Page 1 of 3
Organoil Pty Ltd
ABN 62 052 501 792
PO Box 377
Byron Bay NSW 2481
Ph: (02) 6685 8896 Fax: (02) 6685 6747
Email: mail@organoil.com.au
MATERIAL SAFETY DATA SHEET
Hi Speed Finishing Oil
HAZARDOUS ACCORDING TO CRITERIA OF WORKSAFE AUSTRALIA
ISSUE DATE: May 2003
IDENTIFICATION:
Product & Trade Name Organoil 鈥? Hi Speed Finishing Oil
Product Code 009
INGREDIENTS:
w Dipentene CAS Number CAS No: 138-86-3
Other Name: Citrus Solvent Proportion MED
Dangerous Goods Class 3
Hazchem Code 3[Y]
Poisons Schedule Not listed
UN Number 2319
w Citrus Terpenes CAS Number CAS No: 5989-27-5
Other Name: Citrus Solvent Proportion MED
Dangerous Goods Class 3
Hazchem Code 3[Y]
Poisons Schedule Not listed
UN Number 2319
w Tung Oil Ingredients not designated as hazardous according to worksafe
Other names: China Wood Oil Australia up to 100%
w Mustard Seed Oil
PROPORTION VHIGH >60, HIGH 30-60, MED 10-29, LOW 1-9, VLOW <1
(% weight per weight):
USES Woodworking (on lathe and powered disc finishing)
PHYSICAL DESCRIPTION / PROPERTIES:
Appearance Pale, clear amber liquid
Boiling Point Not known
Vapour Pressure Not known
Specific Gravity 0.92 鈥? 0.93 (relative density at 25 degrees C)
Flash Point 70 degrees celcius open cup
Solubility Insoluble in water, soluble in hydrocarbons
HEALTH HAZARD INFORMATION:
HEALTH No adverse health effects expected if the product is handled in accordance with this
EFFECTS: Safety Data Sheet and the product label. Symptoms that may arise if the product is
mishandled are:
ACUTE: Swallowed Ingestion may cause gastrointestinal and or bladder irritation,
nausea and vomiting.
Eye Mild Irritant
Skin Mild Irritant
Inhalation Vapour may be irritating to mucous membranes and respiratory
tract.
CHRONIC: No data available
FIRST AID: Swallowed Immediately rinse mouth with water and give water to drink. Do
not induce vomiting. Seek medical assistance and provide this
MSDS.
Eye Flush eye with copious amounts of clean water for 15 minutes
Skin If skin contact occurs, remove contaminated clothing and wash
skin thoroughly with soap and water. If irritation occurs seek
medical assistance.
Inhalation Move to a well ventilated area. Remove contaminated clothing. If
breathing laboured ensure airways are clear and seek medical
assistance.
FIRST AID FACILITIES: Ensure an eye bath and shower are available and ready for use
ORGANOIL MSDS 鈥? Hi Speed Finishing Oil
Page 2 of 3
ADVICE TO DOCTOR: Treat symptomatically based on judgement of doctor and
individual reactions of patient.
PRECAUTIONS FOR USE:
Exposure Standards Use in a naturally well ventilated area. No exposure standards
given.
Engineering Controls Use in a naturally well ventilated area or provide general exhaust
ventilation to keep exposure levels to a minimum. Keep
containers closed when not in use.
Personal protection Avoid skin and eye contact and inhalation of vapours. Wear
overalls, eye protection (chemical goggles) and chemical resistant
solvex nitrile glove to standard AN/NZS 2161.2:1998. If ventilation
is not adequate, wear a self-contained respirator to the
requirements of AS1715 or AS1716. Always wash hands before
smoking, eating, drinking or using the toilet.
Flammability Keep away from heat sources.
Keep away from ignition sources (NO SMOKING)
SAFE HANDLING INFORMATION:
Storage and transport Store away from sources of heat or ignition. Store in a cool place
away from direct sunlight. Keep containers securely sealed and
protected against physical damage. Earth and bond containers
and vehicles to filling points when dispensing pouring or pumping
as vapours may ignite due to static electricity. Do not pressurise,
cut, weld, braze, solder, drill, grind or expose empty containers to
heat, spark or open flames.
Spills and disposals Eliminate all ignition sources (NO SMOKING) Eliminate
flammables.
Contain with sand or dirt. For large spills, pump into steel drums.
For small spills, absorb material with sand or diatomaceous earth.
Shovel into steel drums. Wash spills with copious amounts of
detergent and water. AFTER TREATMENT DISPOSAL: Contact
local waste authority re. disposing at waste depot.
Fire / Explosion Hazard Liquid can float on water and may possibly travel to distant
locations. Never use welding or cutting torch on or near drum.
Fire Fighters to wear self-contained breathing apparatus and
complete protective clothing.
Extinguishing media: Move upwind of fire. Summon the fire
brigade immediately, dial 000. Remove from the vicinity
containers not involved in fire. Use foam or dry chemical powder
to extinguish fire.
OTHER INFORMATION:
C:\mydocs\data-info sheets\material safety data \NI\hispeedfinishingoil (word) 01 05 30
ORGANOIL MSDS 鈥? Hi Speed Finishing Oil
Page 3 of 3
Stability Stable. Spontaneous heating may occur in such items as rags,
insulation, and rubbish soaked with this material and exposed to
air. Manufacturer recommends soaking of used cloths/rags in
water immediately after use.
Ecological information Avoid contaminating waterways. Refer to state land waste
management authority for disposal.
R50 Limonene content very toxic to aquatic organisms
R53 Limonene content may cause long term adverse effects in
the aquatic environment.
Toxicological information Toxicological information: Lead free. Dry oil is non-toxic. For
Limonene content Toxicological Information is:
Acute (oral) LD50 -
脴 5 g/kg bw (rabbit)
脴 4.4/5.1 g/kg bw (rat m/f)
脴 5.6/6.6 g/kg bw (mouse m/f)
Hazard Classi fication for Xi Irritant
Limonene/Dipentene N Dangerous for the environment
Risk phrases for Limonene R38 Irritating to skin
content R43 May cause sensitisation by skin contact
Safety phrases for Limonene S2 Keep out of reach of children
content S24 Avoid contact with skin
S37 Wear suitable gloves
CONTACT POINTS
Organoil Pty Ltd, Byron Bay Phone: 02 6685 8896 - ask for Technical Officer
Poisons Information Centre Westmead NSW Phone: 131126
THIS INFORMATION HAS BEEN PREPARED AS A GUIDE FROM TE CHNICAL AND MEDICAL DATA
AVAILABLE, AND TO OUR KNOWLEDGE IS TRUE AND ACCURATE. IT IS NOT CLAIMED TO BE ALL
INCLUSIVE AND MAY DEMAND OTHER ADDITIONAL CONSIDERATIONS. IT IS NOT A SUBSTITUTE
FOR EXPERT ADVICE.
C:\mydocs\data-info sheets\material safety data \NI\hispeedfinishingoil (word) 01 05 30
|