Search    ENTER KEYWORD
MSDS Material Safety Data Sheet
CAS

7631-86-9
14808-60-7
7732-18-5
13530-50-2
9000-65-1
1333-82-0
7664-38-2

File Name: davidson_com_au---m-bond-ga-100-cement.asp
                       Material Safety Data Sheet
Page 1 of 7 Issue date: September 2004

M-BOND GA-100 CEMENT
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Davidson Measurement Pty. Ltd
ACN: 005 031 961 ABN: 29 005 031 961
Phone: 03 9580 4366
Fax: 03 9580 6499
Email: info@davidson.com.au
Web: www.davidson.com.au
Address: 1-3 Lakewood Boulevard,
Braeside, Victoria, 3195.
Product Name: M -BOND GA -100 CEMENT
Manufacturer's Product Code: MGM018E
Use: Cement.

2. HAZARDS IDENTIFICATION
Classified as hazardous according to the EU criteria

Hazard Category: Toxic (T), Corrosive (C)

Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOODS.

RISK PHRASES
R36/38 Irritating to eyes and skin.
R43 May cause sensitisation by skin contact.
R49 May cause cancer by inhalation.

SAFETY PHRASES
S21 When using, do not smoke.
S24/25 Avoid contact with skin and eyes.
S26 In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or Poisons Information
Centre.
S36 Wear suitable protective clothing.
S38 In case of insufficient ventilation, wear suitable respiratory protection.
S45 In case of accident or if you feel unwell, contact a doctor or Poisons Information Centre immediately and show
this container or label.
S53 Avoid exposure - obtain special instructions before use.
S60 This material and/or its container must be disposed of as hazardous waste.
S61 Avoid release to the environment. Refer to special instructions/safety data sheet.

Poison Schedule: S6 [Aust]
This material is a Scheduled (S6) Poison and must be stored, handled and used according to the appropriate regulations.

Warning Statement:
Inhalation of this product may led to cancer. Skin contact may led to allergic contact dermatitis.

3. COMPOSITION / INFORMATION ON INGREDIENTS
SUBSTANCE NAME Proportion CAS Number
AMORPHOUS SILICA 30 to 60 % 7631-86-9
CRYSTALLINE SILICA - QUARTZ 10 to 30 % 14808-60-7
WATER 10 to 30 % 7732-18-5
PHOSPHORIC ACID, ALUMINIUM SALT (3:1) < 20 % 13530-50-2
GUM TRAGACANTH 1 to 10 % 9000-65-1
CHROMIUM TRIOXIDE 1 to 5 % 1333-82-0
PHOSPHORIC ACID <1 % 7664-38-2

All other ingredients determined not to be hazardous according to the EU criteria.
Material Safety Data Sheet
Page 2 of 7 Issue date: September 2004

M-BOND GA-100 CEMENT
4. FIRST AID MEASURES
Swallowed:
If swallowed, DO NOT induce vomiting. If victim is conscious give water to drink. Immediately transport to hospital or
doctor.

Eye:
If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open.
Urgently transport to hospital or doctor.

Skin:
If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with water and soap.
If irritation persists transport to hospital or doctor.

Inhaled:
Move victim to fresh air. Apply resuscitation if victim is not breathing.

First Aid Facilities:
Eye wash fountain, safety shower and normal wash room facilities.

Advice to Doctor:
Treat symptomatically.
In case of poisoning, contact Poisons Information Centre
In Australia call Tel: 131126
In New Zealand Tel: 034747000

5. FIRE-FIGHTING MEASURES
SUITABLE EXTINGUISHING MEDIA: Use extinguishing media suitable for surrounding fire situation.
HAZARDS FROM COMBUSTION PRODUCTS: Oxides of carbon, silicon, and possibly chromium.
PRECAUTIONS FOR FIRE FIGHTERS AND SPECIAL PROTECTIVE EQUIPMENT: Self-contained
breathing apparatus (SCBA) required for fire -fighting personnel. If possible to do so safely, shut off fuel to fire. Use
water spray to spray to cool fire-exposed surfaces and to protect personnel.

Hazchem Code: None allocated. [Aust]

Flammability
This material is not combustible or flammable liquid.

6. ACCIDENTAL RELEASE MEASURES
Emergency Procedures:
Keep unnecessary people away; Isolate hazard area and deny entry. Stay upwind; Keep out of low areas. Do not walk or
touch spilt material unless wearing personal protection as outlined under Personal Protection information of this MSDS.

Methods and Materials for Containment and Clean Up Procedures:
Neutralize spill with mild alkali (sodium bicarbonate, very dilute sodium hydroxide (caustic soda)) solution, add
cautiously and slowly to spill. Throw diatomaceous earth (kitty litter) onto spill. DO NOT use sawdust. Use non-
sparking tools. Place into labeled drum for later disposal.

7. HANDLING AND STORAGE
Precautions for Safe Handling:
Avoid contact with eyes and skin. Avoid breathing of vapours. Store in a cool place and out of direct sunlight. Store
away from sources of heat or ignition. Store away from oxidizing agents. Store below 278 C, to maximize shelf-life.
Material Safety Data Sheet
Page 3 of 7 Issue date: September 2004

M-BOND GA-100 CEMENT
7. HANDLING AND STORAGE (Continued)
Conditions for Safe Storage:
Keep containers tightly closed, when not using the product. Store in original packages as approved by manufacturer.
Store in an area that is dry and well-ventilation away from ignition sources. For further information please refer to the
Engineering Controls of this MSDS.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards

No exposure standards are available for this product, however, the following exposure standards have been assigned by
[NOHSC] to the following components of the product:

AMORPHOUS SILICA
[NOHSC]
[TWA]2 mg/m3

CRYSTALLINE SILICA - QUARTZ
[NOHSC]
[TWA]0.2 mg/m3

CHROMIUM TRIOXIDE
[NOHSC]
[TWA]0.5 mg/m3

PHOSPHORIC ACID
[NOHSC]
[TWA]1 mg/m3
[STEL]3 mg/m3

Notices: H

Engineering Controls
Maintain adequate ventilation at all times. In most circumstances natural ventilation systems are adequate unless the
material is heated, reacted or used in a confined space, then the use of a local exhaust ventilation system is
recommended.

Personal Protection Equipment
GLOVES: The use of neoprene or nitrile gloves is recommended.
EYES : Chemical goggles or spectacles with side shields to protect eyes.
RESPIRATORY PROTECTION: Avoid breathing of vapours. Select and use respirators in accordance with AS/NZS
1715/1716. The use of an acid gas vapour respirator with replaceable filters is recommended. Filter capacity and
respirator type depends on exposure levels and type of contaminant. If entering spaces where the airborne concentration
of a contaminant is unknown then the use of a Self-contained breathing apparatus (SCBA) with positive pressure air
supply complying with AS/NZS 1715 / 1716, or any other acceptable International Standard is recommended.

9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Material separates into dark amber liquid and yellow paste; acidic odor.
Boiling Point: 100掳C
Vapour Pressure: < 1 mmHg
Specific Gravity: Not available.
Flash Point: Not applicable.
Flammability Limits: Not applicable.
Solubility in Water: Insoluble.
Material Safety Data Sheet
Page 4 of 7 Issue date: September 2004

M-BOND GA-100 CEMENT
9. PHYSICAL AND CHEMICAL PROPERTIES (Continued)
Other Properties

Vapor Density (Air = 1): >1
Evaporation Rate (BuAc = 1): Slight
Volatile Organic Compounds : <10 g/liter

10. STABILITY AND REACTIVITY
CHEMICAL STABILITY:
Stable under normal conditions of use.

CONDITIONS TO AVOID:
Heat, strong reducing agents.

INCOMPATIBLE MATERIALS:
Combustible materials and strong reducing agents.

HAZARDOUS DECOMPOSITION PRODUCTS:
Oxides of carbon, silicon, and possibly chromium.

HAZARDOUS REACTIONS:
Will not occur.

11. TOXICOLOGICAL INFORMATION
ACUTE HEALTH EFFECTS
Swallowed:
May cause irritation to mouth, throat and stomach with effects including mucous build up, irritation to the tongue and
lips and pains in the stomach, which may lead to nausea, vomiting and diarrhoea.

Eye:
Will cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision. Depending upon
duration of exposure, eye damage may occur.

Skin:
Will cause irritation to the skin, with effects including; Redness, itchiness, and possible dermatitis. This product will
cause sensitisation by skin contact, which may lead to allergic contact dermatitis.

Inhaled:
Very toxic if inhaled. There is evidence to suggest that the inhalation of this product, over a period of time may lead to
the development of cancer. Will cause irritation to the nose, throat and respiratory system with effects including:
Dizziness, headache, coughing, loss of co-ordination and chest pains.

Chronic:
Prolonged or repeated skin contact may lead to dermatitis.
Prolonged contact may cause severe eye irritation and some form of permanent eye damage may occur.
Prolonged or repeated contact with this substance will cause sensitisation by skin contact.

Exposure to respirable crystalline quartz may cause delayed (chronic) lung disease known as silicosis; Acute or
rapidly developing silicosis may occur in a period of time in heavy exposure in certain occupations such as,
sandblasting, however, this can be minimized if

(a). Proper ventilation is employed and
(b) in the absence of ventilation a suitable respirator is used.
Material Safety Data Sheet
Page 5 of 7 Issue date: September 2004

M-BOND GA-100 CEMENT
11. TOXICOLOGICAL INFORMATION (Continued)
An (IARC) Working Group reported that there is sufficient evidence for the classification of crystalline silica as a
Confirmed Human Carcinogen (Group I) (IARC, 1997,V.68).

CHROMIUM TRIOXIDE has been classified as a CATEGORY 1 CARCINOGEN (WORKSAFE).
Established human carcinogens are those substances known to be carcinogenic to humans. There is sufficient evidence
to establish a casual association between human exposure to these substances and the development of cancer.
The following toxicological information is available for the ingredient:



CHROMIUM TRIOXIDE:

Oral LD5)(rat): 80 mg/kg

CLASSIFICATION
Results of occupational epidemiological studies of chromium-exposed workers are consistent across investigators and
study populations. Dose-response relationships have been established for chromium exposure and lung cancer.

12. ECOLOGICAL INFORMATION
ENVIRONMENTAL FATE:
When released into the soil, chromium may leach into ground water. Released into water, chromium compounds is not
expected to evaporate significantly.

ENVIRONMENTAL TOXICITY:
Chromium is toxic to aquatic life.

Avoid contaminating drains, sewers or waterways.

13. DISPOSAL CONSIDERATIONS
Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise of
chromium and crystalline silica presence in product.

14. TRANSPORT INFORMATION
UN Number: None allocated
Proper Shipping Name: NONE ALLOCATED
Dangerous Goods Class: None allocated
Subsidiary risk: None allocated
Packing Group: None allocated
Hazchem Code: None allocated

Road and Rail Transport:
Not classified as a Dangerous Good according to the Australian Code for the Transport of Dangerous Goods by Road
and Rail (ADG Code) for transport by road and rail.

Air Transport:
Not classified as a Dangerous Good according to the International Civil Aviation Organization (ICAO) and
International Air Transport Association (IATA) Dangerous Goods Regulations for transport by air.

Marine Transport:
Not classified as a Dangerous Good according to the International Maritime Organization Rules (Maritime Dangerous
Goods Code - IMDG Code) for transport by sea.
Material Safety Data Sheet
Page 6 of 7 Issue date: September 2004

M-BOND GA-100 CEMENT
15. REGULATORY INFORMATION
Poison Schedule: S6 [Aust]
This material is a Scheduled (S6) Po ison and must be stored, handled and used according to the appropriate regulations.

Inventory Status:
Australia (AICS) Y
United States (TSCA) Y
Canada (DSL) Y
Europe (EINECS/ELINCS) Y

Y = all ingredients are on the inventory.

16. OTHER INFORMATION
Date of Preparation:

Issue date: September 3, 2004 Supercedes: July 22, 2004, March 28, 2001

Reasons for Update:
nd
1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets
[NOHSC:2001(2003)].
2. Changes and /or addition made to all sections.

Key Legend Information:
NOHSC - National Occupational Health & Safety Commission [Aust]
SUSDP - Standard for the Uniform Scheduling of Drugs and Poisons [Aust]
TWA - Time Weighted Average [Int]
STEL - Short Term Exposure Limit [Int]
AICS - Australian Inventory of Chemical Substances
EPA - Environmental Protection Agency [Int]
NIOSH - National Institute for Occupational Safety and Health [US]
AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]
AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]
(SAA/SNZ HB76:1997) - Dangerous Goods - Initial Emergency Response Guide [Aust/NZ]
AS 1940 - The Storage and Handling of Flammable and Combustible Liquids [Aust]
IATA - International Aviation Transport Authority [Int]
ICAO - International Civil Aviation Organization [Int]
IMO - International Maritime Organisation. [Int]
IMDG - International Maritime Dangerous Goods [Int]
United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the
classification and labelling of Chemicals. [Int]
EU - European Union [Int]

[Aust/NZ] = Australian/New Zealand
[Int] = International
[US] = United States of America

Principal References:
Information supplied by manufacturer.

Disclaimer
To the best of our knowledge, the information provided above meets the requirements of European Union directives for
hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from
manufacturers of the original components. All animal test data has been obtained from the public domain, NO
ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form
of liability and/or responsibility for the application of this product.
End of MSDS

Search    ENTER KEYWORD
ALL Chemical Property And Toxicity Analysis PAGES IN THIS GROUP
NAMECAS
cps_screen_wash_t.asp 2004-01-1 34590-94-8 112-34-5 64742-47-8
crowmktg_com---cd-catalog-2007.asp N/A
custom-aerosol_com---generic-msds-acrylic-lacquer-aerosol.asp 67-64-1 1330-20-7 75-28-5 74-98-6 100-41-4 108-65-6 111-76-2 8052-41-3 107-98-2
custom-aerosol_com---msds-alv-aerosol-with-propellant.asp N/A
custom-aerosol_com---msds-custom-aerosol-aerosol-lacquer_12-2007.asp 67-64-1 75-28-5 1330-20-7 74-98-6 108-65-6 111-76-2 100-41-4 78-93-3 8052-41-3 107-98-2 1333-86-4
custom-aerosol_com---msds-custom-aerosol-lacquer-bulk_12-2007.asp 67-64-1 1330-20-7 108-65-6 100-41-4 78-93-3 8052-41-3 111-76-2 1333-86-4 107-98-2 108-88-3
custom-aerosol_com---msds-duranar-ads.asp 800-00-2
custom-aerosol_com---msds-ppg-acrylic-flourocarbon.asp N/A
custom-aerosol_com---msds-ppg-dp401lf.asp 800-00-2 111-76-2 1330-20-7 64742-95-6 67-63-0 68410-23-1 71-23-8 95-63-6
custom-aerosol_com---msds-ppg-dp40lf.asp 800-00-2 100-41-4 108-10-1 108-88-3 110-43-0 111-76-2 112926-00-8 1317-65-3 1330-20-7 1333-86-4 13463-67-7 14807-96-6 14808-60-7 25068-38-6 25086-48-0 64742-95-6 7727-43-7 95-63-6
custom-aerosol_com---msds-ppg-uc51760.asp 800-00-2 108-65-6 108-88-3 1332-58-7 13463-67-7 70657-70-4 7789-06-2 78-93-3
custom-aerosol_com---msds-unfilled-omni-fill.asp N/A
custom-aerosol_com---ppg-dp40-msds_6-29-2007.asp 78-93-3 25068-38-6 7727-43-7 110-19-0 123-86-4 800-00-2 7789-06-2 13463-67-7 14807-96-6 67-63-0 25086-48-0 107-98-2 108-88-3 763-69-9 1330-20-7 1333-86-4 100-41-4 14808-60-7 11103-86-9
custom-aerosol_com---ppg-dp401-msds_5-26-2006.asp 800-00-2
custom-aerosol_com---ppg-uc51760-msds_1-25-2007.asp 108-88-3 1332-58-7 108-65-6 13463-67-7 800-00-2 78-93-3 7789-06-2 85-68-7 70657-70-4
custom-aerosol_com---ppg-uc60400-msds_3-29-2007.asp 800-00-2
davidson_com_au---barrier_e.asp 14807-96-6 1333-86-4 1344-40-1 8052-42-4 1309-64-4
davidson_com_au---csm1a-degreaser.asp 1717-00-6 67-56-1 124-38-9
davidson_com_au---epoxylite_813_part_a.asp 14808-60-7 14807-96-6 25068-38-6 28064-14-4
davidson_com_au---epoxylite_813_part_b.asp 14808-60-7 14807-96-6 89-32-7
davidson_com_au---epoxy_br_22_part_a.asp 97-99-4 14808-60-7 14807-96-6 25068-38-6
davidson_com_au---epoxy_br_22_part_b.asp 14808-60-7 14807-96-6 89-32-7
davidson_com_au---gagekote_1.asp 108-88-3 1330-20-7
davidson_com_au---gagekote_11.asp 108-88-3
davidson_com_au---gagekote_5_part_b.asp 25068-38-6 97-99-4
davidson_com_au---gagekote_7_part_a.asp 25085-99-8 108-46-3
davidson_com_au---gagekote_7_part_b.asp 4246-51-9 111-40-0 90-72-2
davidson_com_au---gc-5-pumice.asp 1332-09-8 14808-60-7
davidson_com_au---gc_adhesive.asp 409-21-2 7732-18-5 1344-28-1 7664-38-2 7631-86-9 10043-35-3 64-17-5
davidson_com_au---h-cement.asp 14808-60-7 7664-38-2 1344-28-1 1308-38-9 1333-82-0
davidson_com_au---m-bond-200-adhesive.asp 7085-85-0 9011-14-7
davidson_com_au---m-bond-200-catalyst-c.asp 67-63-0 120-07-0
davidson_com_au---m-bond-300-catalyst.asp 131-11-3 1338-23-4 25265-71-8 7722-84-1
davidson_com_au---m-bond-300-resin.asp 100-42-5 96-09-3
davidson_com_au---m-bond-43-b.asp 78-93-3 1330-20-7 25068-38-6 123-42-2
davidson_com_au---m-bond-600-adhesive.asp 109-99-9 28064-14-4 78-93-3
davidson_com_au---m-bond-ae-10.asp 112-24-3
davidson_com_au---m-bond-curing-agent-10.asp 112-24-3
davidson_com_au---m-bond-ga-100-cement.asp 7631-86-9 14808-60-7 7732-18-5 13530-50-2 9000-65-1 1333-82-0 7664-38-2
davidson_com_au---m-coat-a.asp 1330-20-7 100-41-4
davidson_com_au---m-coat-c.asp 67-56-1 1185-55-3 8032-32-4 1330-20-7
davidson_com_au---m-line_450-20r.asp 7440-31-5 7440-36-0 8050-09-7
davidson_com_au---m-line_450-20s_solder.asp 7440-31-5 7440-36-0
davidson_com_au---m-line_570-25r.asp 7439-92-1 7440-31-5 8050-09-7 7440-22-4
davidson_com_au---m-line_rosin_solvent.asp 67-63-0 108-88-3
davidson_com_au---mbond-450-partb.asp N/A
davidson_com_au---mbond-610-adhesive.asp 109-99-9 28064-14-4 78-93-3
davidson_com_au---mbond-a-12part-b.asp 1344-28-1 112-24-3 13463-67-7
davidson_com_au---mbond-a-12_-part_a.asp 25068-38-6 14808-60-7 1344-28-1 1309-37-1
davidson_com_au---mbond-curing-agent-15.asp 104-78-9

Free MSDS Search ( Providing 250,000+ Material Properties )
Chemcas.com | Ads link:HBCCHEM.INC