Material Safety Data Sheet
Page 1 of 6 Issue date: February 2005
M BOND CURING AGENT 15
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Davidson Measurement Pty. Ltd
ACN: 005 031 961 ABN: 29 005 031 961
Phone: 03 9580 4366
Fax: 03 9580 6499
Email: info@davidson.com.au
Web: www.davidson.com.au
Address: 1-3 Lakewood Boulevard,
Braeside, Victoria, 3195.
Product Name: M BOND CURING AGENT 15
Manufacturer's Product Code: MGM006E
Use: Two component, 100 %-solids epoxy system for critical applications including transducers.
2. HAZARDS IDENTIFICATION
HAZARDOUS ACCORDING TO EU CRITERIA
Hazard Category: Harmful (Xn), Corrosive (C), Flammable (F)
Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOOD
RISK PHRASES
R10 Flammable.
R21/22 Harmful in contact with skin and if swallowed.
R34 Causes burns.
R43 May cause sensitisation by skin contact.
SAFETY PHRASES
S1/2 Keep locked up and out of reach of children.
S26 In case of contact with eyes, rinse immediately with plenty of water and contact a doctor or Poisons Information
Centre.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, contact a doctor or Poisons Information Centre immediately and show
this container or label.
Road Transport
UN Number: 2684
Proper Shipping Name: DIETHYLAMINO PROPYLAMINE
Dangerous Goods Class: 3
Packing Group: III
Poison Schedule: S5 [Aust]
This material is a Scheduled S5 Poison and must be stored, handled and used according to the appropriate regulations.
Warning Statement:
Causes burns via all routes of exposure, long term effects will cause sensitisation by skin contact.
3. COMPOSITION / INFORMATION ON INGREDIENTS
SUBSTANCE NAME Proportion CAS Number
3-(DIETHYLAMINO)PROPYLAMINE 60 to 100 % 104-78-9
All other ingredients not hazardous according to EU Criteria.
Material Safety Data Sheet
Page 2 of 6 Issue date: February 2005
M BOND CURING AGENT 15
4. FIRST AID MEASURES
Swallowed:
If swallowed, DO NOT induce vomiting. If victim conscious, give 1 to 2 glasses of water to drink. Seek urgent medical
assistance.
Eye:
If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open.
Immediately transport to hospital or doctor.
Skin:
If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with soap and water.
If irritation persists immediately transport to hospital or doctor.
Inhaled:
Remove victim to fresh air. Apply resuscitation if victim is not breathing - Administer oxygen if breathing is difficult.
Transport to hospital or doctor immediately.
First Aid Facilities:
Eye wash fountain, safety shower and normal wash room facilities.
Advice to Doctor:
Treat symptomatically.
In case of poisoning, contact Poisons Information Centre
In Australia call Tel: 131126
In New Zealand Tel: 034747000
5. FIRE-FIGHTING MEASURES
Fire/Explosion Hazard
CAUTION: Use of water spray when fighting fire may be inefficient.
SUITABLE EXTINGUISHING MEDIA: Foam, dry chemical or carbon dioxide.
HAZARDS FROM COMBUSTION PRODUCTS: On combustion or on thermal decomposition (pyrolysis), there
will be a release of oxides of carbon, oxides of nitrogen and noxious smoke.
PRECAUTIONS FOR FIRE FIGHTERS AND SPECIAL PROTECTIVE EQUIPMENT: Self-contained
breathing apparatus (SCBA) required fo r fire -fighting personnel. If possible to do so safely, shut off fuel to fire.
HAZCHEM CODE: 2W [Aust]
FLAMMABILITY
Highly flammable and corrosive liquid. Avoid all sources of ignition, heat and naked flames.
Flash Point: 58掳C
Flammability Limits: LEL: 1.4 % UEL: 11.6 %
Autoignition Temperature: 215掳C
6. ACCIDENTAL RELEASE MEASURES
Emergency Procedures:
Flammable liquid and corrosive liquid. Avoid all sources of ignition. Keep unnecessary people away;. Ventilate area.
Wear suitable protective equipment as outlined under personal protection in this MSDS.
Methods and Materials for Containment and Clean Up Procedures:
Throw diatomaceous earth onto spill. DO NOT use sawdust. Use non-sparking tools or HEPA vacuum system to pick
up. Place into labelled drum(s) for later disposal. If risk of fire, blanket the spill with foam or use water fog to disperse
vapour clouds. Consult an expert regarding disposal of this product.
Emergency information(Transport):
Dangerous Goods - Initial Emergency Response Guide (IERG) (SAA/SNZ HB76:1997)
Material Safety Data Sheet
Page 3 of 6 Issue date: February 2005
M BOND CURING AGENT 15
For LIQUIDS - Flammable, Toxic and/or Corrosive Guide No: 19
7. HANDLING AND STORAGE
Precautions for Safe Handling:
Avoid contact with eyes and skin. Avoid breathing of vapours. Store in a cool place and out of direct sunlight. Store
away from sources of heat or ignition. Store away from oxidizing agents. Store below 248 C, to maximize shelf-life.
Conditions for Safe Storage:
Keep containers tightly closed, when not using the product. Store in original packages as approved by manufacturer.
For further information please refer to the Engineering Controls of this MSDS.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards
No exposure standards have been assigned by [NOHSC] for this product.
Engineering Controls
Flammable and corrosive liquid. Single significant exposure may cause severe injury or death. Maintain adequate
ventilation at all times. Prevent accumulation of vapours in hollows or sumps. Eliminate any sources of ignition.
Personal Protection Equipment
GLOVES: Nitrile or neoprene.
EYES: Chemical goggles or spectacles with side shields to protect eyes.
RESPIRATORY PROTECTION: Avoid breathing of vapours. Select and use respirators in accordance with AS/NZS
1715/1716. When the concentration of airborne contaminants reach the exposure standards then the use of a half-face
respirator fitted with an acid vapour cartridge is recommended. For high concentration use an atmosphere-supplied,
positive pressure demand self-contained or airline breathing apparatus supplied air respirator complying with the
requirements of AS/NZS 1715 is recommended. Filter capacity and respirator type depends on exposure levels.If
entering spaces where the airborne concentration of a contaminant is unknown then the use of a Self-contained
breathing apparatus (SCBA) with positive pressure air supply complying with AS/NZS 1715 / 1716, or any other
acceptable International Standard is recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Colorless liquid.
Boiling Point: 159掳C
Vapour Pressure: 19.5 mmHg @ 70掳C
Specific Gravity: 0.826
Flash Point: 58掳C
Flammability Limits: LEL: 1.4 % UEL: 11.6 %
Solubility in Water: Negligible.
Other Properties
Vapor Density (Air = 1): 4.4
Volatile Organic Compounds : 0%
Autoignition Temperature: 215掳C
Material Safety Data Sheet
Page 4 of 6 Issue date: February 2005
M BOND CURING AGENT 15
10. STABILITY AND REACTIVITY
CHEMICAL STABILITY:
Stable under normal conditions of use.
CONDITIONS TO AVOID:
Ignition sources and mixing with incompatibles.
INCOMPATIBLE MATERIALS:
Strong mineral acids (sulfuric, nitric and hydrochloric), and oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
Decomposes on heating emitting oxides of carbon , oxides of nitrogen and noxious smoke.
HAZARDOUS REACTIONS:
Will not occur.
11. TOXICOLOGICAL INFORMATION
ACUTE HEALTH EFFECTS:
Swallowed:
Harmful if swallowed. Will cause burns to the mouth, mucous membranes, throat, oesophagus and stomach. If
sufficient quantities are ingested (swallowed) death may occur.
Eye:
Will cause burns to the eyes with effects including: Pain, tearing, corneal opacity and if duration of exposure is long
enough, permanent impairment of vision or blindness will occur.
Skin:
Harmful by skin contact. This substance will cause sensitisation by skin contact, which may lead to allergic contact
dermatitis. Will cause burns to the skin, with effects including; Redness, localised pain, ulcerations, blistering and
dermal and epidermal injury.
Inhaled:
May cause irritation to the nose, throat and respiratory system. However, this is only anticipated if the product is heated.
Chronic:
Prolonged or repeated skin contact will lead to necrosis (death) of the skin.
3-Diethyaminopropylamine:
Oral LD50(rat): 1,410 mg/kg
Dermal LD50(rabbit): 750 mg/kg
REACTION: Severe
Irritation:
Eye - Standard Draize Test:
Rabbit(Eyes): 100 碌g/24 H;
REACTION: Severe
Information from the literature indicates as depicted above that 3-diethylaminiopropylamine is a corrosive material and
is considered to be a sensitizer by skin contact.
12. ECOLOGICAL INFORMATION
No information is available for this product, however, large quantities should not be discharged to waterways, sewers or
drains.
Material Safety Data Sheet
Page 5 of 6 Issue date: February 2005
M BOND CURING AGENT 15
13. DISPOSAL CONSIDERATIONS
Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise flammable
and corrosive nature. If large amounts of the product enter waterways, sewers or streams, immediately contact the
Environmental Protection Agency or your Local Waste Management Authority.
14. TRANSPORT INFORMATION
Road Transport
UN Number: 2684
Proper Shipping Name: DIETHYLAMINO PROPYLAMINE
Dangerous Goods Class: 3
Packing Group: III
Label: Harmful (Xn), Corrosive (C), Flammable (F)
Air Transport
UN Number: 2684
Proper Shipping Name: DIETHYLAMINO PROPYLAMINE
Dangerous Goods Class: 3
Packing Group: III
Label: Harmful (Xn), Corrosive (C), Flammable (F)
Sea Transport
UN Number: 2684
Proper Shipping Name: DIETHYLAMINO PROPYLAMINE
Dangerous Goods Class: 3
Packing Group: III
Label: Harmful (Xn), Corrosive (C), Flammable (F)
15. REGULATORY INFORMATION
Poison Schedule: S5 [Aust]
This material is a Scheduled S5 Poison and must be stored, handled and used according to the appropriate regulations.
Inventory Status:
Australia (AICS) Y
United States (TSCA) Y
Europe (EINECS/ELINCS) Y
Y = all ingredients are on the inventory.
16. OTHER INFORMATION
Date of Preparation:
Issue date: February 7, 2005 Supercedes: September 8, 2003
Reasons for Update:
nd
1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets
[NOHSC:2001(2003)].
2. Changes and /or addition made to all sections.
Key Legend Information:
NOHSC - National Occupational Health & Safety Commission [Aust]
SUSDP - Standard for the Uniform Scheduling of Drugs and Poisons [Aust]
TWA - Time Weighted Average [Int]
STEL - Short Term Exposure Limit [Int]
AICS - Australian Inventory of Chemical Substances
Material Safety Data Sheet
Page 6 of 6 Issue date: February 2005
M BOND CURING AGENT 15
16. OTHER INFORMATION (Continued)
EPA - Environmental Protection Agency [Int]
NIOSH - National Institute for Occupational Safety and Health [US]
AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]
AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]
(SAA/SNZ HB76:1997) - Dangerous Goods - Initial Emergency Response Guide [Aust/NZ]
AS 1940 - The Storage and Handling of Flammable and Combustible Liquids [Aust]
Hazchem Code: Designation for fire fighters [Aust]
IATA - International Aviation Transport Authority [Int]
ICAO - International Civil Aviation Organization [Int]
IMO - International Maritime Organisation. [Int]
IMDG - International Maritime Dangerous Goods [Int]
United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the
classification and labelling of Chemicals. [Int]
EU - European Union [Int]
[Aust/NZ] = Australian/New Zealand
[Int] = International
[US] = United States of America
Principal References:
Information supplied by manufacturer.
Disclaimer
To the best of our knowledge, the information provided above meets the requirements of European Union directives for
hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from
manufacturers of the original components. All animal test data has been obtained from the public domain, NO
ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form
of liability and/or responsibility for the application of this product.
END of MSDS
|