Material Name: Material Safety Data
Continuous Filament Glass Fiber Mat with Acrylic Binder Sheet ID: 2401
Section 1 - Chemical Product and Company Identification
Product Name Fiber Glass Mat
CAS# None Assigned
Generic Name Fiber Glass Mat
Formula Not Applicable
Chemical Name: Article
Hazard Label CF-01 or L2401
Manufacturer Information
Johns Manville Engineered Products Group Telephone: 303-978-2000 8:00AM-5:00PM M-F
Mats and Reinforcements Division Internet Address: http://www.jm.com
P.O. Box 5108 Emergency: 800-424-9300 (Chemtrec, in English)
Denver, CO 80127 USA
Trade Names: Dura-Glass庐 8200 Series Mats
Section 2 - Composition / Information on Ingredients
CAS # Component Percent
65997-17-3 Continuous filament glass fibers 50-85
Proprietary Acrylic Binder (salt of Polycarboxylic Acid) 15-30
1333-86-4 Carbon black (bound) 0-30*
55918-56-4 Polyester Fiber 0-15**
13463-67-7 Titanium dioxide (colorant) 0-2
Additional Component Information
* In black or gray products only. Note: Due to the product form, exposures to hazardous dusts or fumes are not expected to
occur. Exposure limits are given for reference only.
**Component of 8221 mat and 8229 mats only.
Section 3 - Hazards Identification
Emergency Overview
APPEARANCE AND ODOR: Black, gray, or white glass fiber web or mat. No significant odor.
Nuisance dust released during cutting of product may potentially irritate respiratory tract, skin, and eyes.
Potential Health Effects
Inhalation
Inhalation (breathing dust), skin, and eye contact.
Skin
Temporary irritation (itching) or redness may occur.
Absorption
Not applicable
Ingestion
This product is not intended to be ingested (eaten). If ingested, it may cause temporary irritation to the gastrointestinal
(digestive) tract.
Eyes
Temporary irritation (itching) or redness may occur.
Ears
Temporary irritation (itching) or redness may occur.
Primary Routes of Entry (Exposure)
Inhalation (breathing dust, fibers, or vapors), skin, and eye contact.
Target Organs
Throat, upper respiratory passages, lungs, skin, and eyes.
____________________________________________________________
Page 1 of 6 Issue Date: 01/31/2007 Revision: 1.0005
Material Name: Continuous Filament Glass Fiber Mat with Acrylic Binder Material Safety Data
Sheet ID: 2401
Medical Conditions Aggravated by Exposure
Pre-existing chronic respiratory, skin, or eye diseases or conditions.
Section 4 - First Aid Measures
First Aid: Inhalation
Remove to fresh air. Drink water to clear throat, and blow nose to remove dust.
First Aid: Skin
Wash gently with soap and water to remove dust and fibers. Wash hands before eating or using the restroom.
First Aid: Ingestion
Product is not intended to be ingested or eaten. If this product is ingested, irritation of the gastrointestinal (GI) tract may occur,
and should be treated symptomatically. Rinse mouth with water to remove fibers, and drink plenty of water to help reduce the
irritation. No chronic effects are expected following ingestion.
First Aid: Eyes
Do not rub or scratch your eyes. Dust particles may cause the eye to be scratched. Flush eyes with large amounts of water for
5-15 minutes. If irritation persists, contact a medical professional.
First Aid: Ears
Wash exposed skin with soap and water. If irritation develops in the inner ear, seek medical attention.
First Aid: Notes to Physician
Dusts from these products are mechanical irritants and are not expected to produce any chronic health effects. Treatment
should be directed toward removing the source of irritation with symptomatic treatment as necessary.
Section 5 - Fire Fighting Measures
Flash Point: Not applicable Method Used: Not applicable
Upper Flammable Limit (UFL): Not applicable Lower Flammable Limit (LFL): Not applicable
Auto Ignition: Not determined Flammability Classification: Not determined
Rate of Burning: Not determined
General Fire Hazards
There is no potential for spontaneous fire or explosion.
Extinguishing Media
Carbon dioxide (CO2), water, water fog, dry chemical.
Fire Fighting Equipment/Instructions
No special procedures are expected to be necessary for this product. Normal fire fighting procedures should be followed to
avoid inhalation of smoke and gases.
Section 6 - Accidental Release Measures
Containment Procedures
Pick up large pieces. Vacuum dusts. If sweeping is necessary, use a dust suppressant such as water. Do not dry sweep dust
accumulation. These procedures will help to minimize potential exposures.
Clean-Up Procedures
Wastes are not hazardous as defined by the Resource Conservation and Recovery Act (RCRA; 40 CFR 261). Comply with
state and local regulations for disposal of these products. If you are unsure of the regulations, contact your local Public Health
Department, or the local office of the Environmental Protection Agency (EPA).
Section 7 - Handling and Storage
Handling Procedures
Use protective equipment as described in Section 8 of this material safety data sheet when handling uncontained material.
Storage Procedures
Warehouse storage should be in accordance with package directions, if any. Material should be kept clean, dry, and protected
from moisture.
Section 8 - Exposure Controls / Personal Protection
Exposure Guidelines
A: General Product Information
Protective equipment should be provided as necessary to prevent irritation of the eyes, skin, and respiratory tract, and to keep
exposure levels below the applicable exposure limits.
____________________________________________________________
Page 2 of 6 Issue Date: 01/31/2007 Revision: 1.0005
Material Name: Continuous Filament Glass Fiber Mat with Acrylic Binder Material Safety Data
Sheet ID: 2401
B: Component Exposure Limits
Continuous filament glass fibers (65997-17-3)
ACGIH: 1 fiber/cm3 TWA (respirable fibers, length >5 碌m, aspect ratio >=3:1, as determined by the
membrane filter method at 400-450X magnification [4-mm objective], using phase-contrast
illumination); 5 mg/m3 TWA (inhalable fraction)
Carbon black (bound) (1333-86-4)
ACGIH: 3.5 mg/m3 TWA
OSHA: 3.5 mg/m3 TWA
Titanium dioxide (colorant) (13463-67-7)
ACGIH: 10 mg/m3 TWA
OSHA: 10 mg/m3 TWA (total dust)
PERSONAL PROTECTIVE EQUIPMENT
Personal Protective Equipment: Eyes/Face
Safety glasses with sideshields are recommended to keep dust out of the eyes.
Personal Protective Equipment: Ears
Use ear protection (earplugs, hood, or earmuffs) to prevent airborne dust or fibers from entering the ear, if necessary.
Personal Protective Equipment: Skin
Leather or cotton gloves should be worn to prevent skin contact and irritation.
Personal Protective Equipment: Respiratory
Use a NIOSH-approved dust/mist respirator to protect against nuisance dust. (Examples of NIOSH-approved disposable
dust/mist respirators for this type of exposure are the 3M 9900 and Moldex 2200 respirators.)
Ventilation
Local exhaust or general dilution ventilation should be provided to keep exposure levels below the applicable exposure limits.
Personal Protective Equipment: General
Loose-fitting, long-sleeved shirt and long pants and a cap should be worn to protect skin from irritation from dust.
Section 9 - Physical & Chemical Properties
Appearance: Odor:
Black, gray or white glass fiber web or mat No significant odor
Physical State: pH:
Solid Not applicable
Vapor Pressure: Vapor Density:
Not applicable Not applicable
Boiling Point: Melting Point:
Not determined >1500 F
Solubility (H2O): Specific Gravity:
Not determined 2.6
Freezing Point: Solids Content
Not applicable 100%
Evaporation Rate: VOC:
Not applicable Not applicable
Section 10 - Chemical Stability & Reactivity Information
Chemical Stability
This is a stable material. This product is not reactive.
Hazardous Decomposition
None.
Hazardous Polymerization
Will not occur.
Section 11 - Toxicological Information
Acute Toxicity
A: General Product Information
Dust from this product is a mechanical irritant, which means that it may cause irritation or scratchiness of the throat, and/or
itching in the eyes and skin.
B: Component Analysis - LD50/LC50
Carbon black (bound) (1333-86-4)
Oral LD50 Rat: >15400 mg/kg; Dermal LD50 Rabbit: >3 g/kg
____________________________________________________________
Page 3 of 6 Issue Date: 01/31/2007 Revision: 1.0005
Material Name: Continuous Filament Glass Fiber Mat with Acrylic Binder Material Safety Data
Sheet ID: 2401
Titanium dioxide (colorant) (13463-67-7)
Oral LD50 Rat: >10000 mg/kg
Carcinogenicity
A: General Product Information
The Occupational Safety and Health Administration (OSHA), National Toxicology Program (NTP), International Agency for
Research on Cancer (IARC), and American Conference of Governmental Industrial Hygienists (ACGIH) have not classified
this product as a carcinogen.
B: Component Carcinogenicity
Continuous filament glass fibers (65997-17-3)
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 3 - Not Classifiable (IARC Monograph 81 [2002] (listed under Man-made mineral fibres),
Monograph 43 [1988])
Carbon black (bound) (1333-86-4)
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 93 posted, Monograph 65
[1996])
Titanium dioxide (colorant) (13463-67-7)
ACGIH: A4 - Not Classifiable as a Human Carcinogen
IARC: Group 2B - Possibly Carcinogenic to Humans (IARC Monograph 93 posted, Monograph 47
[1989])
Chronic Toxicity
Continuous Filament Glass Fiber: No chronic health effects are known to be associated with exposure to continuous filament
fiber glass. Results from epidemiologic studies have not shown any increases in respiratory disease or cancer. The
International Agency for Research on Cancer (IARC) has classified continuous filament fiber glass as a Group 3 substance,
not classifiable as to its carcinogenicity to humans. Because of the large diameter of continuous filament fibers, these products
are not considered respirable.
Carbon black: IARC determined that data from epidemiology studies of humans exposed to carbon black provided inadequate
evidence of carcinogenicity in humans. However, data from animal studies were considered sufficient to classify carbon black
as Possibly Carcinogenic to Humans (Group 2B). Carbon black is present in the black and gray products. It is fully
encapsulated within the product and does not pose a health risk.
Section 12 - Ecological Information
Ecotoxicity
A: General Product Information
No data available for this product.
B: Component Analysis - Ecotoxicity - Aquatic Toxicity
Carbon black (bound) (1333-86-4)
24 Hr EC50 Daphnia magna: >5600 mg/L
Section 13 - Disposal Considerations
US EPA Waste Number & Descriptions
A: General Product Information
This product is not regulated as a hazardous waste by the U.S. Environmental Protection Agency (EPA) under Resource
Conservation and Recovery Act (RCRA) regulations.
B: Component Waste Numbers
No EPA Waste Numbers are applicable for this product's components.
Disposal Instructions
Dispose of waste material according to Local, State, Federal, and Provincial Environmental Regulations.
Section 14 - Transportation Information
Shipping Name: This product is not classified as hazardous for transportation.
____________________________________________________________
Page 4 of 6 Issue Date: 01/31/2007 Revision: 1.0005
Material Name: Continuous Filament Glass Fiber Mat with Acrylic Binder Material Safety Data
Sheet ID: 2401
Section 15 - Regulatory Information
US Federal Regulations
A: General Product Information
SARA 311/312: This product is not classified as hazardous under SARA 311/312.
B: Component Analysis
None of this products components are listed under SARA Section 302 (40 CFR 355 Appendix A), SARA Section 313 (40 CFR
372.65), or CERCLA (40 CFR 302.4).
State Regulations
A: General Product Information
Other state regulations may apply. Check individual state requirements.
B: Component Analysis - State
The following components appear on one or more of the following state hazardous substances lists:
Component CAS # CA FL MA MN NJ PA
Continuous filament glass fibers 65997-17-3 No No No Yes No No
Carbon black (bound) 1333-86-4 Yes No Yes Yes Yes Yes
Titanium dioxide (colorant) 13463-67-7 No No Yes Yes Yes Yes
The following statement(s) are provided under the California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65):
WARNING! This product contains a chemical known to the state of California to cause cancer.
Component CAS #
Carbon black (bound) 1333-86-4
A: TSCA Status
This product and its components are listed on the TSCA 8(b) inventory.
None of the components listed in this product are listed on the TSCA Export Notification 12(b) list.
International Regulations
A: General Product Information
These products are considered articles under both U.S. and international product regulations and as such, the products and
their ingredients do not require registration or notification on the various country-specific inventories.
B: Component Analysis - WHMIS IDL
The following components are identified under the Canadian Hazardous Products Act Ingredient Disclosure List:
Component CAS # Minimum Concentration
Carbon black (bound) 1333-86-4 1%
Section 16 - Other Information
Other Information
Prepared for:
Johns Manville Engineered Products Group
Mats & Reinforcements Division
P.O. Box 5108
Denver, CO 80217-5108
Prepared by:
Johns Manville Technical Center
P.O. Box 625005
Littleton, CO USA 80162-5005
As of the date of preparation of this document, the foregoing information is believed to be accurate and is provided in good
faith to comply with applicable federal and state law(s). However, no warranty or representation with respect to such
information is intended or given.
Date MSDS # Reason
12/03/02 2401-1.0001 New product.
____________________________________________________________
Page 5 of 6 Issue Date: 01/31/2007 Revision: 1.0005
Material Name: Continuous Filament Glass Fiber Mat with Acrylic Binder Material Safety Data
Sheet ID: 2401
12/30/04 2401-1.0002 MSDS regulatory update
12/07/05 2401-1.0003 Regulatory update. Minor edits to Section 8 Exposure, Section 11
LD50 and Section 15 WHMIS. Removed formaldehyde free from
material name.
01/19/07 2401-1.0004 Section 2 footnote for polyester fiber edited to include 8221 mat.
Article statement added to section 15.
01/30/07 2401-1.0005 8700 series mats were removed. 8229 was added to double
asterisk footnote for polyester fiber.
This is the end of MSDS # 2401
____________________________________________________________
Page 6 of 6 Issue Date: 01/31/2007 Revision: 1.0005
|