CPD庐 STOVE & FURNACE
REFRACTORY CEMENT
DESCRIPTION CLEAN UP
CPD庐 Stove & Furnace Refractory Cement is a wet, air- Clean all tools with water prior to product drying.
setting cement for jointing and repairing fire brick.
STORAGE
Store in a cool, dry place and avoid freezing. Cover with
WHERE TO USE
鈥? thin set mortar for fire brick a damp cloth or a little water if package has been opened.
鈥? patching and repairing broken joints in fireplaces,
stoves, furnaces, etc. SHELF LIFE
One year from the date of manufacture when stores in
original containers at normal warehouse temperatures.
BENEFITS
鈥? resistant to high temperatures
鈥? very low shrinkage SAFETY PRECAUTION
鈥? excellent bond strength to fire brick Consult Material Safety Data Sheet (M.S.D.S.) for
鈥? ready-to-use specific instructions. MSDS # 58.
鈥? smooth consistency, excellent work ability
WARRANTY
The recommendations made and the information herein is
PROPERTIES
Maximum service temperature.........1600掳C (2900掳F) based on our own and independent laboratory experience,
Bond strength at 100掳C....................48MPa (6961psi) and is believed to be accurate under controlled conditions.
Composition....................................Silica fireclay However, no warranty or guarantee of accuracy is made
Setting characteristics......................Air dry because we cannot cover every possible application of
Color...............................................Off white product nor anticipate every variation encountered in
weather conditions, job-conditions, methods used and
types of surfaces on which the product is applied. The
APPLICATION
We recommend that thin joints be used in setting fire brick. users shall make their own tests to determine the suitability
Dip the brick on all sides which touch other brick work of such products for any particular purpose.
and tap firmly into place so as to make as tight a joint as
CPD庐 makes no warranties with respect to this product,
possible.
expressed or implied, without limitation, the implied
This product can also be used by buttering with a trowel warranties of merchantability or fitness for a particular
if very thin joints are made. purpose.
CPD庐鈥? liability shall be limited in all events to supplying
s
NOTE: Mix until uniform prior to using.
sufficient product to re-treat and/or repair the specific area
to which CPD庐 product has been applied. CPD庐 reserves
LIMITATIONS
the right to have the true cause of any difficulty determined
鈥? not suitable for application in thick layers - Thin layers
by accepted test methods. CPD庐 shall have no other
only. (Maximum 1/8")
liability, including liability for incidental, consequential or
鈥? do not dilute with water
resultant damages, however caused, whether due to breach
of warranty, negligence, or strict liability.
STANDARDS
Manufactured to comply with CAN/CGSB-10.3-92
THIS WARRANTY MAY NOT BE MODIFIED OR
EXTENDED BY REPRESENTATIVES OF CPD庐, ITS
PACKAGING
DISTRIBUTORS OR DEALERS.
3 kg (6.6 lb), 8.5 kg (18.7 lb), 25 kg (55 lb).
0406-01-1105
|