Material Safety Data Sheet

                               Page 1 of 7                Issue date: January 2005



                                              M-BOND 43-B

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Davidson Measurement Pty. Ltd

ACN: 005 031 961 ABN: 29 005 031 961

Phone: 03 9580 4366

Fax:    03 9580 6499

Email: info@davidson.com.au

Web: www.davidson.com.au

Address: 1-3 Lakewood Boulevard,

          Braeside, Victoria, 3195.

Product Name: M -BOND 43-B

Manufacturer's Product Code: MGM001E

Use: Single-component, solvent- thinned, epoxy adhesive normally used in transducer applications. May be used both

as an adhesive and as a protective coating.



DAVIDSON MEASUREMENT PTY LTD

1-3 Lakewood Blvd.

BRAESIDE 3195 VIC

Tel: 61 3 9580 4366

Fax: 61 3 9580 6499



2. HAZARDS IDENTIFICATION

HAZARDOUS ACCORDING TO EU CRITERIA

Hazard Category: Harmful (Xn), Irritant (Xi), Flammable (F)



Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOODS.



RISK PHRASES

R11 Highly flammable

R20/21 Harmful by inhalation and in contact with skin.

R36/37/38 Irritating to eyes, respiratory system and skin.

R43 May cause sensitisation by skin contact.



SAFETY PHRASES

S7/9 Keep container tightly closed and in a well ventilated place.

S16 Keep away from sources of ignition - No smoking.

S28 After contact with skin, wash immediately with plenty of soap and water.

S33 Take precautionary measures against static discharge.

S37/39 Wear suitable gloves and eye/face protection.



Poison Schedule: S5 [Aust]

This product is a Scheduled (S5) Poison and must be stored, handled and used according to the appropriate regulations.



Warning Statement:

Harmful by inhalation and skin contact. Will cause irritation to skin and allergic skin sensitisation. Highly flammable,

keep away from sources of ignition.



3. COMPOSITION / INFORMATION ON INGREDIENTS

SUBSTANCE NAME                                                  Proportion           CAS Number

METHYL ETHYL KETONE                                             30 to 60 %           78-93-3

XYLENE                                                          10 to 30 %           1330-20-7

BISPHENOL A-(EPICHLORHYDRIN) EPOXY RESIN                        10 to 30 %           25068-38-6

DIACETONE ALCOHOL                                               10 to 30 %           123-42-2

ADDITIVES -NON HAZARDOUS                                        Balance              Mixture



All other ingredients determined not to be hazardous according to the EU criteria.

                       Material Safety Data Sheet

                                Page 2 of 7                Issue date: January 2005



                                                M-BOND 43-B



4. FIRST AID MEASURES

Swallowed:

If swallowed, DO NOT induce vomiting. If victim is conscious give water to drink. Immediately transport to hospital or

doctor.



Eye:

If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open.

Urgently transport to hospital or doctor.



Skin:

If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with water and soap.

If irritation persists transport to hospital or doctor.



Inhaled:

Move victim to fresh air. Apply resuscitation if victim is not breathing.



First Aid Facilities:

Eye wash fountain, safety shower and normal wash room facilities.



Advice to Doctor:

Treat symptomatically.

In case of poisoning, contact Poisons Information Centre

In Australia call Tel: 131126

In New Zealand Tel: 034747000



5. FIRE-FIGHTING MEASURES

SUITABLE EXTINGUISHING MEDIA: Use dry chemical, carbon dioxide or foam.

HAZARDS FROM COMBUSTION PRODUCTS: Under fire conditions, toxic and corrosive fumes are emitted. On

combustion or on thermal decomposition (pyrolysis), there will be a release of oxides of carbon

PRECAUTIONS FOR FIRE FIGHTERS AND SPECIAL PROTECTIVE EQUIPMENT: Self-contained

breathing apparatus (SCBA) required for fire -fighting personnel. If possible to do so safely, shut off fuel to fire. Use

water spray to spray to cool fire-exposed surfaces and to protect personnel.



Hazchem Code: 3[Y]E [Aust]



Flammability:

This material is a HIGHLY FLAMMABLE liquid.

Flash Point: -7°C

Flammability Limits:          LEL: 1.6 % UEL: 10.5 %



6. ACCIDENTAL RELEASE MEASURES

Emergency Procedures:

Highly flammable liquid. Avoid all sources of ignition. Keep unnecessary people away; Isolate hazard area and deny

entry. Ventilate area. Wear suitable protective equipment as outlined under personal protection in this MSDS.



Methods and Materials for Containment and Clean Up Procedures:

Throw vermiculite or diatomaceous earth onto spill. DO NOT use sawdust. Use non-sparking tools or HEPA vacuum

system to pick up. Place into labelled drum(s) for later disposal.



Emergency information(Transport):

Dangerous Goods - Initial Emergency Response Guide (IERG) (SAA/SNZ HB76:1997)

For LIQUIDS - Highly flammable, Guide No: 14

                      Material Safety Data Sheet

                               Page 3 of 7               Issue date: January 2005



                                              M-BOND 43-B

7. HANDLING AND STORAGE

Precautions for Safe Handling:

Highly flammable liquid. Avoid ignition sources. Do not get in eyes. Avoid direct or prolonged contact with skin.

Provide adequate ventilation.



Conditions for Safe Storage:

Keep containers tightly closed, when not using the product. Store in original packages as approved by manufacturer.

Store in an area that is dry and well-ventilation away from ignition sources. Store at ambient temperatures. The floor of

the depot should be impermeable. Store away from strong alkalis, acids and oxidizing agents. For further information

please refer to the Engineering Controls of this MSDS.



8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure Standards



No exposure standards are available for this product, however, the following exposure standards have been assigned by

[NOHSC] to the following components of the product.



METHYL ETHYL KETONE

[NOHSC]

                      3

[TWA]150 ppm 445 mg/m

                      3

[STEL]300 ppm 890 mg/m



Notices: A



XYLENE

[NOHSC]

                      3

[TWA]80 ppm 350 mg/m

                      3

[STEL]150 ppm 655 mg/m



Notices: A;R



DIACETONE ALCOHOL

[NOHSC]

                    3

[TWA]50 ppm 238 mg/m



Notices: H



Engineering Controls

Highly flammable liquid. Maintain adequate ventilation at all times. Prevent accumulation of vapours in hollows or

sumps. Eliminate any sources of ignition. Elevated temperature or mechanical action may form vapours, mists or fumes

which may require local exhaust ventilation systems.



Personal Protection Equipment

GLOVES: If product has spilt, or package is broken, then the use of neoprene gloves is recommended.

EYES: Chemical goggles or spectacles with side shields to protect eyes.

RESPIRATORY PROTECTION: Avoid breathing of vapours. Select and use respirators in accordance with AS/NZS

1715/1716. When gases exceed the exposure standards then the use of a half-face respirator fitted with an organic

vapour cartridge is recommended. For high concentration use an atmosphere-supplied, positive pressure demand self-

contained or airline breathing apparatus, complying with the requirements of AS/NZS 1715 is recommended. Filter

capacity and respirator type depends on exposure levels and type of contaminant. If entering spaces where the airborne

concentration of a contaminant is unknown then the use of a Self-contained breathing apparatus (SCBA) with positive

pressure air supply complying with AS/NZS 1715 / 1716, or any other acceptable International Standard is

recommended.

                       Material Safety Data Sheet

                                Page 4 of 7               Issue date: January 2005



                                                  M-BOND 43-B

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance:                          Amber colored liquid, acetone-like odor.

Boiling Point:                       82°C

Melting Point:                       Not available.

Vapour Pressure:                     100 mmHg.

Specific Gravity:                    0.92

Flash Point:                         - 7°C

Flammability Limits:                 LEL: 1.6 % UEL: 10.5 %

Solubility in Water:                 Insoluble (< 20 %)



Other Properties

Vapor Density (Air = 1):             3.5

Evaporation Rate (BuAc = 1):         2.8

Volatile Organic Compounds:          738g/liter



10. STABILITY AND REACTIVITY

CHEMICAL STABILITY:

Stable under normal conditions of use.



CONDITIONS TO AVOID:

Heat, flames, ignition sources, light and air.



HAZARDOUS DECOMPOSITION PRODUCTS:

Emits oxides of carbon when heated to decomposition.



INCOMPATIBLE MATERIALS:

Strong oxidizing agents, strong bases, strong reducing agents.



HAZARDOUS REACTIONS:

Will not occur.



11. TOXICOLOGICAL INFORMATION

ACUTE HEALTH EFFECTS

Swallowed:

May cause irritation mouth, throat and stomach with effects including: Headache, nausea, vomiting, narcosis and

possible central nervous system depression.



Eye:

Will cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision. Depending upon

duration of exposure, eye damage may occur.



Skin:

Harmful by skin contact. This product will cause sensitisation by skin contact, which may lead to allergic contact

dermatitis. Will cause irritation to the skin, with effects including; Redness, itchiness, and rash.



Inhaled:

Harmful if inhaled. Will cause central nervous system depression.

Will cause irritation to the nose, throat and respiratory system with effects including: Dizziness, headache staggering

gait, loss of co-ordination, nausea and if the concentration of vapours is high enough, unconsciousness and possibly

death.



Chronic:

Prolonged or repeated exposure may lead to irreversible damage to health.

There is no toxicological information available for this product, however, for the ingredient(s):



Methyl Ethyl Ketone:

                      Material Safety Data Sheet

                                Page 5 of 7              Issue date: January 2005



                                              M-BOND 43-B

11. TOXICOLOGICAL INFORMATION (Continued)

Oral LD50(rat): 2,737 mg/kg

Dermal LD50(rabbit): 6,480 mg/kg

Inhalation LC50(rat): 23500 mg/m3/8H



Xylene:



Oral LD50(rat): 4,300 mg/kg

Dermal LD50(rabbit): >1,700 mg/kg

Inhalation LC50(rat): 5,000 ppm/4H



Diacetone alcohol:



Oral LD50(rat): 4,000 mg/kg



EPOXY RESINS:



Epoxy resins can irritate the skin, eyes, and respiratory tract. However, acute toxicity is generally low.

Generally the toxicity of an epoxy resin decreases with increasing molecular weight of the polymer. Exposure to cured

resin dust from sanding, grinding, or hammering operations will irritate the eyes, skin, and respiratory tract from

frictional action.



Many epoxy resin products are SENSITIZERS and can cause either allergic contact dermatitis, occupational asthma, or

both. Epoxy resins, especially those based on BISPHENOL A, are among the most common causes of occupational

allergic contact dermatitis.

Sensitizing potency is a function of both chemical composition and molecular weight. The most potent sensitizers are

those with molecular weight less than 500.

Other symptoms of chronic exposure include burning of the eyes, blistering of the hands and face, coughing, irritation

of the upper respiratory tract, and increased nasal secretions.



Oral LD50(rat): > 5,000 mg/kg



12. ECOLOGICAL INFORMATION

No information is available for this product, however, large quantities should not be discharged to waterways, sewers or

drains.



13. DISPOSAL CONSIDERATIONS

Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise flammable

nature.



14. TRANSPORT INFORMATION

Road Transport:

UN Number: 1993

Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains METHYL ETHYL KETONE AND XYLENE )

Dangerous Goods Class: 3

Packing Group: II

Labels: Harmful (Xn), Irritant (Xi), Flammable (F)



Air Transport:

UN Number: 1993

Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains METHYL ETHYL KETONE AND XYLENE )

Dangerous Goods Class: 3

Packing Group: II

Labels: Harmful (Xn), Irritant (Xi), Flammable (F)

                       Material Safety Data Sheet

                               Page 6 of 7              Issue date: January 2005



                                             M-BOND 43-B

14. TRANSPORT INFORMATION (Continued)

Marine Transport:

UN Number: 1993

Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains METHYL ETHYL KETONE AND XYLENE )

Dangerous Goods Class: 3

Packing Group: II

Labels: Harmful (Xn), Irritant (Xi), Flammable (F)



15. REGULATORY INFORMATION

Poison Schedule: S5 [Aust]

This product is a Scheduled (S5) Poison and must be stored, handled and used according to the appropriate regulations.



Inventory Status:

Australia (AICS)                       Y

United States (TSCA)                   Y

Canada (DSL)                           Y

Europe (EINECS/ELINCS)                 Y

Japan (MITI)                           Y

South Korea (KECL)                     Y



Y = all ingredients are on the inventory.



16. OTHER INFORMATION

Date of Preparation:



Issue date: January 27, 2005                         Supercedes: July 22, 2004 (update), Dec 27, 2000



Reasons for Update:

                       nd

1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets

   [NOHSC:2001(2003)].

2. Changes and /or addition made to all sections.



Key Legend Information:

NOHSC - National Occupational Health & Safety Commission [Aust]

SUSDP - Standard for the Uniform Scheduling of Drugs and Poisons [Aust]

TWA - Time Weighted Average [Int]

STEL - Short Term Exposure Limit [Int]

AICS - Australian Inventory of Chemical Substances

EPA - Environmental Protection Agency [Int]

NIOSH - National Institute for Occupational Safety and Health [US]

AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]

AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]

(SAA/SNZ HB76:1997) - Dangerous Goods - Initial Emergency Response Guide [Aust/NZ]

AS 1940 - The Storage and Handling of Flammable and Combustible Liquids [Aust]

IATA - International Aviation Transport Authority [Int]

ICAO - International Civil Aviation Organization [Int]

IMO - International Maritime Organisation. [Int]

IMDG - International Maritime Dangerous Goods [Int]

United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the

classification and labelling of Chemicals. [Int]

EU - European Union [Int]



[Aust/NZ] = Australian/New Zealand

[Int] = International

[US] = United States of America

                     Material Safety Data Sheet

                              Page 7 of 7              Issue date: January 2005



                                            M-BOND 43-B

16. OTHER INFORMATION (Continued)

Principal References:

Information supplied by manufacturer.



Disclaimer

To the best of our knowledge, the information provided above meets the requirements of European Union directives for

hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from

manufacturers of the original components. All animal test data has been obtained from the public domain, NO

ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form

of liability and/or responsibility for the application of this product.



                                           End of MSDS