CPD庐 ACRYLIC CURE & SEAL (SILANE)
DESCRIPTION NEW CONCRETE
CPD庐 Acrylic Cure & Seal (Silane) is a solvent based Apply a minimum of 3 hours after the concrete has received
final finishing and all surface water has dissipated. Apply
acrylic curing and sealing compound for new and existing
uniformly in a single saturating application leaving no
exterior concrete that also contains silane. It is designed to
puddles, pinholes or gaps.
cure new concrete in accordance with ASTM C-309
requirements and to help protect concrete from
deterioration due to the intrusion of water, salts and STAMPED CONCRETE
Powerwash, scrub and flush away all release and powder
deicing chemicals in a single 鈥淥NE STEP鈥? application.
from surface. Allow to surface dry prior to application for
Conventional silane application involves costly removal of
best results. Apply in a single uniform application at the
curing compounds prior to applying or time consuming
recommended coverage rate. The next day application of a
wet curing of concrete.
second coat is highly recommended for maximum protection
and uniform finish.
WHERE TO USE
CPD庐 Acrylic Cure and Seal (Silane) can be used on all
Drying time at 21掳 C (70掳F) and 50% R.H. is:
exterior concrete whether new or old. Areas of application
鈥? Dry to touch 鈥? 1 Hour
are, but not limited to stamped, colored concrete, concrete
鈥? Foot Traffic 鈥? 8 Hours
sidewalks, elevated decks, and parking garage floors.
鈥? Vehicle Traffic 鈥? 18-24 Hours
BENEFITS
Prior to application verify rain free weather for a 24 hour
鈥? effectively cures new concrete
period after application of each coat.
鈥? helps to protect concrete by forming an effective
chloride ion screen
LIMITATIONS
鈥? helps to prevent concrete scaling and spalling
鈥? not for interior concrete floors with a hard steel trowel
鈥? UV stabilizers in product prevent yellowing
finish
鈥? improves uniformity and depth of color in colored
鈥? do not use on concrete to receive carpet, tile, paint or
concrete flatwork.
other bonded overlays
鈥? effective on both horizontal and vertical surfaces
鈥? do not apply below 10掳C (50掳F)
鈥? not for use as a solvent/chemical resistant sealer
APPLICATION
鈥? do not use on carbonated concrete
SURFACE PREPARATION
Thoroughly mix prior to using. The product is packaged
COVERAGE
ready to use - do not dilute with solvent or water.
STAMPED CONCRETE
Application can be done using a long nap roller but spray
First Coat - 5m2/L/(200ft2/U.S. Gal)
application is recommended for stamped concrete. Prior to
Second Coat - 7.4m2/L(300ft2/U.S. Gal)
using sprayer assure it is clean and dry. Use a low
pressure sprayer with seals and hoses resistant to xylene
NEW CONCRETE -5m2/L (200ft2/U.S. Gal)
solvent.
OLD CONCRETE - 5m2/L/200ft2/U.S. Gal)
OLD CONCRETE
Clean thoroughly with concrete compatible detergent (such
STANDARDS
as Sure Klean) and high pressure water removing all oil,
Manufactured to comply with ASTM C-309 Type 1 and
grease, dust and any other foreign material. Allow to dry
ASTM 1315 Type 1 and to meet the requirements of
then apply product at the recommended coverage rates
NCHRP 244, Series II & IV. VOC compliant at 670 gms/L
listed.
for concrete curing and sealing compound.
0339-08-1105
THIS WARRANTY MAY NOT BE MODIFIED OR
PACKAGING
EXTENDED BY REPRESENTATIVES OF CPD庐, ITS
208L drum (55 U.S. gal) - 205 kg (452 lbs.)
18.9L pail (5 U.S. gal) - 19 kg (42 lbs.) DISTRIBUTORS OR DEALERS.
3.79L can (1 U.S. gal) - 4 kg (8.8lbs)
CLEAN UP
Clean all equipment and tools with CPD庐 Xylol prior to
material set. CAUTION: CPD庐 Xylol is a flammable
solvent. Review MSDS prior to use.
STORAGE
Store containers indoors at normal warehouse
temperatures away from heaters and sources of ignition. If
only part of container is used at any one time secure lid
directly after using. DO NOT expose product to moisture
or atmosphere - keep sealed.
SHELF LIFE
One year from the date of manufacture when stored in
original unopened container under normal warehouse
conditions.
SAFETY PRECAUTION
Flammable Liquid. Consult Material Safety Data Sheet
(M.S.D.S.) for instructions on safe handling.
MSDS # 240b
WARRANTY
The recommendations made and the information herein is
based on our own and independent laboratory experience,
and is believed to be accurate under controlled conditions.
However, no warranty or guarantee of accuracy is made
because we cannot cover every possible application of
product nor anticipate every variation encountered in
weather conditions, job-conditions, methods used and
types of surfaces on which the product is applied. The
users shall make their own tests to determine the suitability
of such products for any particular purpose.
CPD庐 makes no warranties with respect to this product,
expressed or implied, without limitation, the implied
warranties of merchantability or fitness for a particular
purpose.
CPD庐鈥? liability shall be limited in all events to supplying
s
sufficient product to re-treat and/or repair the specific area
to which CPD庐 product has been applied. CPD庐 reserves
the right to have the true cause of any difficulty determined
by accepted test methods. CPD庐 shall have no other
liability, including liability for incidental, consequential or
resultant damages, however caused, whether due to breach
of warranty, negligence, or strict liability.
|