CPD庐 ACRYLIC CURE & SEAL
(SOLVENT BASE) 21%
DESCRIPTION COVERAGE
CPD庐 Acrylic Cure & Seal 21% is a colorless modified New concrete approximately 5 m虏/L (200 ft虏/U.S. gal).
Old concrete approximately 6-10 m虏/L (245-400 ft虏/ U.S.
acrylate with a solvent base for curing, sealing, and
gal).
dustproofing new and old concrete.
STANDARDS
WHERE TO USE
CPD庐 Acrylic Cure and Seal 21% can be used on concrete Manufactured to comply with ASTM C-309, Type 1,
AASHO M-148, Type 1 and CGSB 90-GP-1A Type 1.
floors, sidewalks, pavements, driveways and runways.
PACKAGING
BENEFITS
208L drum (55 U.S. gal) - 207 kg (456 lbs.)/drum
鈥? high moisture retention for optimum cure
18.9L pail (5 U.S. gal) - 18 kg (42 lbs.)/pail
鈥? recommended for both new and existing concrete
3.79L pail (1 U.S. gal) - (4/case ) 14 kg (35lbs)/case
鈥? interior and exterior applications
鈥? help control dusting
CLEAN UP
鈥? contains UV stabilizers that prevent yellowing of the
Clean all equipment and tools with CPD庐 Xylol prior to
sealer from exposure to sunlight
material set. CAUTION: CPD庐 Xylol is a flammable
鈥? compatible with many carpet, tile and flooring
solvent. Review M.S.D.S. prior to using.
adhesives. However a test should be conducted to verify
compatibility
STORAGE
Store material indoors away from heaters and open flame.
APPLICATION
SURFACE PREPARATION
SHELF LIFE
Surface must be clean and free of oil, grease, dirt, curing
Two years from date of manufacture when stored in original
compounds and other foreign matter. If doubt exists as to
unopened container, and under normal warehouse
condition of the surface, chemical or mechanical cleaning
conditions.
may be required.
New concrete must be free of surface water prior to
application. Apply CPD庐 Acrylic Cure and Seal 21% by SAFETY PRECAUTION
Flammable Liquid. Consult Material Safety Data Sheet
roller or low pressure hand or power spray. Surfaces are
(M.S.D.S.) for specific instructions. MSDS # 255.
normally dry to touch in 30 minutes and cured in 2 hours.
If a second coat is required, allow the first coat to dry for
WARRANTY
approximately 12 to 15 hours before re-application.
The recommendations made and the information herein is
Should not be applied during high temperature conditions
based on our own and independent laboratory experience,
in direct sunlight. These conditions cause rapid
and is believed to be accurate under controlled conditions.
evaporation which does not allow the film to form
However, no warranty or guarantee of accuracy is made
properly. Under these conditions the film may peel, bubble
because we cannot cover every possible application of
and or turn white (blush).
product nor anticipate every variation encountered in
weather conditions, job-conditions, methods used and types
LIMITATIONS
CPD庐 Acrylic Cure & Seal 21% is not recommended for: of surfaces on which the product is applied. The users shall
make their own tests to determine the suitability of such
鈥? application as a chemically resistant coating
products for any particular purpose.
鈥? hardening of carbonated concrete surfaces
鈥? areas where solvent exposure is a service condition
CPD庐 makes no warranties with respect to this product,
expressed or implied, including, without limitation, the
0339-05-1105
implied warranties of merchantability or fitness for a
particular purpose.
CPD庐鈥? liability shall be limited in all events to supplying
s
sufficient product to re-treat and/or repair the specific area
to which CPD庐 product has been applied. CPD庐 reserves
the right to have the true cause of any difficulty determined
by accepted test methods. CPD庐 shall have no other
liability, including liability for incidental, consequential or
resultant damages, however caused, whether due to breach
of warranty, negligence, or strict liability.
THIS WARRANTY MAY NOT BE MODIFIED OR
EXTENDED BY REPRESENTATIVES OF CPD庐, ITS
DISTRIBUTORS OR DEALERS.
|