Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

1330-20-7
100-41-4

File Name: davidson_com_au---m-coat-a.asp
                      Material Safety Data Sheet
Page 1 of 6 Issue date: September 2004

M-COAT A
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Davidson Measurement Pty. Ltd
ACN: 005 031 961 ABN: 29 005 031 961
Phone: 03 9580 4366
Fax: 03 9580 6499
Email: info@davidson.com.au
Web: www.davidson.com.au
Address: 1-3 Lakewood Boulevard,
Braeside, Victoria, 3195.
Product Name: M -COAT A
Manufacturer's Product Code: MGM020K
Use: General-purpose "transparent" protective coating.

2. HAZARDS IDENTIFICATION
Hazardous according to the EU criteria

Hazard Category: Harmful (Xn), Irritant (Xn), Flammable (F)

Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOODS.

RISK PHRASES
R10 Flammable
R20/21 Harmful by inhalation and in contact with skin.
R38 Irritating to skin.
R65 Harmful: May cause lung damage if swallowed.

SAFETY PHRASES
S2 Keep out of reach of children.
S16 Keep away from sources of ignition - No smoking.
S24/25 Avoid contact with skin and eyes.
S29 Do not empty into drains.
S62 If swallowed, do not induce vomiting; Seek medical advice immediately and show this container or label.

Poison Schedule: S6 [Aust]
This product is a Scheduled (S6) Poison and must be stored, handled and used according to the appropriate regulations.

Warning Statement:
Product is flammable, avoid all sources of ignition. Harmful by all routes, if swallowed, may be aspirated into lungs
leading to chemical pneumonitis.

3. COMPOSITION / INFORMATION ON INGREDIENTS
SUBSTANCE NAME Proportion CAS Number
XYLENE 30 to 60 % 1330-20-7
OIL MODIFIED POLYURETHANE 30 to 60 % Proprietary
ETHYL BENZENE 1 to < 10 % 100-41-4

All other ingredients determined not to be hazardous according to the EU criteria.

4. FIRST AID MEASURES
Swallowed:
If swallowed, DO NOT induce vomiting. Give a glass of water to drink. If vomiting occurs spontaneously, keep head
below hips to prevent aspiration of liquid into the lungs. Seek urgent medical assistance.
Material Safety Data Sheet
Page 2 of 6 Issue date: September 2004

M-COAT A
4. FIRST AID MEASURES (Continued)
Eye:
If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open.
Immediately transport to hospital or doctor.

Skin:
If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with soap and water.
If irritation persists immediately transport to hospital or doctor.

Inhaled:
Remove victim to fresh air. Apply resuscitation if victim is not breathing - Administer oxygen if breathing is difficult.

First Aid Facilities:
Eye wash fountain, safety shower and normal wash room facilities.

Advice to Doctor:
Treat symptomatically.
In case of poisoning, contact Poisons Information Centre
In Australia call Tel: 131126
In New Zealand Tel: 034747000

5. FIRE-FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA: Use dry chemical, carbon dioxide or foam.
UNUSUAL FIRE AND EXPLOSION HAZARDS: If tanks, drums or containers of this material are heated, they may
rupture and project corrosive liquids over a wide area.
HAZARDS FROM COMBUSTION PRODUCTS: Under fire conditions, toxic and corrosive fumes are emitted. On
combustion or on thermal decomposition (pyrolysis), there will be a release of oxides of carbon and oxides of nitrogen.
PRECAUTIONS FOR FIRE FIGHTERS AND SPECIAL PROTECTIVE EQUIPMENT: Self-contained
breathing apparatus (SCBA) required for fire -fighting personnel. If possible to do so safely, shut off fuel to fire. Use
water spray to spray to cool fire-exposed surfaces and to protect personnel.

Hazchem Code: 3[Y] [Aust]

Flammability:
This material is a FLAMMABLE liquid.
Flash Point: 26掳C
Flammability Limits (vol / vol %): Lower: 1.0 Upper: 7.0

6. ACCIDENTAL RELEASE MEASURES
Emergency Procedures:
Flammable liquid. Avoid all sources of ignition. Keep unnecessary people away; Isolate hazard area and deny entry.
Ventilate area. Wear suitable protective equipment as outlined under personal protection in this MSDS.

Methods and Materials for Containment and Clean Up Procedures:
Throw vermiculite or diatomaceous earth onto spill. DO NOT use sawdust. Use non-sparking tools or HEPA vacuum
system to pick up. Place into labelled drum(s) for later disposal.

Emergency information(Transport):
Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB76:1997)
For LIQUIDS - Flammable, Guide No: 15

7. HANDLING AND STORAGE
Precautions for Safe Handling:
Flammable liquid. Avoid ignition sources. Do not swallow. Avoid direct or prolonged contact with skin. Provide
adequate ventilation.
Material Safety Data Sheet
Page 3 of 6 Issue date: September 2004

M-COAT A
7. HANDLING AND STORAGE (Continued)
Conditions for Safe Storage:
Keep containers tightly closed, when not using the product. Store in original packages as approved by manufacturer.
Store in an area that is dry and well-ventilation away from ignition sources. Store below 278 C. Store away from
strong alkalis, acids and oxidizing agents. For further information please refer to the Engineering Controls of this
MSDS.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards

No exposure standards are available for this product, however, the following exposure standards have been assigned by
[NOHSC] to the following com ponents of the product:

XYLENE
[NOHSC]
3
[TWA]80 ppm 350 mg/m
3
[STEL]150 ppm 655 mg/m

Notices: A;R

ETHYL BENZENE
[NOHSC]
3
[TWA]100 ppm 434 mg/m
3
[STEL]125 ppm 543 mg/m

Notices: H;R

Engineering Controls
Flammable liquid. Maintain adequate ventilation at all times. Prevent accumulation of vapours in hollows or sumps.
Eliminate any sources of ignition.

Personal Protection Equipment
GLOVES: The use of nitrile gloves is recommended.
EYES : Chemical goggles or spectacles to protect eyes.
RESPIRATORY PROTECTION: Avoid breathing of vapours. Select and use respirators in accordance with AS/NZS
1715/1716. When vapours exceed the exposure standards then the use of a half-face respirator fitted with an organic
vapour cartridge is recommended. For high concentration use an atmosphere-supplied, positive pressure demand self-
contained or airline breathing apparatus, complying with the requirements of AS/NZS 1715 is recommended. Filter
capacity and respirator type depends on exposure levels and type of contaminant.

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Amber liquid with solvent odour.
Boiling Point: 137掳C
Vapour Pressure: Not available.
Specific Gravity: 0.96
Flash Point: 26掳C
Flammability Limits: LEL: 1.0 % UEL: 7.0 %
Solubility in Water: Negligible.

Other Properties
Vapor Density (Air = 1): 3.6
Evaporation Rate (BuAc = 1): 0.6
Volatile Organic Compounds : 589 g/L
Material Safety Data Sheet
Page 4 of 6 Issue date: September 2004

M-COAT A
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY:
Stable under normal conditions of use.

CONDITIONS TO AVOID:
Ignition sources and mixing with incompatibles.

INCOMPATIBLE MATERIALS:
Strong oxidizing agents.

HAZARDOUS DECOMPOSITION PRODUCTS:
Decomposes on heating emitting oxides of carbon and oxides of nitrogen.

HAZARDOUS REACTIONS:
Will not occur.

11. TOXICOLOGICAL INFORMATION
ACUTE HEALTH EFFECTS
Swallowed:
May cause irritation to mouth, throat and stomach with effects including mucous build up, irritation to the tongue and
lips and pains in the stomach, which may lead to nausea, vomiting and diarrhoea. There is some indication that if this
product is vomited, that it may be aspirated into the lungs leading to potential chemical pneumonitis which may be
evidenced by coughing, laboured breathing and cyanosis (bluish skin).

Eye:
May cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision.

Skin:
Harmful by skin contact. Product may be absorbed through the skin with resultant toxic effects.
Will cause irritation to the skin, with effects including; Redness, itchiness, and drying/defatting.

Inhaled:
Harmful if inhaled. May cause central nervous system effects including; lightheadedness, nausea, headache, and ataxia
at low doses and confusion, respiratory depression, and coma at high doses.

May cause irritation to the nose, throat and respiratory system with effects including: Dizziness, headache narcosis,
staggering-gait and loss of co-ordination.

Chronic:
Prolonged or repeated skin contact may lead to dermatitis.

Xylene:
Oral LD50(rat): 4,300 mg/kg
Dermal LD50(rabbit): >1,700 mg/kg
Inhalation LC50(rat): 5,000 ppm/4H

Irritation Eye Rabbit: 87 mg mild (Std. Draize)
Irritation Skin Rabbit: 500 mg/24 Hr (Moderate, Std. Draize)

There is no conclusive evidence of xylene causing carcinogenic, mutagenic or teratogenic (toxic to reproduction)
effects.

Ethyl Benzene:

Oral LD50(rat): 3,500 mg/kg
Dermal LD50(rabbit): 17.800 碌L/Kg
Material Safety Data Sheet
Page 5 of 6 Issue date: September 2004

M-COAT A
12. ECOLOGICAL INFORMATION
No information is available for this product, however, large quantities if spilt should be considered to be an
environmental hazard similar to an oil spill..

13. DISPOSAL CONSIDERATIONS
Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise flammable
nature.

14. TRANSPORT INFORMATION
Road Transport:
UN Number: 1993
Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains XYLENE)
Dangerous Goods Class: 3
Packing Group: III
Labels: Harmful (Xn), Irritant (Xn), Flammable (F)

Marine Transport:
UN Number: 1993
Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains XYLENE)
Dangerous Goods Class: 3
Packing Group: III
Labels: Harmful (Xn), Irritant (Xn), Flammable (F)

Air Transport:
UN Number: 1993
Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains XYLENE)
Dangerous Goods Class: 3
Packing Group: III
Labels: Harmful (Xn), Irritant (Xn), Flammable (F)

15. REGULATORY INFORMATION
Poison Schedule: S6 [Aust]
This product is a Scheduled (S6) Poison and must be stored, handled and used according to the appropriate regulations.

Inventory Status:
Australia (AICS) Y
United States (TSCA) Y
Canada (DSL) Y
Europe (EINECS/ELINCS) Y
Japan (MITI) Y
South Korea (KECL) Y

Y = all ingredients are on the inventory.
Material Safety Data Sheet
Page 6 of 6 Issue date: September 2004

M-COAT A
16. OTHER INFORMATION
Date of Preparation:

Issue date: September 14, 2004

Reasons for Update:
nd
1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets
[NOHSC:2001(2003)].
2. Changes and /or addition made to all sections.

Key Legend Information:
NOHSC - National Occupational Health & Safety Commission [Aust]
TWA - Time Weighted Average [Int]
STEL - Short Term Exposure Limit [Int]
AICS - Australian Inventory of Chemical Substances
EPA - Environmental Protection Agency [Int]
NIOSH - National Institute for Occupational Safety and Health [US]
AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]
AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]
(SAA/SNZ HB76:1997) - Dangerous Goods - Initial Emergency Response Guide [Aust/NZ]
IATA - International Aviation Transport Authority [Int]
ICAO - International Civil Aviation Organization
IMO - International Maritime Organisation. [Int]
IMDG - International Maritime Dangerous Goods
United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the
classification and labelling of Chemicals. [Int]
EU - European Union

[Aust/NZ] = Australian/New Zealand
[Int] = International
[US] = United States of America

Principal References:
Information supplied by manufacturer.

Disclaimer
To the best of our knowledge, the information provided above meets the requirements of European Union directives for
hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from
manufacturers of the original components. All animal test data has been obtained from the public domain, NO
ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form
of liability and/or responsibility for the application of this product.

End of MSDS

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
cps_screen_wash_t.asp 2004-01-1 34590-94-8 112-34-5 64742-47-8
crowmktg_com---cd-catalog-2007.asp N/A
custom-aerosol_com---generic-msds-acrylic-lacquer-aerosol.asp 67-64-1 1330-20-7 75-28-5 74-98-6 100-41-4 108-65-6 111-76-2 8052-41-3 107-98-2
custom-aerosol_com---msds-alv-aerosol-with-propellant.asp N/A
custom-aerosol_com---msds-custom-aerosol-aerosol-lacquer_12-2007.asp 67-64-1 75-28-5 1330-20-7 74-98-6 108-65-6 111-76-2 100-41-4 78-93-3 8052-41-3 107-98-2 1333-86-4
custom-aerosol_com---msds-custom-aerosol-lacquer-bulk_12-2007.asp 67-64-1 1330-20-7 108-65-6 100-41-4 78-93-3 8052-41-3 111-76-2 1333-86-4 107-98-2 108-88-3
custom-aerosol_com---msds-duranar-ads.asp 800-00-2
custom-aerosol_com---msds-ppg-acrylic-flourocarbon.asp N/A
custom-aerosol_com---msds-ppg-dp401lf.asp 800-00-2 111-76-2 1330-20-7 64742-95-6 67-63-0 68410-23-1 71-23-8 95-63-6
custom-aerosol_com---msds-ppg-dp40lf.asp 800-00-2 100-41-4 108-10-1 108-88-3 110-43-0 111-76-2 112926-00-8 1317-65-3 1330-20-7 1333-86-4 13463-67-7 14807-96-6 14808-60-7 25068-38-6 25086-48-0 64742-95-6 7727-43-7 95-63-6
custom-aerosol_com---msds-ppg-uc51760.asp 800-00-2 108-65-6 108-88-3 1332-58-7 13463-67-7 70657-70-4 7789-06-2 78-93-3
custom-aerosol_com---msds-unfilled-omni-fill.asp N/A
custom-aerosol_com---ppg-dp40-msds_6-29-2007.asp 78-93-3 25068-38-6 7727-43-7 110-19-0 123-86-4 800-00-2 7789-06-2 13463-67-7 14807-96-6 67-63-0 25086-48-0 107-98-2 108-88-3 763-69-9 1330-20-7 1333-86-4 100-41-4 14808-60-7 11103-86-9
custom-aerosol_com---ppg-dp401-msds_5-26-2006.asp 800-00-2
custom-aerosol_com---ppg-uc51760-msds_1-25-2007.asp 108-88-3 1332-58-7 108-65-6 13463-67-7 800-00-2 78-93-3 7789-06-2 85-68-7 70657-70-4
custom-aerosol_com---ppg-uc60400-msds_3-29-2007.asp 800-00-2
davidson_com_au---barrier_e.asp 14807-96-6 1333-86-4 1344-40-1 8052-42-4 1309-64-4
davidson_com_au---csm1a-degreaser.asp 1717-00-6 67-56-1 124-38-9
davidson_com_au---epoxylite_813_part_a.asp 14808-60-7 14807-96-6 25068-38-6 28064-14-4
davidson_com_au---epoxylite_813_part_b.asp 14808-60-7 14807-96-6 89-32-7
davidson_com_au---epoxy_br_22_part_a.asp 97-99-4 14808-60-7 14807-96-6 25068-38-6
davidson_com_au---epoxy_br_22_part_b.asp 14808-60-7 14807-96-6 89-32-7
davidson_com_au---gagekote_1.asp 108-88-3 1330-20-7
davidson_com_au---gagekote_11.asp 108-88-3
davidson_com_au---gagekote_5_part_b.asp 25068-38-6 97-99-4
davidson_com_au---gagekote_7_part_a.asp 25085-99-8 108-46-3
davidson_com_au---gagekote_7_part_b.asp 4246-51-9 111-40-0 90-72-2
davidson_com_au---gc-5-pumice.asp 1332-09-8 14808-60-7
davidson_com_au---gc_adhesive.asp 409-21-2 7732-18-5 1344-28-1 7664-38-2 7631-86-9 10043-35-3 64-17-5
davidson_com_au---h-cement.asp 14808-60-7 7664-38-2 1344-28-1 1308-38-9 1333-82-0
davidson_com_au---m-bond-200-adhesive.asp 7085-85-0 9011-14-7
davidson_com_au---m-bond-200-catalyst-c.asp 67-63-0 120-07-0
davidson_com_au---m-bond-300-catalyst.asp 131-11-3 1338-23-4 25265-71-8 7722-84-1
davidson_com_au---m-bond-300-resin.asp 100-42-5 96-09-3
davidson_com_au---m-bond-43-b.asp 78-93-3 1330-20-7 25068-38-6 123-42-2
davidson_com_au---m-bond-600-adhesive.asp 109-99-9 28064-14-4 78-93-3
davidson_com_au---m-bond-ae-10.asp 112-24-3
davidson_com_au---m-bond-curing-agent-10.asp 112-24-3
davidson_com_au---m-bond-ga-100-cement.asp 7631-86-9 14808-60-7 7732-18-5 13530-50-2 9000-65-1 1333-82-0 7664-38-2
davidson_com_au---m-coat-a.asp 1330-20-7 100-41-4
davidson_com_au---m-coat-c.asp 67-56-1 1185-55-3 8032-32-4 1330-20-7
davidson_com_au---m-line_450-20r.asp 7440-31-5 7440-36-0 8050-09-7
davidson_com_au---m-line_450-20s_solder.asp 7440-31-5 7440-36-0
davidson_com_au---m-line_570-25r.asp 7439-92-1 7440-31-5 8050-09-7 7440-22-4
davidson_com_au---m-line_rosin_solvent.asp 67-63-0 108-88-3
davidson_com_au---mbond-450-partb.asp N/A
davidson_com_au---mbond-610-adhesive.asp 109-99-9 28064-14-4 78-93-3
davidson_com_au---mbond-a-12part-b.asp 1344-28-1 112-24-3 13463-67-7
davidson_com_au---mbond-a-12_-part_a.asp 25068-38-6 14808-60-7 1344-28-1 1309-37-1
davidson_com_au---mbond-curing-agent-15.asp 104-78-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC