Material Safety Data Sheet

                                Page 1 of 7                Issue date: January 2005



                                       M-BOND A-12 (Part A)

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Davidson Measurement Pty. Ltd

ACN: 005 031 961 ABN: 29 005 031 961

Phone: 03 9580 4366

Fax: 03 9580 6499

Email: info@davidson.com.au

Web: www.davidson.com.au

Address: 1-3 Lakewood Boulevard,

         Braeside, Victoria, 3195.

Product Name: M -BOND A-12 (Part A)

Manufacturer's Product Code: MGM004E



Use: Two-component epoxy system for general purpose strain gage adhesive.



2. HAZARDS IDENTIFICATION

HAZARDOUS ACCORDING TO EU CRITERIA



Hazard Category: Irritant (Xi )



Hazard Classification: HAZARDOUS SUBSTANCE, NON-DANGEROUS GOOD



RISK PHRASES

R36/38 Irritating to eyes and skin.

R43 May cause sensitisation by skin contact.



SAFETY PHRASES

S2 Keep out of reach of children.

S21 When using, do not smoke.

S22 Do not breathe dust.

S24/25 Avoid contact with skin and eyes.

S28 After contact with skin, wash immediately with plenty of soap and water.

S37/39 Wear suitable gloves and eye/face protection.

S38 In case of insufficient ventilation, wear suitable respiratory protection.



Poison Schedule: S5 [Aust]

This material is a Scheduled S5 Poison and must be stored, handled and used according to the appropriate regulations..



Warning Statement:

Always maintain adequate ventilation. This product may cause sensitisation by skin contact. This product contains

crystalline silica, however, it is encapsulated in the resin, only if the cured product is machined, dusts be generated that

will contain crystalline silica, a confirmed human carcinogen.



3. COMPOSITION / INFORMATION ON INGREDIENTS

SUBSTANCE NAME                                                    Proportion        CAS Number



BISPHENOL A- REACTION PRODUCT                                     > 60 %            25068-38-6

CRYSTALLINE SILICA - QUARTZ                                       1 to < 10 %       14808-60-7

ALUMINIUM OXIDE                                                   1 to < 10 %       1344-28-1

IRON OXIDE                                                        1 to < 10 %       1309-37-1



All other ingredients not hazardous according to EU Criteria.

                       Material Safety Data Sheet

                               Page 2 of 7                Issue date: January 2005



                                      M-BOND A-12 (Part A)

4. FIRST AID MEASURES

Swallowed:

If swallowed, DO NOT induce vomiting. If concious, give 1 to 2 glasses of water to drink. Seek immediate medical ass

istance.

Eye:

If material is splashed into eyes, immediately, flush with plenty of water for 15 minutes, ensuring eye lids are held open

. If irritation persists transport to hospital or doctor.

Skin:

If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with soap and water.

If irritation persists transport to hospital or doctor.

Inhaled:

Move victim to fresh air. Apply resuscitation if victim is not breathing.

First Aid Facilities:

Eye wash fountain, safety shower and normal wash room facilities.

Advice to Doctor:

Treat symptomatically.

In case of poisoning, contact Poisons Information Centre

In Australia call Tel: 131126

In New Zealand Tel: 034747000



5. FIRE-FIGHTING MEASURES

Fire/Explosion Hazard

If safe to do so, move undamaged containers from fire area.

Suitable Extinguishing Media: Use extinguishing media suitable for surrounding fire situation.

Hazards From Combustion Products: Decomposes on heating emitting oxides of carbon, sulfur and nitrogen entities.

Precautions for Fire Fighters and Special Protective Equipment: Fire fighters to wear Self-contained breathing

apparatus (SCBA) in confined spaces, in oxygen deficient atmospheres or if exposed to products of decomposition. Full

protective clothing is also recommended.



HAZCHEM CODE: None allocated [Aust]



FLAMMABILITY

This product is a COMBUSTIBLE (C1) LIQUID and must be stored, handled and used according to the requirements

of AS 1940 - The Storage and Handling of Flammable and Combustible Liquids.



6. ACCIDENTAL RELEASE MEASURES

Emergency Procedures:

Keep unnecessary people away; Isolate hazard area and deny entry. If product spills onto floors it will represent a slip

hazard, walk cautiously. Wear protective equipment to prevent skin and eye contact, as outlined under personal

protection in this MSDS.



Methods and Materials for Containment and Clean Up Procedures:

Dike area using with an absorbent such as diatomaceous earth - to prevent run off into drains and waterways. Throw

further absorbent (diatomaceous earth or other inert material) on top of spill, then shovel up and seal in properly labeled

containers for disposal.



7. HANDLING AND STORAGE

Precautions for Safe Handling:

Store away from all source of ignition. Store away from oxidizing agents. Store in a cool place and out of direct

sunlight. For further information please refer to the Engineering Controls of this MSDS.



Conditions for Safe Storage:

Keep containers tightly closed, when not using this product. Store in original packages as approved by manufacturer.

                      Material Safety Data Sheet

                               Page 3 of 7               Issue date: January 2005



                                      M-BOND A-12 (Part A)

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure Standards



No exposure standards are available for this product, however, the following exposure standards have been assigned by

[NOHSC] to the following components of the product:



BIS PHENOL F EPOXY

[NOHSC]

No exposure standards.



Notices: Sen



Sen Notation:

Some substances can cause a specific immune response in some people. Such substances are called sensitisers and the

development of a specific immune response is termed 'sensitisation'. Exposure to a sensitiser, once sensitisation has

occurred, may manifest itself as a skin rash or inflammation or as an asthmatic condition, in many situations, only a

small dose which may be far below a TWA or STEL, in some susceptible individuals this may trigger violent and

severe adverse reactions.



CRYSTALLINE SILICA - QUARTZ

[NOHSC]

[TWA]0.2 mg/m3



ALUMINIUM OXIDE

[NOHSC]

[TWA]10 mg/m3



References: H



IRON OXIDE

[NOHSC]

[TWA]5 mg/m3



References: H



Engineering Controls

Maintain adequate ventilation at all times. Depending upon application of this product and the likelihood of exposure,

the use of a local exhaust ventilation system would be recommended.



Personal Protection Equipment

GLOVES: The use of neoprene or nitrile is recommended.

EYES: Chemical goggles or faceshield to protect eyes.

RESPIRATORY PROTECTION: Avoid breathing of mists. Select and use respirators in accordance with AS/NZS

1715/1716. The use of a dust mask (disposable) or a half-face respirator with P1 filter is recommended. Filter capacity

and respirator type depends on exposure levels and type of contaminant. If entering spaces where the airborne

concentration of a contaminant is unknown then the use of a Self-contained breathing apparatus (SCBA) with positive

pressure air supply complying with AS/NZS 1715 / 1716, or any other acceptable International Standard is

recommended.

                       Material Safety Data Sheet

                                Page 4 of 7                Issue date: January 2005



                                       M-BOND A-12 (Part A)

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance:                          Brown viscous liquid; faint epoxy odor.

Boiling Point:                       Not available.

Vapour Pressure:                     Not available.

Specific Gravity:                    1.26

Flash Point:                         118°C

Flammability Limits:                 Not available.

Solubility in Water:                 Insoluble.



Other Properties

Vapor Density (Air = 1): Not available.



10. STABILITY AND REACTIVITY

CHEMICAL STABILITY:

Stable under normal conditions of use.



CONDITIONS TO AVOID:

Ignition sources and mixing with incompatibles.



INCOMPATIBLE MATERIALS:

Strong mineral acids (sulfuric, nitric and hydrochloric), and oxidizing agents.



HAZARDOUS DECOMPOSITION PRODUCTS:

Decomposes on heating emitting oxides of carbon, oxides of nitrogen, oxides of silicon and other decomposition

products.



HAZARDOUS REACTIONS:

Will not occur.



11. TOXICOLOGICAL INFORMATION

ACUTE HEALTH EFFECTS:

Swallowed:

May cause irritation to mouth, throat and stomach with effects including pains in the stomach, which may lead to

nausea, vomiting and diarrhoea.



Eye:

Will cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision.



Skin:

Will cause irritation to the skin, with effects including; Redness, itchiness, and drying/defatting.



Inhaled:

Very toxic if inhaled.

Mists or vapours will cause irritation to the nose, throat and respiratory system with effects including: Dizziness,

headache, coughing, loss of co-ordination and chest pains.



Chronic:

Prolonged or repeated skin contact may lead to dermatitis.

Prolonged or repeated inhalation of extremely high concentrations of dusts from this product exposure may lead to

cancer. Prolonged or repeated contact with this substance will cause sensitisation by skin contact.



BISPHENOL A-(EPICHLORHYDRIN):



Oral LD50(rat): > 4,000 mg/kg

Dermal LD50(rabbit): 20,000 mg/kg

                      Material Safety Data Sheet

                               Page 5 of 7               Issue date: January 2005



                                      M-BOND A-12 (Part A)

11. TOXICOLOGICAL INFORMATION (Continued)

EPOXY RESINS:



Epoxy resins can irritate the skin, eyes, and respiratory tract. However, acute toxicity is generally low.

Generally the toxicity of an epoxy resin decreases with increasing molecular weight of the polymer. Exposure to cured

resin dust from sanding, grinding, or hammering operations will irritate the eyes, skin, and respiratory tract from

frictional action.



Many epoxy resin products are SENSITIZERS and can cause either allergic contact dermatitis , occupational asthma, or

both. Epoxy resins, especially those based on BISPHENOL A-EPICHLORHYDRIN, are among the most common

causes of occupational allergic contact dermatitis.

Sensitizing potency is a function of both chemical composition and molecular weight. The most potent sensitizers are

those with molecular weight less than 500.

Other symptoms of chronic exposure include burning of the eyes, blistering of the hands and face, coughing, irritation

of the upper respiratory tract, and increased nasal secretions.



Crystalline Silica - Quartz:



Exposure to respirable crystalline silica may cause delayed (chronic) lung disease known as silicosis; Acute or rapidly

developing silicosis may occur in a period of time in heavy exposure in certain occupations such as sandblasting,

quarrying or mining. The onset may increase with heavy smoking or poor hygiene.



The International Agency for the Research of Cancer (IARC) enabled a Working Group who reported that there is

sufficient evidence for the classification of crystalline silica as a Confirmed Human Carcinogen (Group I) (IARC,

1997,V.68).



In line with the IARC decision, Worksafe Australia has attempted to classify ALL forms of crystalline silica as

CONFIRMED HUMAN CARCINOGEN (CATEGORY 1). Established human carcinogens are those substances

known to be carcinogenic to humans. There is sufficient evidence to establish a casual association between human

exposure to these substances and the development of cancer.



12. ECOLOGICAL INFORMATION

There is no ecological information available for this product, however, large quantities should not be discharged into

drains, sewers or waterways.



13. DISPOSAL CONSIDERATIONS

Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor.



14. TRANSPORT INFORMATION

Road Transport

UN Number: None allocated

Proper Shipping Name: NONE ALLOCATED

Dangerous Goods Class: None allocated

Packing Group: None allocated

Label: Irritant (Xi)



Air Transport

UN Number: None allocated

Proper Shipping Name: NONE ALLOCATED

Dangerous Goods Class: None allocated

Packing Group: None allocated

Label: Irritant (Xi)

                       Material Safety Data Sheet

                               Page 6 of 7              Issue date: January 2005



                                      M-BOND A-12 (Part A)

14. TRANSPORT INFORMATION (Continued)

Sea Transport

UN Number: None allocated

Proper Shipping Name: NONE ALLOCATED

Dangerous Goods Class: None allocated

Packing Group: None allocated

Label: Irritant (Xi)



15. REGULATORY INFORMATION

Poison Schedule: S5 [Aust]

This product is a Scheduled (S5) Poison and must be stored, handled and used according to the appropriate regulations.



Inventory Status:

Australia (AICS)                       Y

United States (TSCA)                   Y

Canada (DSL)                           Y

Europe (EINECS/ELINCS)                 Y

Japan (MITI)                           Y

South Korea (KECL)                     Y



Y = all ingredients are on the inventory.



16. OTHER INFORMATION

Date of Preparation:



Issue date: January 2005                             Supercedes: March 22, 2000



Reasons for Update:

                       nd

1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets

   [NOHSC:2001(2003)].

2. Changes and /or addition made to all sections.



Key Legend Information:

NOHSC - National Occupational Health & Safety Commission {Formerly Worksafe}[Aust]

SUSDP - Standard for the Uniform Scheduling of Drugs and Poisons [Aust]

TWA - Time Weighted Average [Int]

STEL - Short Term Exposure Limit [Int]

AICS - Australian Inventory of Chemical Substances

EPA - Environmental Protection Agency [Int]

NIOSH - National Institute for Occupational Safety and Health [US]

AS 1940 - The storage and handling of flammable and combustible liquids [Aust]

AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]

AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]

IATA - International Aviation Transport Authority [Int]

ICAO - International Civil Aviation Organization [Int]

IMO - International Maritime Organisation. [Int]

IMDG - International Maritime Dangerous Goods [Int]

United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the

classification and labelling of Chemicals. [Int]

EU - European Union



[Aust/NZ] = Australian New Zealand

[Int] = International

[US] = United States of America

                      Material Safety Data Sheet

                               Page 7 of 7               Issue date: January 2005



                                      M-BOND A-12 (Part A)

16. OTHER INFORMATION (Continued)

Removal of the heading of Poison Schedule [Aust], in section 3 and 15 of this Material Safety Data Sheet (MSDS)

makes this a valid health and safety document in other international jurisdictions/countries. For full compliance please

contact your Federal, State or Local regulators for further information.



Disclaimer

To the best of our knowledge, the information provided above meets the requirements of European Union directives for

hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from

manufacturers of the original components. All animal test data has been obtained from the public domain, NO

ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form

of liability and/or responsibility for the application of this product.



Principal References:

Information supplied by manufacturer, reference sources including the public domain.



                                                  END OF MSDS