Material Safety Data Sheet

                             Page 1 of 7               Issue date: September 2004



                                                 M-COAT C

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Davidson Measurement Pty. Ltd

ACN: 005 031 961 ABN: 29 005 031 961

Phone: 03 9580 4366

Fax:    03 9580 6499

Email: info@davidson.com.au

Web: www.davidson.com.au

Address: 1-3 Lakewood Boulevard,

         Braeside, Victoria, 3195.

Product Name: M -COAT C

Manufacturer's Product Code: MGM023E

Use: Recommended for lab and field installations which require a high degree of protection in thin coatings.



2. HAZARDS IDENTIFICATION

SUBSTANCE NAME                                                  Proportion           CAS Number

METHANOL*                                                       <2%                  67-56-1

METHYLTRIMETHOXYSILANE                                          <4%                  1185-55-3

PETROLEUM ETHER                                                 1 to 10 %            8032-32-4

XYLENE                                                          10 to 30 %           1330-20-7

ALKYL SILOXANE AND OTHER NON-HAZARDOUS                          10 to 30 %           Proprietary

INGREDIENTS



* Methanol is formed when the product is exposed to water or humidity, and is part of the "setting-process"of the M-

COAT C.



All other ingredients determined not to be hazardous according to the EU criteria.



3. COMPOSITION / INFORMATION ON INGREDIENTS

Hazardous according to the EU criteria



Hazard Category: Harmful (Xn), Irritant (Xi), Flammable (F)



Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOODS.



RISK PHRASES

R11 Highly flammable

R20/21/22 Harmful by inhalation, in contact with skin and if swallowed.

R38 Irritating to skin.

R65 Harmful: May cause lung damage if swallowed.



SAFETY PHRASES

S2 Keep out of reach of children.

S7 Keep container tightly closed.

S16 Keep away from sources of ignition - No smoking.

S24/25 Avoid contact with skin and eyes.

S62 If swallowed, do not induce vomiting; Seek medical advice immediately and show this container or label.



Poison Schedule: S5 [Aust]

This product is a Scheduled (S5) Poison and must be stored, handled and used according to the appropriate regulations.



Warning Statement:

Product is flammable, harmful by skin, eye and by inhalation. Risk of aspiration of product into lungs leading to

chemical pneumonia.

                       Material Safety Data Sheet

                              Page 2 of 7                Issue date: September 2004



                                                   M-COAT C

4. FIRST AID MEASURES

Swallowed:

If swallowed, DO NOT induce vomiting. Give a glass of water to drink. If vomiting occurs spontaneously, keep head

below hips to prevent aspiration of liquid into the lungs. Seek urgent medical assistance.



Eye:

If material is splashed into eyes, flush with plenty of water for at least 15 minutes, ensuring eye lids are held open.

Immediately transport to hospital or doctor.



Skin:

If material is splashed onto the skin, remove any contaminated clothing and wash skin thoroughly with soap and water.

If irritation persists transport to hospital or doctor.



Inhaled:

Remove victim to fresh air. Apply resuscitation if victim is not breathing - Administer oxygen if breathing is difficult.

Transport to hospital or doctor immediately.



First Aid Facilities:

Eye wash fountain, safety shower and normal wash room facilities.



Advice to Doctor:

Treat symptomatically, treat as for hydrocarbon liquid exposure.

In case of poisoning, contact Poisons Information Centre

In Australia call Tel: 131126

In New Zealand Tel: 034747000



5. FIRE-FIGHTING MEASURES

SUITABLE EXTINGUISHING MEDIA: Use dry chemical, carbon dioxide or foam.

HAZARDS FROM COMBUSTION PRODUCTS: Under fire conditions, toxic and corrosive fumes are emitted. On

combustion or on thermal decomposition (pyrolysis), there will be a release of oxides of carbon and oxides of nitrogen.

PRECAUTIONS FOR FIRE FIGHTERS AND SPECIAL PROTECTIVE EQUIPMENT: Self-contained

breathing apparatus (SCBA) required for fire -fighting personnel. If possible to do so safely, shut off fuel to fire. Use

water spray to spray to cool fire-exposed surfaces and to protect personnel.



Flammability:

This material is a FLAMMABLE liquid.

Flash Point: 4.4°C

Flammability Limits (vol / vol %): Lower: 0.9           Upper: 6.0



Hazchem Code: 3[Y]E



6. ACCIDENTAL RELEASE MEASURES

Emergency Procedures:

Highly flammable liquid. Avoid all sources of ignition. Keep unnecessary people away; Isolate hazard area and deny

entry. Ventilate area. Wear suitable protective equipment as outlined under personal protection in this MSDS.



Methods and Materials for Containment and Clean Up Procedures:

Throw vermiculite or diatomaceous earth onto spill. DO NOT use sawdust. Use non-sparking tools or HEPA vacuum

system to pick up. Place into labelled drum(s) for later disposal.



Emergency information(Transport):

Dangerous Goods - Initial Emergency Response Guide (SAA/SNZ HB76:1997)

For LIQUIDS - Highly flammable, Guide No: 14

                      Material Safety Data Sheet

                             Page 3 of 7              Issue date: September 2004



                                                 M-COAT C

7. HANDLING AND STORAGE

Precautions for Safe Handling:

Highly flammable liquid. Avoid ignition sources. Do not get in eyes. Avoid direct or prolonged contact with skin.

Provide adequate ventilation.



Conditions for Safe Storage:

Keep containers tightly closed, when not using the product. Store in original packages as approved* by manufacturer.

Store in an area that is dry and well-ventilation away from ignition sources. Store below 278 C. The floor of the depot

should be impermeable. Store away from strong alkalis, acids and oxidizing agents. For further information please refer

to the Engineering Controls of this MSDS.



8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Exposure Standards



No exposure standards are available for this product, however, the following exposure standards have been assigned by

[NOHSC] to the following components of the product:



PETROLEUM ETHER

(ACGIH)

[TWA] 300 ppm



XYLENE

[NOHSC]

                      3

[TWA]80 ppm 350 mg/m

                      3

[STEL]150 ppm 655 mg/m



Notices: A;R



METHANOL

[NOHSC]

                       3

[TWA] 200 ppm 262 mg/m

                       3

[STEL] 250 ppm 328 mg/m

Notices: H



Engineering Controls

Highly flammable liquid. Maintain adequate ventilation at all times. Prevent accumulation of vapours in hollows or

sumps. Eliminate any sources of ignition. Elevated temperature or mechanical action may form vapours, mists or fumes

which may require local exhaust ventilation systems.



Personal Protection Equipment

GLOVES: Not normally required, however, if product has spilt, or package is broken, then the use of neoprene gloves

is recommended.

EYES : Chemical goggles or faceshield to protect eyes.

RESPIRATORY PROTECTION: Avoid breathing of vapours/gases. Select and use respirators in accordance with

AS/NZS 1715/1716. When gases/vapours exceed the exposure standards then the use of a half-face respirator fitted with

an organic vapour cartridge is recommended. For high concentration use an atmosphere-supplied, positive pressure

demand self-contained or airline breathing apparatus, complying with the requirements of AS/NZS 1715 is

recommended. Filter capacity and respirator type depends on exposure levels and type of contaminant.

                      Material Safety Data Sheet

                             Page 4 of 7                Issue date: September 2004



                                                   M-COAT C

9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance:                         Milky translucent liquid; naphthalene odour.

Boiling Point:                      107°C

Vapour Pressure:                    25 mmHg @ 20°C

Specific Gravity:                   0.85

Flash Point:                        4.4°C

Flammability Limits:                LEL: 0.9 % UEL: 6.0 %

Solubility in Water:                Negligible.



Other Properties

Vapor Density (Air = 1):             3.7

Evaporation Rate (BuAc = 1):          0.6

Volatile Organic Compounds :         300 g/liter



10. STABILITY AND REACTIVITY

CHEMICAL STABILITY:

Stable under normal conditions of use.



CONDITIONS TO AVOID:

Ignition sources and mixing with incompatibles.



INCOMPATIBLE MATERIALS:

Strong mineral acids (sulfuric, nitric and hydrochloric), and oxidizing agents.



HAZARDOUS DECOMPOSITION PRODUCTS:

Decomposes on heating emitting oxides of carbon and oxides of nit rogen.



HAZARDOUS REACTIONS:

Will not occur.



11. TOXICOLOGICAL INFORMATION

Hazardous according to the EU criteria



Hazard Category: Harmful (Xn), Irritant (Xi), Flammable (F)



Hazard Classification: HAZARDOUS SUBSTANCE, DANGEROUS GOODS.



Xylene:



Oral LD50(rat): 4,300 mg/kg

Dermal LD50(rabbit): >1,700 mg/kg

Inhalation LC50(rat): 5,000 ppm/4H



Irritation Eye Rabbit: 87 mg mild (Std. Draize)

Irritation Skin Rabbit: 500 mg/24 Hr (Moderate, Std. Draize)



There is no conclusive evidence of xylene causing carcinogenic, mutagenic or teratogenic (toxic to reproduction)

effects.

                        Material Safety Data Sheet

                               Page 5 of 7               Issue date: September 2004



                                                   M-COAT C

11. TOXICOLOGICAL INFORMATION (Continued)

Methanol:



Swallowing as little as 28 - ~ 130 g of methanol has been reported to cause death of serious irreversible injury such as

blindness in humans. Studies in experimental animals indicate that the metabolism of methanol to formic acid results in

metabolic acidosis and reversible or irreversible damage to the optic nerve. Ingestion of this product, even in small

amounts, can cause blindness and death. Onset of symptoms may be delayed for 18 - 24 hours.



Rat

Inhalation LC50(rat): 64000 ppm/4H

Oral LD50(rat): 5628 mg/kg



Irritation - Rabbit Draize test skin



Dermal LD50(rabbit): 20 mg/24H

REACTION: Moderate



ACUTE HEALTH EFFECTS

Swallowed:

Harmful if swallowed. Product forms methanol on exposure to water or humidity, which will cause damage to the

central nervous system and if exposure is prolonged blindness, due to effects on the optic nerve will occur. Vomiting,

may cause this product to be aspirated into the lungs, which may lead to chemical pneumonitis.



Eye:

May cause irritation to the eyes, with effects including: tearing, pain, stinging and blurred vision.



Skin:

Harmful by skin contact. Product may be absorbed through the skin with resultant toxic effects.

Will cause irritation to the skin, with effects including; Redness, itchiness, and drying/defatting.



Inhaled:

Harmful if inhaled. May cause central nervous system and systemic poisoning as outlined for swallowing.

May cause irritation to the nose, throat and respiratory system with effects including: Dizziness, headache, coughing,

loss of co-ordination, chest pains and narcosis.



Chronic:

Prolonged or repeated skin contact may lead to dermatitis.

Prolonged or repeated exposure or deliberately concentrating and inhaling the vapour(s) may result in lung function

incapacity or death.



12. ECOLOGICAL INFORMATION

No information is available for this product, however, large quantities should not be discharged to waterways, sewers or

drains.



13. DISPOSAL CONSIDERATIONS

Refer to appropriate authority in your State. Dispose of material through a licensed waste contractor. Advise flammable

nature.

                       Material Safety Data Sheet

                             Page 6 of 7              Issue date: September 2004



                                                M-COAT C

14. TRANSPORT INFORMATION

Road Transport:

UN Number: 1993

Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains PETROLEUM ETHER and XYLENE)

Dangerous Goods Class: 3

Packing Group: II

Labels: Harmful(Xn), Irritant(Xi ), Flammable (F)



Marine Transport:

UN Number: 1993

Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains PETROLEUM ETHER and XYLENE)

Dangerous Goods Class: 3

Packing Group: II

Labels: Harmful(Xn), Irritant(Xi ), Flammable (F)



Air Transport:

UN Number: 1993

Proper Shipping Name: FLAMMABLE LIQUID, N.O.S.(Contains PETROLEUM ETHER and XYLENE)

Dangerous Goods Class: 3

Packing Group: II

Labels: Harmful(Xn), Irritant(Xi ), Flammable (F)



15. REGULATORY INFORMATION

Poison Schedule: S5

This product is a Scheduled (S5) Poison and must be stored, handled and used according to the appropriate regulations.



Inventory Status:

Australia (AICS)                       Y

United States (TSCA)                   Y

Canada (DSL)                           Y

Europe (EINECS/ELINCS)                 Y

Japan (MITI)                           Y

South Korea (KECL)                     Y



Y = all ingredients are on the inventory.



16. OTHER INFORMATION

Date of Preparation:



Issue date: September 14, 2004                                Supercedes: March 22, 2000



Reasons for Update:

                       nd

1. Alignment with the 2 Edition of National Code of Practice for the Preparation of Material Safety Data Sheets

   [NOHSC:2001(2003)].

2. Changes and /or addition made to all sections.



Key Legend Information:

NOHSC - National Occupational Health & Safety Commission [Aust]

TWA - Time Weighted Average [Int]

STEL - Short Term Exposure Limit [Int]

AICS - Australian Inventory of Chemical Substances

EPA - Environmental Protection Agency [Int]

NIOSH - National Institute for Occupational Safety and Health [US]

AS/NZS 1715 - Selection, use and maintenance of respiratory protective devices. [Aust/NZ]

AS/NZS 1716 - Respiratory protective devices. [Aust/NZ]

                     Material Safety Data Sheet

                            Page 7 of 7              Issue date: September 2004



                                               M-COAT C

16. OTHER INFORMATION (CONTINUED)

(SAA/SNZ HB76:1997) - Dangerous Goods - Initial Emergency Response Guide [Aust/NZ]

IATA - International Aviation Transport Authority [Int]

ICAO - International Civil Aviation Organization

IMO - International Maritime Organisation. [Int]

IMDG - International Maritime Dangerous Goods

United Nations Recommendations for the Transport of Dangerous Goods and Globally Harmonized System for the

classification and labelling of Chemicals. [Int]

EU - European Union



[Aust/NZ] = Australian/New Zealand

[Int] = International

[US] = United States of America



Principal References:

Information supplied by manufacturer.



Disclaimer

To the best of our knowledge, the information provided above meets the requirements of European Union directives for

hazardous substances which have been tested as a whole. The data provided on this Material Safety Data Sheet is from

manufacturers of the original components. All animal test data has been obtained from the public domain, NO

ANIMAL TESTS have been conducted by Davidson Pty Ltd. Davidson Pty Ltd specifically disclaims any and all form

of liability and/or responsibility for the application of this product.



                                           End of MSDS