
camada de 0.5mm, mantendo
conveniente para discuss探es de Sof-Tray sobre o modelo. Arrefecer
de gesso, cortando as 叩reas do
uma dist但ncia de cerca de 1.5mm
cor e registros. e remover.
palato e da lingua. da gingiva. Evitar bordos incisais e
oclusais. Fotopolimerizar durante
20 s.
Dentes n達o vitais: Acesso
Cortar a moldeira cerca de 0.3mm Passar pela chama, polir e Instruir o paciente sobre o
lingual. Remover a gutta percha
da margem gengival. Recortar em readapter. seu protocolo, utilizando as
cerca de 2mm para al辿m da
torno da papila interdent叩ria. Instru巽探es para o Paciente?.
linha esmalte-dentina. Colocar
uma base de ion坦mero de vidro
Precau巽探es de branqueamento
de 2mm de espessura.
1. N達o utilizar material de branqueamento caseiro para branquear os dentes.
Precau巽探es gerais:
2. Remova a moldeira da boca ap坦s 30 minutos.
1. Destina-se apenas utiliza巽達o profissional.
3. As gr叩vidas n達o devem branquear os dentes. 2. Rever as instru巽探es, precau巽探es e as fichas de seguran巽a do produto antes de iniciar
4. Manter o gel fora do calor/sol. N達o congelar. o tratamento. Utilizar apenas conforme indicado.
5. Obtura巽探es e coroas n達o branqueam. 3. Manter fora do calor/luz solar.
6. Comida e sumos altamente 叩cidos podem causar sensibilidade. 4. Evitar a exposi巽達o pele.
5. Isolar a 叩rea de tratamento contra qu鱈micos fortes.
7. Se tiver duvidas sobre o tratamento, contactar o seu dentista.
6. Confirmar que o paciente n達o tem alergias conhecidas aos materiais de tratamento.
8. N達o fumar ou comer durante o branqeamento.
7. Testar o fluxo dos materiais da seringa e da ponta antes de utilizar intraoralmente.
8. Nunca for巽ar o 棚mbolo da seringa.
属F 属C
9. Limpar e desinfectar as seringas entre cada paciente.
10. As pontas s達o descartadas ap坦s a utiliza巽達o.
Refrigerar Irritante
8属
46属
11. Utilizar luzes de polimeriza巽達o padr達o com todos os materiais fotopolimerizados/
2属
36属
activados.
Opalescence 速
Tandblekningssystem
SV - Tandl辰karinstruktioner/Labbinstruktioner
Opalescence f辰rgskala bra hj辰lp Vakumforma en Sof-Tray till en
Tillverka en model, enligt bilden Applicera LC Block-Out 0.5 mm
vid f辰rgval och dokumentation. sked. Kyl ned och separera fr奪n
ovan. tjockt; 1.5 mm fr奪n gingiva.
model.
Undvik incisala sk辰r och occlusala
ytor. Ljush辰rda 20 sek.
Icke vital tand: ppna kavum,
Trimma skeden -0.3mm kort fr奪n Polera kant med flamma och Anv辰nd Opalescence patient
gingiva. Fril辰gg 辰ven papiller. 奪teradaptera. instruktionsblad, vid information avl辰gsna guttaperka- 2 mm f旦rbi
til patienten. cement/emaligr辰nsen, applicera
2 mm glasionomer f旦rsegling.
F旦rsiktighets奪tg辰rder vid blekning:
1. Anv辰nd enbart blekmedel erh奪llna av tandl辰kare. Generella f旦rsiktighets奪tg辰rder:
2. Ta ut skenan ur munnen efter 30 minuter. 1. Endast f旦r yrkesm辰ssigt bruk.
3. Gravida kvinnor ska inte anv辰nda blekmedel. 2. G奪 igenom instruktioner, varningar och varuinformation (MSDS) innan
behandlingen p奪b旦rjas. Anv辰nd endast produkten enligt anvisningarna.
4. Uts辰tt ej gel f旦r v辰rme och solljus. Frys ej.
3. Produkterna ska h奪llas borta fr奪n hetta/solljus.
5. Kronor och fyllningar g奪r aldrig att bleka.
4. Undvik hudkontakt.
6. Mat och juicer med l奪gt Ph kan ge sensibililitet.
5. Begr辰nsa starka kemiska medel till behandlingsomr奪det.
7. Om ni har fr奪gor r旦rande behandlingen, konsultera Er tandl辰kare.
6. Bekr辰fta att patienten inte har n奪gra k辰nda allergier mot behandlingsmaterial.
8. R旦k eller 辰t ej under sj辰lva behandlingen.
7. Kontrollera att materialet fl旦dar mellan sprutan och spetsen f旦re intraoral anv辰ndning.
属F 属C
8. Tvinga aldrig sprutkolven.
9. Reng旦r och desinficera sprutor mellan patienter.
10. Sl辰ng spetsarna efter anv辰ndning.
F旦rvara i Irriterande
8属
46属
11. Anv辰nd standard h辰rdningsljus med alla ljuspolymeriserande/ljusaktiverade
2属
36属
kylsk奪p
material.
Opalescence 速
Tandblegningssystem
DA - Tandl脱gevejledninger/Laboratorievejledninger
Opalescence farveskalaen Vacuumform en Sof-Tray plade
Fremstil en gipsmodel. Fjern Applicer LC Block-Out resin i et
0,5mm tykt lag p奪 facialfladen af
er velegnet til diagnostik til gipsmodellen. Afk淡l og adskil
gane og tungeomr奪der.
t脱nderne p奪 gipsmodellen. Hold ca.
og journalisering af skinne og model.
1,5 mm afstand til gingiva. Undg奪
adgangssituationen samt ved resin p奪 incisalkanter og okklusalt.
farvediskussioner med patienten. Polymeriser i 20 sekunder.
Non-vital blegning: Pr脱parer
Trim skinnen til ca. 0,3 mm Flammepol辿r og s脱t skinnen Instru辿r patienten i brug af
adgangskavitet lingualt. Fjern
fra margo gingiva. Lad kanten tilbage p奪 modellen. skinne og blegegel ved hj脱lp af
guttapercha rodfyldningen til ca.
af skinnen f淡lge papillerne Opalescence Patient vejledning?.
2 mm apikalt for emalje-cement
interdentalt i samme afstand.
gr脱nsen. Lav en 2 mm tyk
Forholdsregler ved tandblegning: forsegling af glasionomer.
Generelle forholdsregler:
1. Anvend kun blegemiddel udleveret af tandl脱gen.
1. M奪 kun anvendes af tandl脱gepersonale.
2. Tag skeen ud af munden efter 30 minutter.
2. L脱s vejledningerne, forholdsreglerne og sikkerhedsdatabladene, inden behandlingen
3. Gravide kvinder b淡r ikke underg奪 tandblegning.
p奪begyndes. M奪 kun anvendes som angivet.
4. Uds脱t ikke blegegelen for varme eller sollys. T奪ler ikke frysning.
3. Produkterne skal holdes v脱k fra varme/sollys.
5. Fyldninger og kroner p奪virkes ikke af blegemidlet - og beholder den oprindelige farve.
4. Undg奪 hudkontakt.
6. Mad - og drikkevarer med h淡jt indhold af syre (lav pH v脱rdi) kan give f淡lsomhed.
5. Isoler st脱rke kemikalier til behandlingsomr奪det.
7. Hvis du har sp淡rgsm奪l til behandlingen, bedes du kontakte din tandl脱ge.
6. Bekr脱ft, at patienten ingen kendte allergier har overfor behandlingsmaterialerne.
8. Spis eller ryg ikke, n奪r du har skinnen med gel i munden.
7. Afpr淡v materialeudstr淡mingen fra spr淡jte og spids inden intraoral brug.
属F 属C
8. Spr淡jtestemplet m奪 aldrig forceres.
9. Reng淡r og desinfic辿r spr淡jterne imellem hver patient.
Opbevares Irritant 10. Spidserne skal kasseres efter anvendelse.
8属
46属
2属
36属
k淡ligt 11. Anvend almindelige polymeriseringslamper til alle lyspolymeriserende/-aktiverede
materialer.
Opalescence 速
Hampaiden valkaisuj辰rjestelm辰
FI - Ohjeet hammasl辰辰k辰rille/Ohjeet laboratoriolle
Opalescence v辰rikartta on hyv辰 Muotoile vakuumipr辰ssill辰 Sof-Tray
Valmista kipsimalli yll辰olevan Vie LC Block-Out resiini 0.5 mm
paksuisena kerroksena ~ 1.5 mm
apuv辰line valittaessa sopivaa -levy kipsimallille. J辰辰hdyt辰 ja
kuvan mukaisesti.
ikenest辰. V辰lt辰 inkisaalik辰rki辰 ja
v辰ris辰vy辰 sek辰 dokumentoitaessa. irrota kipsimallista.
okklusaalipintoja. Valokoveta 20
sekuntia.
Ei-vitaali hammas: Avaa
Muotoile lusikka ~0.3 Muotoile ja kiillota lusikan reunat K辰y l辰pi potilaan kanssa
linguaalisesti. Poista guttaperkkaa
mm ienrajasta. Tee pyk辰l辰 liekill辰. Opalescence kotihoito-ohjeet,
~2mm kiille/dentiinirajan
interdentaalipapillan ymp辰rille. k辰ytt辰en apuna Opalescence
alapuolelta. Vie 2 mm paksuinen
potilasohie-esitett辰.
lasi-ionomeerisuojakerros.
Valkaisua koskevat varotoimet:
Yleiset ohjeet:
1. K辰yt辰 vain hammasl辰辰k辰rilt辰 saamaasi valkaisuainetta. 1. Vain ammattik辰ytt旦旦n.
2. Ota j辰ljenn旦slusikka suusta 30 minuutin kuluttua. 2. Lue ohjeet ja varotoimia koskevat kohdat sek辰 k辰ytt旦turvallisuustiedote ennen
3. Raskaana olevien naisten hampaita ei pit辰isi valkaista. hoidon aloittamista. K辰yt辰 vain ohjeissa mainitulla tavalla.
4. Pid辰 valkaisugeeli poissa kuumuudesta ja auringonvalosta. l辰 p辰辰st辰 j辰辰tym辰辰n. 3. Suojaa tuote kuumudelta ja auringonvalolta.
5. Valkaisuaine ei tehoa paikkoihin eik辰 kruunuihin. 4. V辰lt辰 ihokosketusta.
6. Happamet ruoat ja mehut voivat aiheuttaa herkkyytt辰. 5. K辰sitelt辰v辰n alueen ulkopuoliset alueet pit辰辰 suojata v辰kevilt辰 kemikaaleilta
7. Mik辰li sinulla on kysytt辰v辰辰 hoidosta, otta yhteytt辰 omaan hammasl辰辰k辰riisi. erist辰m辰ll辰.
6. Varmista, ettei potilas ole allerginen hoidossa k辰ytett辰ville materiaaleille.
8. l辰 k辰yt辰 tupakkatuotteita valkaisuhoidon aikana.
7. Varmista, ett辰 materiaalit virtaavat vapaasti ruiskun k辰rjest辰 ennen suunsis辰ist辰
属F 属C
k辰ytt旦辰.
8. l辰 koskaan pakota ruiskujen m辰nti辰.
S辰ilyt辰 9. Puhdista ja desinfioi ruiskut potilaskohtaisen k辰yt旦n j辰lkeen.
rsytt辰v辰
8属
46属
2属
36属
kylm辰ss辰 10. H辰vit辰 k辰rjet k辰yt旦n j辰lkeen.
11. K辰yt辰 vakiokovetusvaloa kaikkien polymeroitujen/aktivoitujen materiaalien kanssa.
Opalescence 速
裡侶亮留 了竜虜留僚侶 隆凌僚旅ﾎ
EL - 隆侶粒溜竜 粒旅留 凌僚/侶僚 凌隆凌僚溜留凌/隆侶粒溜竜 粒旅留 凌 竜粒留流旅凌
属F 属C
留 了略竜留旅
竜慮旅旅虜
8属
46属
凌 粒竜溜凌
2属
36属
Opalescence 速
弌亳亠仄舒 亟仍 仂弍亠仍亳于舒仆亳 亰弍仂于
RU - 仆从亳亳 亟仍 仂仄舒仂仍仂亞舒/仆从亳亳 亟仍 仍舒弍仂舒仂亳亳
亠亟仂仂仂亢仆仂亳 于 仗亳仄亠仆亠仆亳亳 仂弍亠仍亳于舒仆亳
1. 亠 仗仂仍亰亶亠 弍仂于仄 仂弍亠仍亳于舒亠仍亠仄 亟仍 仂弍亠仍亳于舒仆亳 亰弍仂于
2. 丕亟舒仍亳亠 仍仂仂从 亳亰仂 舒 亠亠亰 30 仄亳仆.
3. 弍亠仍亳于舒仆亳亠 仗仂亳于仂仗仂从舒亰舒仆仂 弍亠亠仄亠仆仆仄.
4.
5.
6.
7.
8.
属F 属C
8属
46属
2属
36属
rodki ostro甜noci przy wybielaniu zb坦w:
1. Do wybielania zb坦w nie stosowa domowych wybielaczy.
2. Wyjmij tack z ust po 30 minutach.
3. Kobiety w ci甜y nie powinny przechodzi zabieg坦w wybielania zb坦w.
4.
5.
6.
7.
8.
属F 属C
8属
46属
2属
36属
Di Beyazlatmayla 聴lgili nlemler:
2- Tepsiyi a脹zdan 30 dakika sonra 巽脹kar脹n.
3- Hamile kad脹nlar dilerini beyazlatmamal脹d脹r
属F 属C
8属
46属
2属
36属
豺覩碁葦 ? 譯殊:
2.30覿? ?, 蟲螳朱覿?? 碁企ゼ 蟇壱?.
3.磯?? 豺覩碁葦 ? 蠍.
属F 属C
8属
46属
2属
36属
属F 属C
8属
46属
2属
36属
犖犢犖犖犖о牽犖犖萎硯犖園犢犖犖犖迦牽犖犖園犖犖朽犖園: 犖犢犖犖犖о牽犖犖萎硯犖園犖犖園犖о:
犖犖橿犖迦犖犖巌検犖犢犖犖犖犖犖迦犖犖迦犖犖ム険犖犢犖о献犖迦犢犖迦犢犖犢犖犢 30 犖犖迦?
犖犖犖犖朽検犖朽犖犖犖犢犢犖÷犖犖о牽犖犖園犖犖朽犖園?
属F 属C
8属
46属
2属
36属
羲巡羈:
2. 30緇ゃｅｻｃ?
3. 絋紿羲純?
属F 属C
8属
46属
2属
36属
materIal Safety data Sheet Controlled Product Yes No
SectION I - IdeNtIfIcatION Of the SubStaNce/preparatION aNd Of the cOmpaNy/uNdertakINg
Material Manufactured by Ultradent Products, Inc.
Opalescence速
Name
505 West 10200 South
South Jordan, Utah 84095 USA
Material
Tooth Whitening Agent
Use
Emergency
1-800-552-5512 or 1-801-572-4200 (Outside USA)
Contact
Date EC Representative
June 2, 2006
Prepared by: Richard Tuttle, D.D.S.
SectION II - cOmpOSItION/INfOrmatION ON INgredIeNtS
Approximate LD50/LC50
Active Ingredients C.A.S. N.A. or U.N. Numbers
Concentration % Specify Species and Route
Carbamide peroxide 10% LD50 7060 mg/kg 124-43-6
Oral ? Rat
SectION III - hazardS IdeNtIfIcatION
Adverse Human Effects
R18: In use, may form flammable/explosive vapour-air mixture.
and Symptoms
SectION Iv - fIrSt aId meaSureS
No specific treatment is necessary since this material is not likely Immediately flush eyes with plenty of water for at least 15 minutes.
Eye
Inhalation
to be hzardous by inhalation. Get immediate medical attention.
Contact
Ingestion If swalled, do NOT induce vomiting. Give victim a glass of water or
Skin Wash with soap and water. Get medical attention if irritation
milk. Call a physician or poison control center immediately.
Contact develops or persists.
SectION v - fIre-fIghtINg meaSureS
Flammability If Yes, Under General: Evacuate all personnel; us protective equipment for fire-fighting. Use self-contained breathing apparatus when the
Yes No Which Conditions: product is involved in fire.
Means of Protective Equipment Protective equipement.
Water spray only. for Firefighters
Extinction
SectION vI - accIdeNtal releaSe meaSureS SectION vII - haNdlINg aNd StOrage
Personal & Environmental Do not allow to enter sewers or drains that may lead Handling Avoid contact with eyes, skin and clothing.
Precautions to waterways. Precautions
Storage
Methods for
Wipe up with cloth, soap and water. Refrigerate when not in use.
Cleaning Requirements
SectION vIII - eXpOSure cONtrOlS/perSONal prOtectION
Eye
Respiratory S38: In case of insufficedint ventilation, wear suitable Use chemical splash goggles and face shield.
Protection
Protection respiratory equipment.
Hand Skin
Latex gloves. S36/37 Wear suitable protective clothing and gloves.
Protection Protection
SectION IX - phySIcal & chemIcal prOpertIeS
Melting
Solubility in
Appearance Clear gel. Completely. Not defined.
Point/Range
Water
None.
pH
Odor Flavored (Mint or Melon) ~6.5 Other Data
SectION X - StabIlIty aNd reactIvIty
Chemical Stability Conditions and Avoid strong bases, metals. Excess heat, exposure to moist air or Hazardous Decomposition
N/A
Yes No water. Products
Materials to Avoid
SectION XI - tOXIcOlOgIcal INfOrmatION
Route of Entry Skin Contact Skin Absorption Eye Contact Inhalation Acute Inhalation Chronic Ingestion
Effects and Symptoms Eye effects: May cause mild irritation. Skin effects: May cause slight irritation.
of Short-Term Exposure
Chronic Effects and Symptoms Eye effects: May cause mild irritation. Skin effects: May cause slight irritation.
of Long-Term Exposure
Irritancy
Sensitization Not defined. Slight.
of Product
SectION XII - ecOlOgIcal INfOrmatION SectION XIII - dISpOSal cONSIderatIONS
Method of
Biodegradability Not defined. Dispose of according to local and government regulations.
Waste Disposal
SectION XIv - traNSpOrt INfOrmatION SectION Xv - regulatOry INfOrmatION
R18: In use, may form flammable/explosive vapou-air mixture.
Not regulated.
EEC Oxidizer - "O"
SectION XvI - Other INfOrmatION
FOR DENTAL USE ONLY. Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturers knowledge) believed to be accurate;
however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability of the recommendation
and assumes no liability to any user thereof. Each user should review these recommendations in the specific context of the intended use and
determine whether they are appropriate. For unabriged copy of this MSDS please go to www.ultradent.com.
materIal Safety data Sheet Controlled Product Yes No
SectION I - IdeNtIfIcatION Of the SubStaNce/preparatION aNd Of the cOmpaNy/uNdertakINg
Material Manufactured by Ultradent Products, Inc.
Opalescence速 PF
Name
505 West 10200 South
South Jordan, Utah 84095 USA
Material
Tooth Whitening Agent with Potassium Nitrate and Fluoride
Use
Emergency
1-800-552-5512 or 1-801-572-4200 (Outside USA)
Contact
Date EC Representative
June 2, 2006
Prepared by: Richard Tuttle, D.D.S.
SectION II - cOmpOSItION/INfOrmatION ON INgredIeNtS
Approximate LD50/LC50
Active Ingredients C.A.S. N.A. or U.N. Numbers
Concentration % Specify Species and Route
Carbamide peroxide 10%, 15% or 20% LD50 7060 mg/kg 124-43-6
(labeled on syringe) Oral ? Rat
Sodium Fluoride 0.25% LD50 200 mg/kg; Oral ? Rabbit 007681-49-4
SectION III - hazardS IdeNtIfIcatION
Adverse Human Effects R18: In use, may form flammable/explosive vapour-air mixture.
and Symptoms
SectION Iv - fIrSt aId meaSureS
No specific treatment is necessary since this material is not likely Immediately flush eyes with plenty of water for at least 15 minutes.
Eye
Inhalation
to be hzardous by inhalation. Get immediate medical attention.
Contact
Ingestion If swalled, do NOT induce vomiting. Give victim a glass of water or
Skin Wash with soap and water. Get medical attention if irritation
milk. Call a physician or poison control center immediately.
Contact develops or persists.
SectION v - fIre-fIghtINg meaSureS
Flammability If Yes, Under General: Evacuate all personnel; us protective equipment for fire-fighting. Use self-contained breathing apparatus when the
Yes No Which Conditions: product is involved in fire.
Means of Protective Equipment Protective equipement.
Water spray only. for Firefighters
Extinction
SectION vI - accIdeNtal releaSe meaSureS SectION vII - haNdlINg aNd StOrage
Personal & Environmental Do not allow to enter sewers or drains that may lead Handling Avoid contact with eyes, skin and clothing.
Precautions to waterways. Precautions
Storage
Methods for
Wipe up with cloth, soap and water. Refrigerate when not in use.
Cleaning Requirements
SectION vIII - eXpOSure cONtrOlS/perSONal prOtectION
Eye
Respiratory S38: In case of insufficedint ventilation, wear suitable Use chemical splash goggles and face shield.
Protection
Protection respiratory equipment.
Hand Skin
Latex gloves. S36/37: Wear suitable protective clothing and gloves.
Protection Protection
SectION IX - phySIcal & chemIcal prOpertIeS
Melting
Solubility in
Appearance Clear gel. Completely. Not defined.
Point/Range
Water
None.
pH
Odor Flavored (Mint or Melon) ~6.5 Other Data
SectION X - StabIlIty aNd reactIvIty
Chemical Stability Conditions and Avoid strong bases, metals. Excess heat, exposure to moist air or Hazardous Decomposition
N/A
Yes No water. Products
Materials to Avoid
SectION XI - tOXIcOlOgIcal INfOrmatION
Route of Entry Skin Contact Skin Absorption Eye Contact Inhalation Acute Inhalation Chronic Ingestion
Effects and Symptoms Eye effects: May cause mild irritation. Skin effects: May cause slight irritation.
of Short-Term Exposure
Chronic Effects and Symptoms Eye effects: May cause mild irritation. Skin effects: May cause slight irritation.
of Long-Term Exposure
Irritancy
Sensitization Not defined. Slight.
of Product
SectION XII - ecOlOgIcal INfOrmatION SectION XIII - dISpOSal cONSIderatIONS
Method of
Biodegradability Not defined. Dispose of according to local and government regulations.
Waste Disposal
SectION XIv - traNSpOrt INfOrmatION SectION Xv - regulatOry INfOrmatION
R18: In use, may form flammable/explosive vapou-air mixture.
Not regulated.
EEC Oxidizer - "O"
SectION XvI - Other INfOrmatION
FOR DENTAL USE ONLY. Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturers knowledge) believed to be accurate;
however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability of the recommendation
and assumes no liability to any user thereof. Each user should review these recommendations in the specific context of the intended use and
determine whether they are appropriate. For unabriged copy of this MSDS please go to www.ultradent.com.
materIal Safety data Sheet Controlled Product Yes No
SectION I - IdeNtIfIcatION Of the SubStaNce/preparatION aNd Of the cOmpaNy/uNdertakINg
Material Manufactured by Ultradent Products, Inc.
Opalescence速 Whitening Toothpaste
Name
505 West 10200 South
South Jordan, Utah 84095 USA
Material
Dentifrice
Use
Emergency
1-800-552-5512 or 1-801-572-4200 (Outside USA)
Contact
Date EC Representative
June 2, 2006
Prepared by: Richard Tuttle, D.D.S.
SectION II - cOmpOSItION/INfOrmatION ON INgredIeNtS
Approximate LD50/LC50
Active Ingredients C.A.S. N.A. or U.N. Numbers
Concentration % Specify Species and Route
Sodium Fluoride .025% LD50 7060 mg/kg 007681-49-4
Oral ? Rabbit
SectION III - hazardS IdeNtIfIcatION
Adverse Human Effects
No adverse human effects.
and Symptoms
SectION Iv - fIrSt aId meaSureS
No specific treatment is necessary since this material is not likely Immediately flush eyes with plenty of water . Get medical attention
Eye
Inhalation
to be hzardous by inhalation. if irritation persists.
Contact
Ingestion Swallowing less than an ounce will not cause significant harm. For larger
Skin Wash with soap and water.
amounts, do not induce vomiting but give one or two glasses of water to drink
Contact
and get medical attention.
SectION v - fIre-fIghtINg meaSureS
Flammability If Yes, Under General: Evacuate all personnel; us protective equipment for fire-fighting. Use self-contained breathing apparatus when the
Yes No Which Conditions: product is involved in fire.
Means of Protective Equipment Protective equipement.
Water spray only. for Firefighters
Extinction
SectION vI - accIdeNtal releaSe meaSureS SectION vII - haNdlINg aNd StOrage
Personal & Environmental No data available. Contact enviromental department. Handling Store at local atmospheric pressure.
Precautions Precautions
Storage
Methods for
Wipe up with cloth, soap and water. Keep container closed to prevent dyring out.
Cleaning Requirements
SectION vIII - eXpOSure cONtrOlS/perSONal prOtectION
Eye
Respiratory Not applicable. Not applicable.
Protection
Protection
Hand Skin
Not applicable. Not applicable.
Protection Protection
SectION IX - phySIcal & chemIcal prOpertIeS
Melting
Solubility in
Appearance Mint green gel. Partial. N/A
Point/Range
Water
None.
pH
Odor Minty N/A Other Data
SectION X - StabIlIty aNd reactIvIty
Chemical Stability Conditions and Avoid heat, flames, ignition sources and incompatibles. Hazardous Decomposition
N/A
Yes No Products
Materials to Avoid
SectION XI - tOXIcOlOgIcal INfOrmatION
Route of Entry Skin Contact Skin Absorption Eye Contact Inhalation Acute Inhalation Chronic Ingestion
Effects and Symptoms Eye effects: May cause mild irritation. Skin effects: None expected.
of Short-Term Exposure
Chronic Effects and Symptoms Eye effects: May cause mild irritation. Skin effects: None expected.
of Long-Term Exposure
Irritancy
Sensitization Not defined. Slight.
of Product
SectION XII - ecOlOgIcal INfOrmatION SectION XIII - dISpOSal cONSIderatIONS
Method of
Biodegradability Not defined. Dispose of according to local and government regulations.
Waste Disposal
SectION XIv - traNSpOrt INfOrmatION SectION Xv - regulatOry INfOrmatION
Not classified.
Not regulated.
SectION XvI - Other INfOrmatION
FOR DENTAL USE ONLY. Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturers knowledge) believed to be accurate;
however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability of the recommendation
and assumes no liability to any user thereof. Each user should review these recommendations in the specific context of the intended use and
determine whether they are appropriate. For unabriged copy of this MSDS please go to www.ultradent.com.
materIal Safety data Sheet Controlled Product Yes No
SectION I - IdeNtIfIcatION Of the SubStaNce/preparatION aNd Of the cOmpaNy/uNdertakINg
Material Manufactured by Ultradent Products, Inc.
Ultradent速 LC Block-Out Resin
Name
505 West 10200 South
South Jordan, Utah 84095 USA
Material Dental laboratory use on stone models and dental
Use use intraorally. Emergency
1-800-552-5512 or 1-801-572-4200 (Outside USA)
Contact
Date June 2, 2006 EC Representative
Prepared by:
Richard Tuttle, D.D.S.
SectION II - cOmpOSItION/INfOrmatION ON INgredIeNtS
Approximate LD50/LC50
Active Ingredients C.A.S. N.A. or U.N. Numbers
Concentration % Specify Species and Route
Triethylene glycol dimethacrylate 16% N/A 109-16-0
SectION III - hazardS IdeNtIfIcatION
Adverse Human Effects
Not defined.
and Symptoms
SectION Iv - fIrSt aId meaSureS
Eye
Inhalation Flush with lots of water.
N/A Contact
Skin Ingestion
In large amounts, induce vomiting.
Wash with soap and water.
Contact
SectION v - fIre-fIghtINg meaSureS
Flammability
If Yes, Under
Avoid contact with flame.
Yes NoWhich Conditions:
Means of Protective Equipment Wear full protective clothing for chemicals and self-
CO2, dry chemical. contained breathing apparatus.
for Firefighters
Extinction
SectION vI - accIdeNtal releaSe meaSureS SectION vII - haNdlINg aNd StOrage
Personal & Environmental Handling
Not defined. Not defined.
Precautions Precautions
Storage
Methods for
Store at room temperature (dark, dry place).
Wipe up with dry cloth and alcohol.
Cleaning Requirements
SectION vIII - eXpOSure cONtrOlS/perSONal prOtectION
Respiratory Eye
Not applicable. Protective eyewear.
Protection Protection
Hand Skin
Latex gloves. Lab coat.
Protection Protection
SectION IX - phySIcal & chemIcal prOpertIeS
Melting
Solubility in
Appearance Dark blue gel. Insoluble. N/A
Point/Range
Water
N/A
Slight acrylic odor. None.
pH
Odor Other Data
SectION X - StabIlIty aNd reactIvIty
Chemical Stability Conditions and Hazardous Decomposition
Light exposure initiates polymerization. CO2
Yes No Materials to Avoid Products
SectION XI - tOXIcOlOgIcal INfOrmatION
Route of Entry Skin Contact Skin Absorption Eye Contact Inhalation Acute Inhalation Chronic Ingestion
Effects and Symptoms
Eye contact: May cause irritation.
of Short-Term Exposure
Chronic Effects and Symptoms
Eye contact: May cause irritation.
of Long-Term Exposure
Irritancy
Sensitization Not defined. Slight.
of Product
SectION XII - ecOlOgIcal INfOrmatION SectION XIII - dISpOSal cONSIderatIONS
Biodegradability Not defined. Method of
Dispose of according to local and government
Waste Disposal
regulations.
None.
Further Details
SectION XIv - traNSpOrt INfOrmatION SectION Xv - regulatOry INfOrmatION
N/A
Not regulated.
SectION XvI - Other INfOrmatION
FOR DENTAL USE ONLY. Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturers knowledge) believed to be accurate;
however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability of the recommendation
and assumes no liability to any user thereof. Each user should review these recommendations in the specific context of the intended use and
determine whether they are appropriate.
Shelf life of gel: 24 months
Refrigerate to maintain shelf life.
Opalescence 35% Opalescence Whitening Toothpaste LC Block-Out HAZARD RATING
Flammability Flammability
Flammability
4 = Severe
3 = Serious
0 0
0
2 = Moderate
Reactivity Reactivity
Reactivity Health Health
Health 1 0 1 1
1 1
1 = Slight
0 = Minimal
MSDS Included. MSDS Included.
MSDS Included.
For professional use only.
Keep out of reach of children.
For immediate reorder and/or complete descriptions of Ultradents product line,
refer to Ultradents catalog or call Toll Free: 1-800-552-5512.
Outside U.S. call (801) 572-4200
www.ultradent.com
Ultradent syringes have an expiration date stamped on the side of the syringe consisting of one letter and three numbers.
The letter is a lot number used for manufacturing purposes and the three numbers are the expiration date.
The first two numbers are the month, and the third number is the last number of the year.
息 Copyright 2006 Ultradent Products, Inc. All Rights Reserved.
U.S. Patent Nos.: 5,098,303; 5,234,342; 5,376,006; 5,409,631; 5,667,386; 5,725,843; 5,746,598; 5,759,037; 5,759,038; 5,770,105; 5,770,182;
5,846,058; 5,851,512; 5,855,870; 5,985,249; 6,036,943; 6,086,855; 6,183,251; 6,306,370; 6,309,625; 6,368,576; and 6,730,316.
Australian Patent No.: 654955. European Patent No.: 0522087. Japan Patent Nos.: 3113182 and 2909040. Canada Patent No.: 2078776.
Other U.S. and International Patents Granted and Pending.
505 West 10200 South
South Jordan, Utah 84095, USA #12500.1 090106
|