Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Section 1 - Chemical Product and Company Identification
Product Name Spunbond OMEGA Series Products
CAS# Mixture/None Assigned
Generic Name Organic Spunbond
Formula Mixture
Chemical Name: Mixture
Hazard Label PET-002
Manufacturer Information
Johns Manville Engineered Products Group Telephone: 303-978-2000 8:00AM-5:00PM M-F
Mats and Reinforcements Division Internet Address: http://www.jm.com
P.O. Box 5108 Emergency: 800-424-9300 (Chemtrec, in English)
Denver, CO 80127 USA
Trade Names: Spunbond OMEGA Series Products
Section 2 - Composition / Information on Ingredients
CAS # Component Percent
25038-59-9 Polyethylene terephthalate polymer (PET) 100
100-40-3 4-Vinylcyclohexene <0.01
100-42-5 Styrene <0.01
106-99-0 1,3-Butadiene <0.01
107-13-1 Acrylonitrile <0.01
108-05-4 Vinyl acetate <0.01
50-00-0 Formaldehyde <0.01
79-06-1 Acrylamide <0.01
67-56-1 Methyl alcohol *
74-82-8 Methane *
74-85-1 Ethylene *
75-07-0 Acetaldehyde *
Additional Component Information
Heating these materials may volatilize the residual moisture and surface finish.
* May be released during thermal decomposition of these products when heated to temperatures above 248掳F (120掳C).
Section 3 - Hazards Identification
Emergency Overview
APPEARANCE AND ODOR: Plastic filaments in a variety of colors. No significant odor.
Under normal conditions of use and handling, this product is not expected to create any health or safety hazards.
Potential Health Effects
Summary
Exposure to vapors from this product may be irritating to eyes, respiratory passages and mucous membranes. Excessive skin
contact may cause severe irritation and dryness.
When subjected to high heat and humidity, this product may release formaldehyde gas. Formaldehyde is irritating to the eyes
and respiratory system and is known to cause nasopharyngeal cancer (based on animal and human studies). Formaldehyde
may cause skin or respiratory sensitization (allergy).
Inhalation
Irritation of the upper respiratory tract may occur in extreme exposures when heating these products.
____________________________________________________________
Page 1 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Skin
Molten resin will cause thermal burns. Allergic skin reaction may occur, with inflammation, redness, and irritation such as
burning, itching, or rash.
Absorption
Formaldehyde is a skin sensitizer and may lead to an allergic reaction in some individuals.
Ingestion
This product is not intended to be ingested (eaten). If ingested, it may cause temporary irritation to the gastrointestinal
(digestive) tract.
Eyes
Temporary irritation (itching) or redness may occur.
Primary Routes of Entry (Exposure)
Inhalation, skin, and eye contact.
Target Organs
Eyes, skin, respiratory system and central nervous system.
Section 4 - First Aid Measures
First Aid: Inhalation
Remove to fresh air. Drink water to clear throat, and blow nose to remove dust.
First Aid: Skin
If contact with molten resin occurs the affected area should be flushed with plenty of water. Prompt medical attention is
advised for burns.
First Aid: Ingestion
Product is not intended to be ingested or eaten. If this product is ingested, severe irritation of the gastrointestinal (GI) tract may
occur, and should be treated symptomatically. Seek medical attention.
First Aid: Eyes
Flush eyes with large amounts of water for 5-15 minutes. If irritation develops, or persists, seek medical attention.
First Aid: Notes to Physician
Not applicable
Section 5 - Fire Fighting Measures
Flash Point: 175-194潞C/347-381潞F Method Used: ISO 259
Upper Flammable Limit (UFL): Not determined Lower Flammable Limit (LFL): Not determined
Auto Ignition: >177潞C/>347潞F Flammability Classification: Not determined
Rate of Burning: Not determined
General Fire Hazards
If water is used, it should be used in very large quantities. The reaction between water and isocyanate may be vigorous. If
possible, contain fire run-off water.
Hazardous Combustion Products
Organic spunbond can burn if exposed to fire. By fire or thermal decomposition: carbon monoxide (CO), carbon dioxide (CO2),
oxides of nitrogen (NOx), and traces of acetaldehyde may be produced. Decomposition may begin at temperatures of
approximately 248掳F (120掳C) and above.
Extinguishing Media
Carbon dioxide (CO2), dry chemical, or foam. For large scale fires, alcohol-resistant foams are preferred, if available. General
purpose synthetic foams or protein foams may function, but much less effectively. If water is used, it should be used in very
large quantities. If possible, contain fire run-off water.
Down-wind personnel must be evacuated.
Fire Fighting Equipment/Instructions
Use NIOSH-approved self-contained breathing apparatus with full-facepiece operated in the pressure demand mode and full
fire fighting protective clothing. Avoid inhalation of vapors.
Section 6 - Accidental Release Measures
Containment Procedures
No special procedures necessary
____________________________________________________________
Page 2 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Clean-Up Procedures
Wastes are not hazardous as defined by the Resource Conservation and Recovery Act (RCRA; 40 CFR 261). Comply with
state and local regulations for disposal of these products. If you are unsure of the regulations, contact your local Public Health
Department, or the local office of the Environmental Protection Agency (EPA).
Section 7 - Handling and Storage
Handling Procedures
Customary personal hygiene measures, such as washing hands after working with these products are recommended.
Storage Procedures
No special precautions are required.
Section 8 - Exposure Controls / Personal Protection
Exposure Guidelines
A: General Product Information
No information available for the product.
B: Component Exposure Limits
Styrene (100-42-5)
ACGIH: 20 ppm TWA
40 ppm STEL
OSHA: 50 ppm TWA; 215 mg/m3 TWA
100 ppm STEL; 425 mg/m3 STEL
1,3-Butadiene (106-99-0)
ACGIH: 2 ppm TWA
OSHA: 1 ppm TWA (8 hr); 5 ppm STEL (15 min); 0.5 ppm Action Level (See 29 CFR 1910.1051)
Acrylonitrile (107-13-1)
ACGIH: 2 ppm TWA
Skin - potential significant contribution to overall exposure by the cutaneous route
OSHA: 2 ppm PEL; 10 ppm Excursion Limit (15 min); 1 ppm Action Level (skin and eye exposure
prohibited. Cancer hazard - see 29 CFR 1910.1045)
Vinyl acetate (108-05-4)
ACGIH: 10 ppm TWA
15 ppm STEL
OSHA: 10 ppm TWA; 30 mg/m3 TWA
20 ppm STEL; 60 mg/m3 STEL
4-Vinylcyclohexene (100-40-3)
ACGIH: 0.1 ppm TWA
Formaldehyde (50-00-0)
ACGIH: 0.3 ppm Ceiling
OSHA: 0.75 ppm TWA; 2 ppm STEL; 0.5 ppm Action Level (Irritant and potential cancer hazard - see 29
CFR 1910.1048)
Acrylamide (79-06-1)
ACGIH: 0.03 mg/m3 TWA (inhalable fraction and vapor)
Skin - potential significant contribution to overall exposure by the cutaneous route
OSHA: 0.03 mg/m3 TWA
Prevent or reduce skin absorption
Methane (74-82-8)
ACGIH: 1000 ppm TWA (listed under aliphatic hydrocarbon gases alkane C1-C4)
Ethylene (74-85-1)
ACGIH: 200 ppm TWA
____________________________________________________________
Page 3 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Acetaldehyde (75-07-0)
ACGIH: 25 ppm Ceiling
OSHA: 100 ppm TWA; 180 mg/m3 TWA
150 ppm STEL; 270 mg/m3 STEL
Methyl alcohol (67-56-1)
ACGIH: 200 ppm TWA
250 ppm STEL
Skin - potential significant contribution to overall exposure by the cutaneous route
OSHA: 200 ppm TWA; 260 mg/m3 TWA
250 ppm STEL; 325 mg/m3 STEL
Prevent or reduce skin absorption
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Wear safety glasses with side shields.
Personal Protective Equipment: Skin
Leather or cotton gloves are recommended.
Personal Protective Equipment: Respiratory
Respiratory protection is not required if mechanical or dilution ventilation is sufficient to keep the exposure levels below the
applicable exposure limits. If vapor levels are above the applicable exposure limits, a NIOSH-approved organic vapor
respirator must be provided and worn.
Ventilation
If vapor or mist is generated during processing or use, local exhaust ventilation should be provided to maintain exposures
below the applicable limits. The need for ventilation systems should be evaluated by a professional industrial hygienist, while
the design of specific ventilation systems should be conducted by a professional engineer.
Personal Protective Equipment: General
Loose-fitting, long-sleeved clothing should be worn to protect the skin from irritation. Exposed skin areas should be washed
with soap and warm water after handling.
Section 9 - Physical & Chemical Properties
Appearance: Odor:
Plastic pieces in a variety of colors Odorless
Physical State: pH:
Solid Not determined
Vapor Pressure: Vapor Density:
4.5 mm Hg (210潞C/410潞F) Not determined
Boiling Point: Melting Point:
210-260潞C/410-500潞F 40-260潞C/104-500潞F
Solubility (H2O): Specific Gravity:
Nil 0.95-1.45
Solids Content Evaporation Rate:
100 Not determined
Viscosity: Percent Volatile:
Not determined Not determined
VOC: Not determined
Section 10 - Chemical Stability & Reactivity Information
Chemical Stability
This is a stable material.
Chemical Stability: Conditions to Avoid
Decomposition may begin at temperatures of approximately 248掳F (120掳C) and above. Slight decomposition may occur above
the melting point.
Incompatibility
Amines, strong bases, alcohols.
Hazardous Decomposition
Organic spunbond can burn if exposed to fire. By fire or thermal decomposition: carbon monoxide (CO), carbon dioxide (CO2),
oxides of nitrogen (NOx), and traces of acetaldehyde may be produced. Decomposition may begin at temperatures of
approximately 248掳F (120掳C) and above.
Hazardous Polymerization
Will not occur.
____________________________________________________________
Page 4 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Section 11 - Toxicological Information
Acute Toxicity
A: General Product Information
Excessive exposure to the vapor from this product is irritating to the eyes, skin, and respiratory tract. It may cause fatigue,
weakness, confusion, headache, dizziness, and drowsiness. Very high concentrations are anesthetic and may have other
central nervous system effects, including death. Repeated or prolonged exposure will defat the skin, causing drying, cracking,
and dermatitis and may cause blistering.
B: Component Analysis - LD50/LC50
Styrene (100-42-5)
Inhalation LC50 Rat: 11.8 mg/L/4H; Oral LD50 Rat: 1000 mg/kg
1,3-Butadiene (106-99-0)
Inhalation LC50 Rat: 485 mg/L/4H; Oral LD50 Rat: 5480 mg/kg
Acrylonitrile (107-13-1)
Inhalation LC50 Rat: 333 ppm/4H; Oral LD50 Rat: 78 mg/kg; Dermal LD50 Rat: 148 mg/kg; Dermal LD50 Rabbit: 250 mg/kg
Vinyl acetate (108-05-4)
Inhalation LC50 Rat: 11.4 mg/L/4H; Inhalation LC50 Rat: 3200 ppm/4H; Oral LD50 Rat: 2920 mg/kg; Dermal LD50 Rabbit:
2320 mg/kg
4-Vinylcyclohexene (100-40-3)
Oral LD50 Rat: 3080 碌L/kg; Dermal LD50 Rabbit: 20 mL/kg
Formaldehyde (50-00-0)
Inhalation LC50 Rat: 0.578 mg/L/4H; Inhalation LC50 Rat: 250 ppm/4H; Oral LD50 Rat: 100 mg/kg; Dermal LD50 Rabbit: 270
mg/kg
Acrylamide (79-06-1)
Oral LD50 Rat: 124 mg/kg; Dermal LD50 Rat: 400 mg/kg; Dermal LD50 Rabbit: 1680 碌L/kg
Acetaldehyde (75-07-0)
Inhalation LC50 Rat: 13300 mg/kg/4H; Oral LD50 Rat: 661 mg/kg; Dermal LD50 Rabbit: 3540 mg/kg
Methyl alcohol (67-56-1)
Inhalation LC50 Rat: 83.2 mg/L/4H; Inhalation LC50 Rat: 64000 ppm/4H; Oral LD50 Rat: 5628 mg/kg; Dermal LD50 Rabbit:
15800 mg/kg
Carcinogenicity
A: General Product Information
The Occupational Safety and Health Administration (OSHA), National Toxicology Program (NTP), International Agency for
Research on Cancer (IARC), and American Conference of Governmental Industrial Hygienists (ACGIH) have not classified
this product as a carcinogen.
B: Component Carcinogenicity
Styrene (100-42-5)
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 60, 1994; Monograph 82, 2002.
Overall evaluation upgraded from 3 to 2B with supporting evidence from other data relevant to
the evaluation of carcinogenicity and its mechanisms)
1,3-Butadiene (106-99-0)
ACGIH: A2 - Suspected Human Carcinogen
OSHA: 1 ppm TWA (8 hr); 5 ppm STEL (15 min); 0.5 ppm Action Level (See 29 CFR 1910.1051)
NTP: Known Carcinogen (Select Carcinogen)
IARC: Group 2A - Probably Carcinogenic to Humans (IARC Monograph 71, 1999)
____________________________________________________________
Page 5 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Acrylonitrile (107-13-1)
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to humans
OSHA: 2 ppm PEL; 10 ppm Excursion Limit (15 min); 1 ppm Action Level (skin and eye exposure
prohibited. Cancer hazard - see 29 CFR 1910.1045)
NTP: Reasonably Anticipated To Be A Carcinogen (Possible Select Carcinogen)
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 71, 1999)
Vinyl acetate (108-05-4)
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to humans
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 63, 1995)
4-Vinylcyclohexene (100-40-3)
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to humans
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 60, 1994)
Formaldehyde (50-00-0)
ACGIH: A2 - Suspected Human Carcinogen
OSHA: 0.75 ppm TWA; 2 ppm STEL; 0.5 ppm Action Level (Irritant and potential cancer hazard - see 29
CFR 1910.1048)
NTP: Reasonably Anticipated To Be A Carcinogen (Possible Select Carcinogen)
IARC: Group 1 - Known Human Carcinogen (IARC Monograph 88, 2004)
Acrylamide (79-06-1)
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to humans
NTP: Reasonably Anticipated To Be A Carcinogen (Possible Select Carcinogen)
IARC: Group 2A - Probably Carcinogenic to Humans (IARC Monograph 60, 1994. Overall evaluation
upgraded from 2B to 2A with supporting evidence from other data relevant to the evaluation of
carcinogenicity and its mechanisms)
Ethylene (74-85-1)
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 3 - Not Classifiable (IARC Monograph 60, 1994)
Acetaldehyde (75-07-0)
ACGIH: A3 - Confirmed animal carcinogen with unknown relevance to humans
NTP: Reasonably Anticipated To Be A Carcinogen (Possible Select Carcinogen)
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 71, 1999; Supplement 7, 1987;
Monograph 36, 1985)
Chronic Toxicity
No long-term health hazards are associated with this product. Decomposition may begin at temperatures of approximately
248掳F (120掳C) and above.
PRODUCTS OF THERMAL DECOMPOSITION:
Acetaldehyde: If the material is heated above 350掳F (177掳C) acetaldehyde may be generated. Symptoms of exposure may
include chest tightness, wheezing, coughing, and shortness of breath. Effects can be delayed. Overexposure can cause lung
damage, including decreased lung function. Prolonged or repeated skin contact may cause irritation leading to dermatitis. Skin
sensitization may also occur. In animals acetaldehyde has caused: kidney, reproductive, teratogenic effects.
Exposure to formaldehyde gas (released under conditions of high heat or humidity) may cause eye and upper respiratory
irritation, and possible respiratory or skin sensitization (allergy). If sensitization occurs, subsequent exposures to formaldehyde
may worsen asthma or other respiratory problems, and cause allergic-type reactions.
Exposure to formaldehyde gas has been associated with the development of nasopharyngeal cancer in laboratory animals and
humans. Formaldehyde has been classified as a known human carcinogen, Group 1, by the International Agency for Research
on Cancer (IARC). The US Occupational Safety and Health Administration (OSHA) and the US National Toxicology Program
(NTP) consider formaldehyde to have carcinogenic potential. OSHA specifically regulates formaldehyde under 29 CFR
1910.1048.
____________________________________________________________
Page 6 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Section 12 - Ecological Information
Ecotoxicity
A: General Product Information
No data available for this product.
B: Component Analysis - Ecotoxicity - Aquatic Toxicity
Styrene (100-42-5)
96 Hr LC50 fathead minnow: 4.02 mg/L (flow-through);96 Hr LC50 bluegill: 25.05 mg/L (static);96 Hr LC50 goldfish: 64.74
mg/L (static)
5 min EC50 Photobacterium phosphoreum: 5.4 mg/L
48 Hr EC50 water flea: 23.0 mg/L
1,3-Butadiene (106-99-0)
24 Hr LC50 pinperch: 71.5 mg/L
Acrylonitrile (107-13-1)
96 Hr LC50 fathead minnow: 10.10 mg/L (flow-through);96 Hr LC50 bluegill: 11.80 mg/L (static);96 Hr LC50 guppy:33.50 mg/L
(static)
5 min EC50 Photobacterium phosphoreum: 495 mg/L; 15 min EC50 Photobacterium phosphoreum: 367 mg/L; 30 min EC50
Photobacterium phosphoreum: 254 mg/L
48 Hr LC50 water flea: 7.60 mg/L
Vinyl acetate (108-05-4)
96 Hr LC50 fathead minnow: 31.0 mg/L;96 Hr LC50 bluegill: 31.0 mg/L;96 Hr LC50 goldfish:31.0 mg/L
24 Hr EC50 water flea: 52.0 mg/L
Formaldehyde (50-00-0)
96 Hr LC50 fathead minnow: 24.1 mg/L (flow-through);96 Hr LC50 bluegill: 0.10 mg/L (flow-through)
5 min EC50 Photobacterium phosphoreum: 9.0 mg/L; 15 min EC50 Photobacterium phosphoreum: 7.26 mg/L; 25 min EC50
Photobacterium phosphoreum: 6.81 mg/L
96 Hr EC50 water flea: 20 mg/L
Acrylamide (79-06-1)
96 Hr LC50 fathead minnow: 109 mg/L (flow-through)
Acetaldehyde (75-07-0)
96 Hr LC50 fathead minnow: 37.2 mg/L (flow-through);96 Hr LC50 bluegill sunfish:53 mg/L
5 min EC50 Photobacterium phosphoreum: 280.6 mg/L; 15 min EC50 Photobacterium phosphoreum: 280.6 mg/L; 25 min
EC50 Photobacterium phosphoreum: 280.6 mg/L
48 Hr EC50 water flea: 9000 mg/L
Methyl alcohol (67-56-1)
96 Hr LC50 fathead minnow (28 days old):29400 mg/L (flow-through);96 Hr LC50 rainbow trout (fingerling):13 mg/L;48 Hr
LC50 trout: 8000 mg/L
5 min EC50 Photobacterium phosphoreum: 43000 mg/L; 15 min EC50 Photobacterium phosphoreum: 40000 mg/L; 25 min
EC50 Photobacterium phosphoreum: 39000 mg/L
Section 13 - Disposal Considerations
US EPA Waste Number & Descriptions
A: General Product Information
Wastes are not hazardous as defined by the Resource Conservation and Recovery Act (RCRA; 40 CFR 261). Comply with
state and local regulations for disposal of solid wastes. If you are unsure of the regulations, contact your local Public Health
Department, or the local offices of the Environmental Protection Agency (EPA).
B: Component Waste Numbers
No EPA Waste Numbers are applicable for this product's components.
Disposal Instructions
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
____________________________________________________________
Page 7 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Section 14 - Transportation Information
Shipping Name: This product is not classified as a hazardous material for transport.
International Transportation Regulations
This product is not classified as a hazardous material for transport.
Section 15 - Regulatory Information
US Federal Regulations
A: General Product Information
SARA 311/312: This product is not classified as hazardous under SARA 311/312.
B: Component Analysis
This material contains one or more of the following chemicals required to be identified under SARA Section 302 (40 CFR 355
Appendix A), SARA Section 313 (40 CFR 372.65) and/or CERCLA (40 CFR 302.4).
Styrene (100-42-5)
CERCLA: 1000 lb final RQ; 454 kg final RQ
1,3-Butadiene (106-99-0)
CERCLA: 10 lb final RQ; 4.54 kg final RQ
Acrylonitrile (107-13-1)
SARA 302: 10000 lb TPQ
CERCLA: 100 lb final RQ; 45.4 kg final RQ
Vinyl acetate (108-05-4)
SARA 302: 1000 lb TPQ
CERCLA: 5000 lb final RQ; 2270 kg final RQ
Formaldehyde (50-00-0)
SARA 302: 500 lb TPQ
CERCLA: 100 lb final RQ; 45.4 kg final RQ
Acrylamide (79-06-1)
SARA 302: 1000 lb TPQ (lower threshold); 10000 lb TPQ (upper threshold)
CERCLA: 5000 lb final RQ; 2270 kg final RQ
Acetaldehyde (75-07-0)
CERCLA: 1000 lb final RQ; 454 kg final RQ
Methyl alcohol (67-56-1)
CERCLA: 5000 lb final RQ; 2270 kg final RQ
State Regulations
A: General Product Information
Other state regulations may apply. Check individual state requirements.
____________________________________________________________
Page 8 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
B: Component Analysis - State
The following components appear on one or more of the following state hazardous substances lists:
Component CAS # CA FL MA MN NJ PA
Styrene 100-42-5 Yes No Yes Yes Yes Yes
1,3-Butadiene 106-99-0 Yes No Yes Yes Yes Yes
Acrylonitrile 107-13-1 Yes No Yes Yes Yes Yes
Vinyl acetate 108-05-4 Yes No Yes Yes Yes Yes
4-Vinylcyclohexene 100-40-3 Yes No Yes Yes No Yes
Formaldehyde 50-00-0 Yes No Yes Yes Yes Yes
Acrylamide 79-06-1 Yes No Yes Yes Yes Yes
Methane 74-82-8 No No Yes Yes Yes Yes
Ethylene 74-85-1 No No Yes Yes Yes Yes
Acetaldehyde 75-07-0 Yes No Yes Yes Yes Yes
Methyl alcohol 67-56-1 Yes No Yes Yes Yes Yes
The following statement(s) are provided under the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65):
WARNING! This product contains a chemical known to the state of California to cause cancer.
1,3 Butadiene CAS# 106-99-0
Acrylonitrile CAS# 107-13-1
4-Vinylcyclohexene CAS# 100-40-3
Formaldehyde CAS# 50-00-0
Acrylamide CAS# 79-06-1
Acetaldehyde CAS# 75-07-0
WARNING! This product contains a chemical known to the state of California to cause reproductive/developmental effects.
1,3 Butadiene CAS# 106-99-0
A: TSCA Status
This product and its components are listed on the TSCA 8(b) inventory.
None of the components listed in this product are listed on the TSCA Export Notification 12(b) list.
B: Component Analysis - Inventory
Component CAS # TSCA DSL EINECS
Polyethylene terephthalate polymer (PET) 25038-59-9 Yes Yes No
Styrene 100-42-5 Yes Yes Yes
1,3-Butadiene 106-99-0 Yes Yes Yes
Acrylonitrile 107-13-1 Yes Yes Yes
Vinyl acetate 108-05-4 Yes Yes Yes
4-Vinylcyclohexene 100-40-3 Yes Yes Yes
Formaldehyde 50-00-0 Yes Yes Yes
Acrylamide 79-06-1 Yes Yes Yes
Methane 74-82-8 Yes Yes Yes
Ethylene 74-85-1 Yes Yes Yes
Acetaldehyde 75-07-0 Yes Yes Yes
Methyl alcohol 67-56-1 Yes Yes Yes
Component Analysis - WHMIS IDL
No components are listed in the WHMIS IDL.
Section 16 - Other Information
Other Information
Prepared for:
Johns Manville Engineered Products Group
Mats & Reinforcements Division
P.O. Box 5108
Denver, CO 80217-5108
Prepared by:
____________________________________________________________
Page 9 of 10 Issue Date: 07/19/2005 Revision: 1.0203
Material Name: Spunbond OMEGA Series Products Material Safety Data
Sheet ID: 2207
Johns Manville Technical Center
P.O. Box 625005
Littleton, CO USA 80162-5005
The information herein is presented in good faith and believed to be accurate as of the effective date given. However, no
warranty, expressed or implied, is given. It is the buyer's responsibility to ensure that its activities comply with Federal, State or
provincial, and local laws.
Date MSDS # Reason
05/04/01 2207-1.0000 Original issue
04/14/03 2207-1.0001 Section 15: TSCA 12b: delete vinylcyclohexene; has been delisted
from TSCA 12b.
10/22/03 2207-1.0002 Section 15, TSCA 12b, Acrylamide is deleted
05/07/04 2207-1.0003 Sect. 13 waste edit. Regulatory update. Minor edits.
07/06/04 2207-1.0004 Sect. 11 Formaldehyde IARC update from 2A to 1.
07/19/05 2207-1.0005 Regulatory update: Sections 8, 11, 12, and 15
This is the end of MSDS # 2207
____________________________________________________________
Page 10 of 10 Issue Date: 07/19/2005 Revision: 1.0203
|