MATERIAL SAFETY DATA SHEET
SKIN CONTACT:
SECTION 1 - PRODUCT AND COMPANY INFORMATION
May cause moderate skin irritation. Dryness, itching, cracking, burning,
redness, and swelling are conditions associated with excessive skin
Refinish Products contact.
19699 Progress Drive SKIN ABSORPTION:
Strongsville, OH 44149 May be absorbed through the skin. Prolonged or repeated contact may
cause an allergic skin reaction.
EMERGENCY PHONE NUMBERS (412) 434-4515 (U.S.) INHALATION:
(24 hours/day): Vapor and/or spray mist harmful if inhaled. Vapor irritates eyes, nose, and
(514) 645-1320 (Canada) throat. Vapor generated at elevated temperatures irritates eyes, nose and
01-800-00-21-400 (Mexico) throat.
0532-83889090 (China) INGESTION:
Harmful if swallowed.
TECHNICAL (740) 363-9610 (DELAWARE, OH) 8:00 a.m. -
SIGNS & SYMPTOMS OF OVEREXPOSURE:
INFORMATION: 5:00 p.m. EST
Repeated exposure to high vapor concentrations may cause irritation of
PRODUCT SAFETY/MSDS INFORMATION: (412) 492-5555 7:00 a.m.
the respiratory system and permanent brain and nervous system
- 4:30 p.m. EST
damage. Eye watering, headaches, nausea, dizziness and loss of
Product ID: DP401 (0808)
coordination are indications that solvent levels are too high. Intentional
PRODUCT NAME: EPOXY PRIMER CATALYST
misuse by deliberately concentrating and inhaling the contents can be
SYNONYMS: None
harmful or fatal. Dryness, itching, cracking, burning, redness, and
ISSUE DATE: 05/26/2006
swelling are conditions associated with excessive skin contact.
EDITION NO.: 4
CHEMICAL Polyamide
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: Not
FAMILY:
applicable.
EMERGENCY OVERVIEW:
CHRONIC OVEREXPOSURE EFFECTS
Flammable. Keep away from heat, sparks, flames, and other sources of
Avoid long-term and repeated contact.
ignition. Do not smoke. Extinguish all flames and pilot lights. Turn off
Repeated exposure to vapors above recommended exposure limits (see
stoves, heaters, electrical motors, and other sources of ignition during
Section 8) may cause irritation of the respiratory system and permanent
use and until all vapors/odors are gone.CAUSES SEVERE EYE
brain and nervous system damage. Intentional misuse by deliberately
IRRITATION. MAY CAUSE MODERATE SKIN IRRITATION. MAY BE
concentrating and inhaling the contents can be harmful or fatal.
ABSORBED THROUGH THE SKIN. PROLONGED OR REPEATED
Prolonged exposure to an ingredient(s) in this product may cause kidney
CONTACT MAY CAUSE AN ALLERGIC SKIN REACTION.VAPOR
and/or liver damage. This product contains toluene. Toluene inhalation in
AND/OR SPRAY MIST HARMFUL IF INHALED. VAPOR IRRITATES
animals (greater than 1500 ppm) and intentional inhalation of toluene-
EYES, NOSE, AND THROAT. VAPOR GENERATED AT ELEVATED
containing products by humans (e.g. glue) has caused adverse fetal
TEMPERATURES IRRITATES EYES, NOSE AND THROAT.HARMFUL
development effects. High exposures to xylenes in some animal studies
IF SWALLOWED.
have been reported to cause health effects on the developing embryo
and fetus. These effects were often at levels toxic to the mother. There is
some evidence that repeated exposure to organic solvent vapors in
SECTION 2 - COMPOSITION INFORMATION
combination with constant loud noise can cause greater hearing loss than
The following ingredient(s) marked with an "x" are considered expected from exposure to noise alone.
hazardous under applicable U.S. OSHA and/or Canadian WHMIS The effects of long-term, low level exposures to this product have not
regulations. If no ingredients are listed, then there are no U.S. OSHA been determined. Safe handling of this material on a long-term basis
and/or Canadian WHMIS hazardous ingredients in this product. should emphasize the prevention of all contact with this material to avoid
Material/ Percent Hazardous
any effects from repetitive acute exposures. See Section 11, of this
CAS Number
MSDS for a detailed list of chronic health effects information available on
ISOPROPYL ALCOHOL 15 - 40 X
individual ingredients in this product.
67-63-0
N.J. TRADE SECRET 10 - 30 X
#80100337-5132
SECTION 4 - FIRST AID MEASURES
If ingestion, irritation, any type of overexposure or symptoms of
PROPYLENE GLYCOL 7 - 13 X
overexposure occur during or persists after use of this product, contact a
MONOMETHYL ETHER
POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN
107-98-2
TOLUENE 7 - 13 X immediately; have Material Safety Data Sheet information available.
108-88-3 EYE CONTACT:
XYLENES 5 - 10 X Remove contact lens and pour a gentle stream of warm water through the
1330-20-7
affected eye for at least 15 minutes. Contact a poison control center,
2-BUTOXYETHYL ACETATE 5 - 10 X
emergency room or physician right away as further treatment will be
112-07-2
necessary.
OXO-HEPTYL ACETATE 1-5 X
SKIN CONTACT:
90438-79-2
(As Glycol ethers) * X See Sections 8 Run a gentle stream of water over the affected area for 15 minutes. A
112-07-2 and 15 for mild soap may be used if available. If any symptoms persist, contact a
information. poison control center, emergency room, or physician as further treatment
may be necessary.
SECTION 3 - HAZARDS IDENTIFICATION INHALATION:
ACUTE OVEREXPOSURE EFFECTS Remove from area to fresh air. If symptomatic, contact a poison control
center, emergency room or physician for treatment information.
EYE CONTACT:
Causes severe eye irritation. Redness, itching, burning sensation and
visual disturbances may indicate excessive eye contact.
__________________________________________________________________
Page 1 of 4
_______________________________________________________________________________________________________________
Refinish Products
19699 Progress Drive
Strongsville, OH 44149
Product ID: DP401 (0808)
PRODUCT NAME: EPOXY PRIMER CATALYST
INGESTION: EYES:
Gently wipe or rinse the inside of the mouth with water. Sips of water Wear chemical-type splash goggles when possibility exists for eye
may be given. Never give anything by mouth to an unconscious person. contact due to splashing or spraying liquid, airborne particles, or vapors.
Contact a poison control center, emergency room or physician right away SKIN/GLOVES:
as further treatment may be necessary. Wear protective clothing to prevent skin contact. Apron and gloves
should be constructed of: butyl rubber. No specific
permeation/degradation testing have been done on protective clothing for
SECTION 5 - FIRE FIGHTING MEASURES
this product. Recommendations for skin protection are based on
FLAMMABLE PROPERTIES
infrequent contact with this product. For frequent contact or total
FLASHPOINT: 40 Degrees F ( 4 Degrees C)
immersion, contact a manufacturer of protective clothing for appropriate
FLASHPOINT TEST METHOD:
chemical impervious equipment. Clean contaminated clothing and shoes.
Pensky-Martens Closed Cup
RESPIRATOR:
UEL: Not Available.
Overexposure to vapors may be prevented by ensuring proper ventilation
LEL: 1.8
controls, vapor exhaust or fresh air entry. A NIOSH- approved air
AUTOIGNITION TEMPERATURE:
purifying respirator with the appropriate chemical cartridges or a positive-
Not Available.
pressure, air-supplied respirator may also reduce exposure. Read the
EXTINGUISHING MEDIA:
respirator manufacturer's instructions and literature carefully to determine
Use National Fire Protection Association (NFPA) Class B extinguishers
the type of airborne contaminants against which the respirator is effective,
(carbon dioxide, dry chemical, or universal aqueous film forming foam)
its limitations, and how it is to be properly fitted and used. Provide general
designed to extinguish NFPA Class IB flammable liquid fires. Water spray
dilution or local exhaust ventilation in volume and pattern to keep the
may be ineffective. Water spray may be used to cool closed containers
concentration of ingredients listed in Section 2 below the lowest
to prevent pressure build-up and possible autoignition or explosion when
suggested exposure limits, the LEL below the stated limit, and to remove
exposed to extreme heat.
decomposition products during welding or flame cutting.
PROTECTION OF FIREFIGHTERS:
GENERAL HYGIENE - ESTABLISHED EXPOSURE LIMITS
Fire-fighters should wear self-contained breathing apparatus and full
If Threshold Limit Values (TLVs) have been established by ACGIH,
protective clothing.
OSHA, Ontario or PPG, they will be listed below. These limits are
UNUSUAL FIRE AND EXPLOSION HAZARDS:
intended for use in the practice of industrial hygiene as guidelines or
Keep this product away from heat, sparks, flame, and other sources of
recommendations in the control of potential workplace health hazards.
ignition (i.e., pilot lights, electric motors, static electricity). Invisible vapors
These limits are not a relative index of toxicity and should not be used by
can travel to a source of ignition and flash back. Do not smoke while
anyone without industrial hygiene training.
using this product. Keep containers tightly closed when not in use. Closed
containers may explode when overheated. Do not apply to hot surfaces.
Toxic gases may form when this product comes in contact with extreme Material/ Percent ACGIH TLV ACGIH OSHA PEL OSHA
heat. May produce hazardous decomposition products when exposed to CAS Number STEL STEL
ISOPROPYL 15 - 40 200 PPM 400 PPM 400 ppm 500 ppm
extreme heat. Extreme heat includes, but is not limited to, flame cutting,
ALCOHOL
brazing, and welding.
67-63-0
PROPYLENE 7 - 13 100 PPM 150 PPM 100 ppm 150 ppm
SECTION 6 - ACCIDENTAL RELEASE MEASURE GLYCOL
STEPS TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED: MONOMETHYL
ETHER
Provide maximum ventilation. Only personnel equipped with proper
107-98-2
respiratory, skin, and eye protection should be permitted in the area.
TOLUENE 7 - 13 S- 50 ppm Not 100 ppm 150 ppm
Remove all sources of ignition. Take up spilled material with sand,
108-88-3 established
vermiculite, or other noncombustible absorbent material and place in
XYLENES 5 - 10 100 ppm 150 PPM 100 ppm 150 ppm
clean, empty containers for disposal. Only the spilled material and the 1330-20-7
absorbant should be placed in this container. 2-BUTOXYETHYL 5 - 10 20 PPM Not Not Not
ACETATE established established established
112-07-2
SECTION 7 - HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN DURING HANDLING AND STORAGE:
Vapors may collect in low areas. If this material is part of a multiple Material/ Percent Ontario Ontario PPG IPEL PPG STEL
component system, read the Material Safety Data Sheet(s) for the other CAS Number TWA STEL
component or components before blending as the resulting mixture may ISOPROPYL 15 - 40 200 PPM 400 PPM Not Not
ALCOHOL established established
have the hazards of all of its parts. Containers should be grounded when
67-63-0
pouring. Avoid free fall of liquids in excess of a few inches.
PROPYLENE 7 - 13 100 ppm 150 ppm Not Not
STORAGE:
GLYCOL established established
Do not store above 120 degrees F.(48 degrees C.). Store large quantities
MONOMETHYL
in buildings designed and protected for storage of NFPA Class IB ETHER
flammable liquids. 107-98-2
TOLUENE 7 - 13 50 PPM Not Not Not
108-88-3 established established established
SECTION 8 - EXPOSURE CONTROLS & PERSONAL PROTECTION
XYLENES 5 - 10 100 ppm 150 ppm Not Not
ENGINEERING CONTROLS:
1330-20-7 established established
Provide general dilution or local exhaust ventilation in volume and pattern 2-BUTOXYETHYL 5 - 10 S- 20 PPM 75 PPM Not Not
to keep the concentration of ingredients listed in Section 8 below the ACETATE established established
lowest suggested exposure limits, the LEL below the stated limit, and to 112-07-2
remove decomposition products during welding or flame cutting. OXO-HEPTYL 1-5 50 PPM Not Not Not
ACETATE established established established
90438-79-2
PERSONAL PROTECTIVE EQUIPMENT
__________________________________________________________________
Page 2 of 4
_______________________________________________________________________________________________________________
Refinish Products
19699 Progress Drive
Strongsville, OH 44149
Product ID: DP401 (0808)
PRODUCT NAME: EPOXY PRIMER CATALYST
Key: ACGIH=American Conference of Governmental Industrial CHRONIC TOXICITY
Hygienists; OSHA=Occupational Safety and Health Administration; Ingredient Target Organ/Chronic Effects:
TLV=Threshold Limit Value; TWA=Time Weighted Average; - Bone marrow and blood tissues - Blood - Carcinogen - Teratogen -
PEL=Permissible Exposure Limit (1989 Vacated values); IPEL=Internal Embryotoxin - Brain - Central nervous system - Lung - Ear - Kidney -
Permissible Exposure Limit; Ceiling=TLV or PEL Ceiling Limit; STEL=TLV Liver
or PEL Short-Term Exposure Limit; Skin= Skin Absorption Designation.
[C- Ceiling Limit; S-Potential Skin Absorption; R-Respirable Dust]
Mutagenicity Toxicity:
Additional Information Not applicable.
This has not been tested for this product.
Reproductive Toxicity:
SECTION 9 - PHYSICAL & CHEMICAL PROPERTIES This has not been tested for this product.
(FORMULA VALUES, NOT SALES SPECIFICATIONS)
SPECIFIC GRAVITY: .862
SUPPLEMENTAL HEALTH INFORMATION:
PHYSICAL STATE: Liquid
Material/ Percent
Percent Solids: 17.40
CAS Ingredient Specific Animal Data:
Percent Volatile by Volume: 84.540 Number
pH: Not available. 2- 5 - 10 This product contains an ethylene series glycol ether
ODOR THRESHOLD: Not available. BUTOXYET and/or acetate which has been shown to cause adverse
Vapour Pressure: 23.7 mmHg HYL effects on the kidneys, liver, blood and/or blood-forming
ODOR/APPEARANCE: Viscous liquid with an odor ACETATE tissue. Possible cancer hazard. Long-term exposure to an
112-07-2 ingredient(s) in this product has produced tumors in
characteristic of the solvents listed in
laboratory animals.
Section 2.
VAPOR DENSITY: HEAVIER THAN AIR
Evaporation Rate: 186 SECTION 12 - ECOLOGICAL INFORMATION
BOILING POINT OR RANGE: 180 - 392Degrees F POTENTIAL ENVIRONMENTAL EFFECTS
Freezing Point or Range: Not Applicable. Ecotoxicity: No Information Available.
Melting Point or Range(掳C): Not Applicable.
Partition coefficient (n- Not Applicable.
ENVIRONMENTAL FATE
octanol/water):
Mobility: No information available.
WEIGHT PER GALLON: 7.18 (U.S.) / 8.6 (IMPERIAL)
Biodegradation: No information available.
Bioaccumulation: No Information Available.
SECTION 10 - STABILITY AND REACTIVITY
PHYSICAL/CHEMICAL
STABILITY:
This product is normally stable and will not undergo hazardous reactions. Hydrolysis: No information available.
CONDITIONS TO AVOID: Photolysis: No information available.
None Known.
INCOMPATIBLE MATERIALS:
SECTION 13 - DISPOSAL CONSIDERATIONS
Avoid contact with strong alkalies, strong mineral acids, or strong
Provide maximum ventilation, only personnel equipped with proper
oxidizing agents.
respiratory and skin and eye protection should be permitted in the area.
HAZARDOUS POLYMERIZATION:
Take up spilled material with sawdust, vermiculite, or other absorbent
None Known.
material and place in containers for disposal.
HAZARDOUS DECOMPOSITION PRODUCTS:
Waste material must be disposed of in accordance with federal, state,
- Carbon monoxide - Carbon dioxide - Oxides of nitrogen - Lower
provincial and local environmental control regulations. Empty containers
molecular weight polymer fractions
should be recycled by an appropriately licensed reconditioner/salvager or
disposed of through a permitted waste management facility. Additional
disposal information is contained on the Environmental Data Sheet for
this product, which can be obtained from your PPG representative.
SECTION 11 - TOXICOLOGICAL INFORMATION
ACUTE TOXICITY
SECTION 14 - TRANSPORTATION INFORMATION
Material/ Percent ORAL DERMAL INHALATION Proper Shipping Name: NOT AVAILABLE
CAS Number LD50 (g/kg) LD50 (g/kg) LC50 (mg/l)
NOS Technical Name: NOT AVAILABLE
ISOPROPYL 15 - 40 4.40 g/kg 12.80 g/kg 72.60 g/L. 4 hr.
Hazard Class: N.A.
ALCOHOL
Subsidiary Class(es): N.A.
67-63-0
UN Number: N.A.
PROPYLENE 7 - 13 5.20 g/kg 13.00 g/kg 54.60 g/L. 4 hr.
Packing Group: N.A.
GLYCOL
MONOMETHYL
ETHER
USA - RQ Hazardous Substances: NOT AVAILABLE
107-98-2
USA-RQ Hazardous Substance NOT AVAILABLE
TOLUENE 7 - 13 .64 g/kg 8.39 g/kg 12.50 g/L. 4 hr.
108-88-3 Threshold Ship Weight:
XYLENES 5 - 10 4.30 g/kg 1.70 g/kg 21.88 g/L. 4 hr. Marine Pollutant Name: NOT AVAILABLE
1330-20-7
2-BUTOXYETHYL 5 - 10 1.60 g/kg 1.48 g/kg Not Available
SECTION 15 - REGULATORY INFORMATION
ACETATE
INVENTORY STATUS
112-07-2
__________________________________________________________________
Page 3 of 4
_______________________________________________________________________________________________________________
Refinish Products
19699 Progress Drive
Strongsville, OH 44149
Product ID: DP401 (0808)
PRODUCT NAME: EPOXY PRIMER CATALYST
U.S. TSCA: This product and/or all of its components are listed on the PREPARED BY: Product Safety Department
U.S. TSCA Inventory or is otherwise exempt from TSCA Inventory REASON FOR REVISION: Section 11 has been updated. Section 1 has
reporting requirements. been updated. Section 3 has been updated. Section 2 has been updated.
FEDERAL REGULATIONS Changes to this section may also result in changes in sections 8, 11
US Regulations and/or 15. Section 4 has been updated.
Updated MSDS
Material/ Percent
CAS Number CERCLA HS - SARA EHS- SARA 313 format.
RQ (LBS) TPQ (LBS)
ISOPROPYL 15 - 40 Not Listed Not Listed Not Listed This Material Safety Data Sheet has been prepared in accordance with
ALCOHOL
Canada's Workplace Hazardous Materials Information System (WHMIS)
67-63-0
and the OSHA Hazard Communication Standard (29 CFR 1910.1200),
N.J. TRADE 10 - 30 Not Listed Not Listed Not Listed
the supplier notification requirements of SARA Title III, Section 313 and
SECRET
other applicable right-to-know regulations.
#80100337-5132
Additional environmental information is contained on the Environmental
PROPYLENE 7 - 13 Not Listed Not Listed Not Listed Data Sheet for this product, which can be obtained from your PPG
GLYCOL representative.
MONOMETHYL DP401 000016 (00405647.001)(05/25/06)
ETHER
060525, 000, 0808
107-98-2
TOLUENE 7 - 13 1000 lbs Not Listed Listed
*** END OF MSDS ***
108-88-3
XYLENES 5 - 10 100 lbs Not Listed Listed
1330-20-7
2-BUTOXYETHYL 5 - 10 Not Listed Not Listed Not Listed
ACETATE
112-07-2
OXO-HEPTYL 1-5 Not Listed Not Listed Not Listed
ACETATE
90438-79-2
(As Glycol ethers) * Not Listed Not Listed Listed
112-07-2
SARA 311/312
Health (acute): Yes
Health (chronic): Yes
Fire (flammable): Yes
Pressure: No
Reactivity: No
WHMIS HAZARD CLASS: - Class B, Division 2 - Class D, Division 2,
Subdivision A - Class D, Division 2, Subdivision B
STATE/PROVINCIAL REGULATIONS
CALIFORNIA PROP. 65: WARNING: This product contains a chemical
known to the State of California to cause birth defects or other
reproductive harm.
Additional Information
Key: IARC- International Agency on the Research of Cancer; ACGIH-
American Conference of Governmental Industrial Hygienists; NTP-
National Toxicology Program *Denotes chemical as NTP Known
Carcinogen; + Denotes NTP Possible Carcinogen; OSHA-
Occupational Safety and Health Administration.
SECTION 16 - OTHER INFORMATION
Hazard Rating Systems
NFPA Rating: 2 30
HMIS Rating: 2*30
Rating System: 0=Minimal, 1=Slight, 2=Moderate, 3=Serious, 4=Severe,
*=Chronic Effects.
HMIS=Hazardous Materials Identification System; NFPA=National Fire
Protection Association;
Safe handling of this product requires that all of the information on the
MSDS be evaluated for specific work environments and conditions of use.
__________________________________________________________________
Page 4 of 4
|