Description:
Consepsis庐 is a lightly flavored 2.0% chlorhexidine gluconate disinfecting solution.
Consepsis庐 & Note: Chlorhexidine hand soaps can adversely affect bond strength of dentin bonding agents.
Consepsis contains no surfactants or emolients that interfere with bond strength.
Consepsis庐 V
Consepsis庐 V is a lightly flavored 2.0% chlorhexidine gluconate disinfecting
Chlorhexidine solution that is more viscous than regular Consepsis. Consepsis V is specifically designed for
Antibacterial Solution endodontic disinfecting purposes only.
Indications:
Consepsis liquid is used before crown cementation (temporary and/or permanent) and for restorative preparations of crowns,
inlays, and composites. Consepsis is a demonstrated, quality wetting agent for bonding, and increasing bond strengths.1,2
Consepsis is recommended for procedural endodontic disinfection, as a final endodontic rinse prior to canal obturation (see
EndoREZ庐 instruction) and as an antimicrobial prior to pulpcapping.3 Consepsis helps prevent the
influx of micro-organisms into dentinal tubules.4 A clinician can reduce potential post-op pulpitis
and sensitivity by thoroughly cleaning and disinfecting preparations with Consepsis before sealing
and restoring.
Consepsis V鈥檚 viscosity enables the material to be placed and retained in the canal without quickly
running out.
Note: Do not use Consepsis or Consepsis V in a root canal which is wet with sodium hypochlorite,
as a brown precipitate will form.
Fig. 1 Hold plunger in palm of hand
Pre-Treatment Procedure: for optimal control.
A. Using 1.2ml prefilled syringes:
1. Remove Luer Lock cap from syringe.
2. Twist disposable tip firmly onto syringe:
Consepsis: Use a Black Mini庐 Brush tip or a Blue Mini庐 Dento-Infusor庐 tip.
3. For optimum control, hold syringe in palm of hand rather than in conventional manner with
thumb on plunger (Fig. 1).
B. Using 30ml IndiSpense庐 System:
1. A prelabeled unit dose syringe is attached to the end of the large, no-waste IndiSpense
syringe by turning the Luer Lock of the unit dose syringe snugly onto the male thread of the
IndiSpense (Fig. 2).
2. Using the palm grasp (Fig. 3) the plunger of the IndiSpense syringe is depressed while the
unit dose syringe is stabilized at the plunger with the non-dominant hand.
To prevent cross-contamination, a used syringe should not be reattached to the IndiSpense Figs. 2 & 3 A 1.2ml unit dose
syringe. Do not express contents of unit dose syringe back into the IndiSpense syringe. syringe is twisted firmly onto the
3. If not using the pre-loaded syringe immediately, replace Luer Lock cap until ready for IndiSpense syringe. Slightly depress
use. plunger of IndiSpense and fill unit
4. Before use, twist recommended tip firmly onto the unit dose syringe.(Tip recommendation: dose syringe to desired level.
Consepsis: See A.2. Above, Consepsis V: Black Micro庐 FX or Inspiral庐 Brush Tip.)
Procedure:
A. Consepsis
1. When placing direct-placed or resin-luted
restorations, etch the surfaces to be bonded
before applying Consepsis. Dispense a small
amount of Consepsis and thoroughly rub
preparation (Figs. 4 and 5). Air dry. Do not rinse.
Note: Some clinicians instruct to etch, disinfect,
and then apply bonding primers. Our tests have
demonstrated no reduction in bond strength
whether Consepsis is placed before or after
etching. Our testing has also shown a slight gain
Fig. 4 Preparations are disinfected by
in bond strength by moistening dentin with Consepsis Fig. 5 With the Blue Mini Dento-Infusor
followed by removal of excess moisture on surface only applying Consepsis with a Black Mini tip attached, disinfect preparation with
Brush tip. Consepsis liquid before temporary
and placement of A/B Primers. cementation.
2. Remove excess fluid to obtain a
moist dentin surface (for recommended 鈥渨et鈥? bonding techniques see PQ1庐 or
PermaQuick庐 bonding systems instructions).
3. Continue with appropriate bonding technique according to instructions.
Consepsis Treatment Notes:
1. For composite and amalgam preparations, etc., treat surfaces the same as temporary crown cementation. Place appropriate
dentin liner and/or base as needed (Ultra-Blend庐 plus鈩? is recommended).
2. For composites, resin luting, amalgams, and glass ionomers, disinfect before or after etching and bonding with a quality
bonding agent such as PQ1 or PermaQuick.
3. For disinfecting close to pulp, gently scrub with Consepsis liquid for 60 seconds. Gently air dry (don鈥檛 rinse). Follow with
application of Ultra-Blend plus, Ultra-Etch庐 35% phosphoric acid and a bonding agent to seal the dentin.5
Use all materials according to their instructions.
B. Consepsis V
1. Upon completion of cleaning and shaping canals, rinse with Consepsis V. Leave Consepsis V in canals for 60 seconds.
2. Rinse thoroughly with sterile water, or EDTA.
3. Dry completely with Ultradent Luer Vacuum Adapter and paper points.
4. Obturate with materials of choice.
Consepsis/Consepsis V Precautions:
1. Tips are disposable; do not reuse.
2. Do NOT allow volumes of material to be ingested. Collect extraneous material with proper vacuuming techniques.
3. DO NOT use on patients with known sensitivity to chlorhexidine.
4. Use Ultradent庐 Syringe Covers for a protective barrier to prevent cross-contamination.
5. Consepsis V is specifically desgined for endodontic disinfecting purposes only.
1 Cao, D., Hollis, R., Christensen, G.J., Christensen, R.P., 鈥淓ffect of Tooth Disinfecting Procedures on Dentin Shear Bond Strength,鈥? Journal of Dental Research, Vol. 74 (AADR Abstract #493)
CRA reports to IADR (AADR) San Antonio Meeting, March 1995.
2 Dickinson, G., Smith, C., Morris, C., Murphy, S., 鈥淣ew Univesral Bonding Systems for Aesthetic Restorations,鈥? Practical Periodontics & Aesthetic Dentistry, June/July 1995.
3 鈥淐linically Significant Research,鈥? Clinical Research Associates Newsletter, Volume 18, Issue 4, April 1994.
4 Br盲nnstr枚m, M. 鈥淚nfection beneath composite resin restoration: Can it be avoided?鈥? Operative Dentistry, Autumn, 1987:12(4); 158-163.
5 Pameijer, C., D.M.D., PhD., Histopathlogy Study with Ultra-Blend, 1998 (unpublished).
materIal Safety data Sheet Controlled Product Yes No
SectION I - IdeNtIfIcatION Of the SubStaNce/preparatION aNd Of the cOmpaNy/uNdertakINg
Material Manufactured by Ultradent Products, Inc.
Consepsis庐 & Consepsis庐 V
Name
505 West 10200 South
South Jordan, Utah 84095 USA
Material
Cleaning and disinfecting agent.
Use
Emergency
1-800-552-5512 or 1-801-572-4200 (Outside USA)
Contact
Date EC Representative
April 11, 2006
Prepared by: Iris McCallister
SectION II - cOmpOSItION/INfOrmatION ON INgredIeNtS
Approximate LD50/LC50
Active Ingredients C.A.S. N.A. or U.N. Numbers
Concentration % Specify Species and Route
Chlorhexidine Gluconate 2% No toxic effect noted 18472-51-0
SectION III - hazardS IdeNtIfIcatION
Adverse Human Effects May dry out skin.
and Symptoms
SectION Iv - fIrSt aId meaSureS
Immediately flush eyes with plenty of water for at least 15
Inhalation N/A Eye
minutes. Get immediate medical attention.
Contact
If large amounts are swallowed, give 3-4 glasses of water.
Skin Ingestion
Wash with soap and water. Get medical attention if irriation
Contact develops or persists.
SectION v - fIre-fIghtINg meaSureS
Flammability If Yes, Under
Yes No Which Conditions:
Means of Protective Equipment
N/A
N/A for Firefighters
Extinction
SectION vI - accIdeNtal releaSe meaSureS SectION vII - haNdlINg aNd StOrage
Handling
Personal & Environmental None
Use suitable protective equipment.
Precautions
Precautions
Storage
Methods for Wipe up with cloth and water. Store at room temperature.
Cleaning Requirements
SectION vIII - eXpOSure cONtrOlS/perSONal prOtectION
Respiratory Eye
N/A Safety glasses.
Protection Protection
Hand Skin
Wear suitable protective clothing and gloves. Wear suitable protective clothing and gloves.
Protection Protection
SectION IX - phySIcal & chemIcal prOpertIeS
Melting
Solubility in
Appearance Consepsis: Light green liquid. Consepsis V: Light green gel. Completely Not defined
Point/Range
Water
N/A
Other Data
pH
Odor
Mint odor ~ 6.0
SectION X - StabIlIty aNd reactIvIty
Chemical Stability Conditions and Hazardous Decomposition
N/A Ammonia, hydrogen chloride, oxides of
Yes No Materials to Avoid Products carbon and nitrogen
SectION XI - tOXIcOlOgIcal INfOrmatION
Route of Entry Skin Contact Skin Absorption Eye Contact Inhalation Acute Inhalation Chronic Ingestion
Effects and Symptoms
Eye: May be mildly irritating to eyes. Skin: May cause slight irritation.
of Short-Term Exposure
Chronic Effects and Symptoms
Skin: Irritation. Eye: Irritation. Ingestion: Irritation.
of Long-Term Exposure
Irritancy Slight.
Sensitization N/A
of Product
SectION XII - ecOlOgIcal INfOrmatION SectION XIII - dISpOSal cONSIderatIONS
Method of
Yes
Biodegradability
Dispose of in compliance with governmental
Waste Disposal
regulation (ED 1975L0442-20/11/2003)
None
Further Details
SectION XIv - traNSpOrt INfOrmatION SectION Xv - regulatOry INfOrmatION
Not defined.
Not regulated.
SectION XvI - Other INfOrmatION
FOR DENTAL USE ONLY. Use as directed.
The information and recommendations are taken from sources (raw material MSDS(s) and manufacturer鈥檚 knowledge) believed to be accurate;
however, Ultradent Products, Inc., makes no warranty with respect to the accuracy of the information or the suitability of the recommendation
and assumes no liability to any user thereof. Each user should review these recommendations in the specific context of the intended use and
determine whether they are appropriate.
Ultradent syringes have an expiration date stamped on the side of the syringe consisting of one letter and three numbers.
The letter is a lot number used for manufacturing purposes and the three numbers are the expiration date.
The first two numbers are the month, and the third number is the last number of the year.
Consepsis & Consepsis V
HAZARD RATING
Flammability
4 = Severe
0
3 = Serious
0
1
Health Reactivity
2 = Moderate
1 = Slight
0 = Minimal
MSDS Included
Store at room temperature.
Consepsis Shelf life: 48 months
Consepsis V Shelf life: 24 months
U.S. Federal law restricts this device to sale by or on the order of a
State licensed dental professional.
Keep out of reach of children.
For immediate reorder and/or complete descriptions of Ultradent鈥檚 product line,
refer to Ultradent鈥檚 catalog or call Toll Free 1-800-552-5512.
Outside U.S. call (801) 572-4200, or visit www.ultradent.com.
漏 Copyright 2006 Ultradent Products, Inc. All Rights Reserved.
505 West 10200 South,
South Jordan, Utah 84095, USA
#16024.3 053006
|