CPD庐 10 MINUTE SET
DESCRIPTION LIMITATIONS
CPD庐 10 Minute Set is a fast setting, non-metallic 鈥? do not put stress on repaired area for at least one hour
embedment grout. This product contains optimumly 鈥? do not use in the presence of sulphates, sugar dust or
graded sand aggregate and is recommended for grout de-icing chemicals
thicknesses exceeding 13mm (陆鈥?). 鈥? not suitable for exterior use or in areas constantly
exposed to water
WHERE TO USE
Used to grout: COVERAGE/YIELD
鈥? embedded hand rails 0.014m鲁 (0.50 ft鲁) per 25 kg (55 lb) bag.
鈥? bolts
鈥? light standards PACKAGING
鈥? fixtures and brackets 25 kg (55 lb) multi wall paper bag.
鈥? in plant posts
CLEAN UP
Clean all tools and equipment with potable water before
BENEFITS
鈥? initial set in 10 minutes and is hard in one hour products sets.
鈥? traffic or other service conditions can resume within
hours of application STORAGE
鈥? non-metallic May be stored short term anywhere under a tarp on a pallet
鈥? pourable consistency as long as the product is kept dry.
PROPERTIES SHELF LIFE
Compressive Strengths (Trowelable Consistency) Two years in original unopened bag stored under normal
ASTM C109-98 heated warehouse conditions.
1 hour 24 hours 3 days 28 days
6.9MPa 16.6MPa 20.7MPa 31MPa SAFETY PRECAUTION
1000psi 2400psi 3000psi 4500psi Consult Material Safety Data Sheet (M.S.D.S.) for specific
instructions. MSDS # 16.
Set Time: Pourable Consistency Mix
Final - 30 minutes @ 24掳C (75掳) WARRANTY
The recommendations made and the information herein is
The above information is representative of actual based on our own and independent laboratory experience,
production runs. Independent test results may vary from and is believed to be accurate under controlled conditions.
the above by approximately 卤 10%. However, no warranty or guarantee of accuracy is made
because we cannot cover every possible application of
product nor anticipate every variation encountered in
APPLICATION
weather conditions, job-conditions, methods used and types
MIXING INSTRUCTIONS
Do not attempt to mix more material than what can be of surfaces on which the product is applied. The users shall
placed in 10 minutes. Place CPD庐 10 Minute Set in a make their own tests to determine the suitability of such
clean mixing container and add water at the rate of 210ml products for any particular purpose.
(0.21L) per kg of CPD庐 10 Minute Set to achieve a
CPD庐 makes no warranties with respect to this product,
pourable mix. For plastic or trowelable consistency, use
175ml (0.17L) of water per kg of material. expressed or implied, without limitation, the implied
warranties of merchantability or fitness for a particular
Under certain conditions, it may be desirable to purpose.
incorporate the use of CPD庐 Concentrated Latex
Adhesive. Consult your CPD庐 Technical Representative CPD庐 鈥? liability shall be limited in all events to supplying
s
for additional information. sufficient product to re-treat and/or repair the specific area
0392-02-1105
to which CPD庐 product has been applied. CPD庐 reserves
the right to have the true cause of any difficulty determined
by accepted test methods. CPD庐 shall have no other
liability, including liability for incidental, consequential or
resultant damages, however caused, whether due to breach
of warranty, negligence, or strict liability.
THIS WARRANTY MAY NOT BE MODIFIED OR
EXTENDED BY REPRESENTATIVES OF CPD庐, ITS
DISTRIBUTORS OR DEALERS.
|