CPD庐 CONCENTRATED LATEX ADHESIVE
DESCRIPTION Concrete Topping (by weight)
CPD庐 Concentrated Latex Adhesive is a high quality non 5 parts Portland Cement
re-emulsifiable SBR latex adhesive for use as a bonding 10 parts sand
agent for concrete repair mortars or as a modifier for a 10 parts gravel
1 part CPD庐 Concentrated Latex Adhesive
topping to hardened concrete, masonry or similar surfaces.
1-2 parts Water (approximately)
WHERE TO USE
Applications in conjunction with mortar, grout or concrete Note: Cement fines varies widely. Fines determines water
include repairing or resurfacing concrete floors, an integral demand. Always do a small trial mix prior to proceeding
bonding agent between new and old concrete, integral with job.
waterproofer above and below grade, gunite applications,
bonding concrete to asphalt, feather edging, floors, CURING
sidewalks, swimming pools, bridges, walls, and reservoirs. Do not moist cure latex adhesive mixtures. Cure with
CPD庐 Acrylic Cure and Seal (Water Base). Cure may be
applied by brush, roller, or spray immediately after final
BENEFITS
set or after finishing operations have been completed.
鈥? superior flexural, adhesive, impact strengths and
excellent abrasion properties
LIMITATIONS
鈥? provides good adhesion in repair applications.
CPD庐 Concentrated Latex Adhesive is not recommended
鈥? increase the durability of the concrete topping under
for:
heavy traffic conditions
? use at temperatures below 4.5? (40? or above
C F)
鈥? protects against the effects of freeze/thaw conditions
30? (86? during application
C F)
鈥? decreases the permeability of the concrete to de-icing
? use in conjunction with air entraining admixtures
salts
? use in areas where in-service temperatures exceeds
鈥? when mixed with mortar or grout, this product forms an
100? (212掳F)
C
adhesive bond that is impervious to oil, gasoline, dilute
acids and alkali solutions
COVERAGE
Dependent on specific mix design. For slurry bond coat
APPLICATION
coverage per litre will be .50m虏/L at 80mils (20ft虏/US
SURFACE PREPARATION
Gal.) approximately.
Surface must be clean and sound. Remove all grease , oil,
and foreign matter. Unsound concrete should be removed
PACKAGING
by mechanical means such as scarifying. The surface
208L drums (55 U.S. gal) - 234 kg/drum (520 lbs)
should be thoroughly dampened prior to application of
18.9L pails (5 U.S. gal) - 22 kg/pail (48.5 lbs)
adhesive mixture.
3.79L poly bottle (1 U.S. gal)-(4/carton) 18 kg/(39.6 lbs)
MIXING (by volume)
Latex Slurry Bond Coat - Sample Mix:
CLEAN UP
10kg Type 10 Cement
4.5L CPD庐 Concentrated Latex Adhesive Clean all tools with water shortly after use and before
latex dries.
Dilute 1/1 by volume with potable water
Mix Yield: Approx 7 Litres (1.8 US gal)
STORAGE
Keep from freezing prior to use. Discard if allowed to
Mortar Topping (by weight)
pass through 5 freeze-thaw cycles. If frozen, stir throughly
5 parts Portland Cement
prior to use. Store in a heated warehouse above 4.5掳C
15 parts concrete sand
1 part CPD庐 Concentrated Latex Adhesive (40掳F).
1-2 parts Water (approximately)
SHELF LIFE
Two years from date of manufacture if kept in original,
unopened containers under normal warehouse conditions.
0390-01-1105
SAFETY PRECAUTIONS
Consult Material Safety Data Sheet (M.S.D.S.)for specific
instructions. MSDS # 56.
WARRANTY
The recommendations made and the information herein is
based on our own and independent laboratory experience,
and is believed to be accurate under controlled conditions.
However, no warranty or guarantee of accuracy is made
because we cannot cover every possible application of
product nor anticipate every variation encountered in
weather conditions, job-conditions, methods used and
types of surfaces on which the product is applied. The
users shall make their own tests to determine the suitability
of such products for any particular purpose.
CPD庐 makes no warranties with respect to this product,
expressed or implied, without limitation, the implied
warranties of merchantability or fitness for a particular
purpose.
CPD庐鈥? liability shall be limited in all events to supplying
s
sufficient product to re-treat and/or repair the specific area
to which CPD庐product has been applied. CPD庐 reserves
the right to have the true cause of any difficulty determined
by accepted test methods. CPD庐 shall have no other
liability, including liability for incidental, consequential or
resultant damages, however caused, whether due to breach
of warranty, negligence, or strict liability.
THIS WARRANTY MAY NOT BE MODIFIED OR
EXTENDED BY REPRESENTATIVES OF CPD庐, ITS
DISTRIBUTORS OR DEALERS.
|